Effects of Dietary Supplementation of Barodon on Growth Performance,Innate Immunity and Disease Resistance of Juvenile Olive Flounder,Paralichthys olivaceus,Against Streptococcus iniae

This study was conducted to evaluate the effects of dietary supplementation of Barodon, an anionic alkali mineral complex, on growth, feed utilization, humoral innate immunity and disease resistance of olive flounder. A basal experimental diet was used as a control and supplemented with 0.1, 0.2, 0.3, 0.4, or 0.5% Barodon. Triplicate groups of fish (26.4 ± 0.2 g) were fed one of the diets to apparent satiation twice daily for 10 wk. The growth performance was enhanced (P < 0.05) linearly and quadratically in fish fed diets containing Barodon compared with that in fish fed the control. Feed utilization was significantly improved by Barodon supplementation. Serum lysozyme and antiprotease activities were increased quadratically in Barodon fed groups. Also, significantly higher superoxide dismutase activity was found in Barodon‐fed fish. Dietary supplementation of 0.1–0.3% Barodon resulted in significant enhancement of fish disease resistance against Streptococcus iniae. The findings in this study indicate that dietary supplementation of Barodon can enhance growth, feed utilization, innate immunity, and disease resistance of olive flounder and that the optimum level seems to be 0.1% in diets.     

Novel Caryophyllane-Related Sesquiterpenoids with Anti-Inflammatory Activity from Rumphella antipathes (Linnaeus, 1758)

Two previously undescribed caryophyllane-related sesquiterpenoids, antipacids A (1) and B (2), with a novel bicyclo[5.2.0] core skeleton, and known compound clovane-2β,9α-diol (3), along with rumphellolide L (4), an esterified product of 1 and 3, were isolated from the organic extract of octocoral Rumphella antipathes. Their structures, including the absolute configurations were elucidated by spectroscopic and chemical experiments. In vivo anti-inflammatory activity analysis indicated that antipacid B (2) inhibited the generation of superoxide anions and the release of elastase by human neutrophils, with IC₅₀ values of 11.22 and 23.53 μM, respectively, while rumphellolide L (4) suppressed the release of elastase with an IC₅₀ value of 7.63 μM.     

石灰岩山地4种林分空气细菌动态变化及其影响因素分析

为探索石灰岩山地不同林分类型中空气细菌的动态变化规律及其影响因素,筛选出抑菌效果较好的林分,选取徐州石灰岩山地4种典型林分为试验材料,采用自然沉降法研究林分中细菌含量的季节变化和日变化,同步监测温湿度、风速、PM2.5和空气负离子浓度,分析空气细菌含量及其之间的关系。试验结果表明:(1)细菌含量季节性变化表现为春季秋季夏季冬季,除冬季日变化呈现"早晚低,中午高"的变化趋势,其他季节表现为"早晚高,中午低";(2)不同林分类型空气细菌含量存在显著差异(P0.05),总体来看,苦楝林对细菌的抑制效果最好;(3)细菌含量与空气湿度和PM2.5呈极显著正相关关系,与空气负离子呈极显著的负相关关系。综上,苦楝林的抑菌效果最好,湿度、PM2.5和负离子是影响空气细菌含量的主要因素。本研究可为此地城市保健林的营建以及生态旅游规划提供科学依据。     

彩色多普勒超声对直径3 cm以上肾上腺肿瘤的诊断价值

目的探讨彩色多普勒超声对直径大于3 cm肾上腺肿瘤的诊断价值。方法使用彩色多普勒超声检测43例直径大于3 cm肾上腺肿瘤的患者,分析超声图像特征及相关临床资料。结果 43例患者中超声诊断正确41例,误诊1例,漏诊1例;定位诊断率约95.3%。肿瘤以单侧单发为主,其中恶性转移瘤多来自肺癌,且大部分与原发灶来自同侧。肾上腺肿瘤形态多规则,内部回声多为均匀低回声,少许瘤体呈高回声或混合性回声,大部分肿瘤无明显血流信号。结论超声检查对直径大于3 cm肾上腺肿瘤的诊断及临床分型有重要价值。     

三唑酰草胺在不同类型土壤中的降解特性

为科学评价除草剂三唑酰草胺在土壤环境中的生态风险，采用室内模拟方法，研究了三唑酰草胺在吉林黑土、江西红土和安徽水稻土中的降解特性。结果表明:三唑酰草胺在土壤中的降解符合一级动力学方程。好氧条件下三唑酰草胺在3种土壤中的降解半衰期分别为86.5、106和91.4 d；厌氧条件下半衰期分别为106、130和127 d；水稻田厌氧条件下半衰期分别为162、219和188 d。研究表明，三唑酰草胺在水稻田厌氧条件下的降解速率明显慢于其他2种试验条件下。     

不同吸附特性的稻草生物炭对稻田氨挥发和水稻产量的影响

秸秆生物炭具有改善土壤生态环境、土壤蓄水保肥和减少温室气体排放等正效应,但其石灰效应会加大稻田氨挥发损失。为充分发挥生物炭吸铵特性,降低其石灰效应的不利影响,对不同热解温度(300、500、700℃)和酸化水平(pH值=5、7、9)稻草生物炭处理下的田面水NH_4~+-N浓度、氨挥发和水稻产量进行了研究。结果表明:偏酸性(pH值=5)、中性(p H值=7)生物炭处理在基肥期和分蘖肥期均能显著降低田面水NH_4~+-N峰值浓度(P0.05),降幅达16.90%～35.60%。全生育期稻田氨挥发损失占施氮量的15.14%～26.05%(2019年)、15.10%～19.00%(2020年)。稻田增施热解温度为700℃、酸化水平为5(p H值=5)的生物炭(C700P5)降氨效果最好,两年氨挥发分别显著降低22.93%、12.61%(P0.05)。高温热解配合偏酸性、中性生物炭(C700P5、C700P7)增产效果显著,增产率达9.92%～13.50%,结构方程模型表明,其增产原因是生物炭酸化处理降低了稻草生物炭的石灰效应,而热解温度调整提高了生物炭阳离子交换量(CationExchange Capacity,CEC),进而降低了田面水NH_4~+-N浓度和氨挥发损失,最终提高了水稻地上部氮素积累和水稻产量。研究可揭示不同热解温度和酸化水平制备的生物炭在稻田中的应用潜力,并为稻田合理施用生物炭和减少化肥施用量提供理论依据。     

Optimization of curing process for polymer-matrix composites based on orthogonal experimental method

In this paper, the orthogonal experimental method was carried out to optimize the curing process of aeronautical composite X850/T800 in autoclave process. Four important curing parameters including curing pressure, heating rate, curing temperature and heat preservation time were taken into account, and sixteen samples were fabricated to study the effects of the four parameters mentioned above on the curing quality by interlaminar properties test and microstructure analysis. The interlaminar properties and the interfacial bonding quality of these samples were studied by the short-beam three points bending test and scanning electron microscopy, respectively. Results revealed that the optimal curing process of X850/T800 composite laminate should be as follows: curing pressure of 0.6 MPa, heating rate of 1.5 °C/min, curing temperature of 160 °C, and heat preservation time of 120 min.