菲牛蛭抗凝血活性物质提取方法研究

为对菲牛蛭抗凝血活性物质的提取进行优化,通过采取不同方法对菲牛蛭活体(6种)、干体(6种)及唾液腺分泌物(3种)进行提取得出最适提取方法。结果表明对于菲牛蛭活体和干体均是采取80%预冷丙酮提取得到的抗凝血物质含量高,最高分别达至(61.20±1.13)AT-U/g和(89.19±1.13)AT-U/g;对于菲牛蛭唾液腺分泌物则是采取10%的三氯乙酸提取得到的抗凝血物质含量高,最高达(24.41±0.98)AT-U/g。研究结果得出了适合菲牛蛭活体、干体和唾液腺分泌物中提取抗凝血活性物质的最适方法,有利于推动水蛭素的大规模生产和广泛的临床应用。     

不同熔化速率下的电渣重熔过程数值模拟分析

电渣重熔能提高钢锭的质量,从而满足特种行业的需要,其过程伴随着复杂的物理现象,存在着磁流体流动、传热和传质以及电化学等多方面的影响。通过耦合电磁以及流动和温度方程对电渣重熔过程的三维瞬态进行了数学模拟,研究了熔化速率对重熔过程的影响。结果表明：电流密度、焦耳热和电磁力都随着熔化速率的增大而增大,当熔化速率由14.4 kg/h增加到27.0kg/h,电流密度、焦耳热和电磁力最大值的增大比例超过100%。随着熔化速率的增大,温度最大值有小幅的增加,而且速度最大值的增大幅度接近50%;金属熔池深度则由27 mm增大到38 mm,不利于保证铸坯的质量。     

Temporal-spatial Filtering in the Preprocessing of Clinical EEG Signals

EEG spot-recording for clinical patients in the bed is always advocated due to easing patients and making them comfortable. But EEG signals recorded in the ward exposed to various noisesand interference is less effective in the EEG analysis. Atemporal-spatial filter is designed for noise removing of clinical EEG signals, the first filtering is temporal filtering using band-pass filter, and the second filtering is spatial filtering with ICA-based spatial filter. Experimental results indicate that various noises and interferences, such as power interference, blinking, eyes movements, muscle moments, ECG artifacts, etc., are removed effectively, individually or simultaneously.     

人在环路模拟驾驶仿真实验系统研发

汽车是人机协同控制的复杂系统,基于NI PXIe8108实时控制器、PXI7842R数据采集卡、模拟驾驶输入设备及相关软硬件搭建了驾驶模拟仿真系统;用LabVIEW编程语言建立了车辆动力学模型;用虚拟引擎Unity3D软件开发了视景系统;并通过数据库技术使仿真过程与视景系统相结合,实现仿真过程与三维动画实时视景系统的数据交互。结果表明：通过人在环路模拟驾驶仿真实验,使仿真过程中引入了驾驶模拟操纵,实现了人在环路的人机交互式仿真,得到汽车相关性能仿真结果,为驾驶过程中人和汽车协同控制仿真和极端工况下的仿真,提供了一种安全、可靠的人车协同控制仿真环境。     

Analysis of thermal stress in a water pipe of blast furnace copper stave

To solve the general problem that copper staves experience water pipe failure in blast furnace,the effects of constraints on the thermal stress distribution of copper stave water pipe are investigated by thermal-structural coupling analysis.In this study,a mathematical model of thermal stress of copper stave is established to analyze the thermal deformation and stress distribution of water pipe under subject to different types of constraints.The results show that the thermal stress on the root of water pipe is larger than others as the terminal of water pipe is free or being fixed.But the equivalent stress on the root of water pipe is just 45 MPa as the terminal of water pipe is free,which is lower than the yield strength of pure copper.The equivalent stress on the root of water pipe is about 272 MPa as the terminal of water pipe is being fixed,and exceeds the yield strength of pure copper.The water pipes should be flexible.The maximum equivalent stress is about 600 MPa as the water pipe is subjected to the constraint of shell,which is far beyond the yield strength of pure copper.The maximum displacement is located at the end of water pipe and is about 1.73 mm.Then the diameter of the hole should be 120 mm with taking installation error into consideration.     

Penetration behavior of bath induced by top-blown gas jets for steelmaking converter

The cavity induced by top-blow gas jets impinging on the bath surface is one of most important parameters, which has overwhelming influence on the rate of slag formation and metallurgical performance. Water model experiments are conducted through a 1/10 scaled-down top-blown convertor. Effects of lance height and gas flow rate on penetration behavior are studied, and also the influence mechanism of liquid surface tension on penetration depth is addressed based on the experiments and theory analysis. An energy utilization index (EUI) is defined to reflect how much the impinging kinetic energy of gas jets are transferred into bath for formation of cavity, and an improved model is proposed to predict penetration depth of jets. The results show that penetration depth increases with lowering lance height and increasing gas flow rate, and impact diameter increases with increasing lance height, but is little affected by gas flow rate. Influence of liquid surface tension on penetration depth is enhanced with increasing surface tension and penetration depth. The EUI increases with increasing lance height, and a function relationship of it with lance height is obtained based on the experiments.     

地下热水的来源与补给机制分析——以重庆北温泉为例

地下热水的来源研究对地下热水资源量评价和可持续开发利用有重要意义。选取重庆市北温泉作为研究对象,采用水化学分析、D、O同位素以及实时在线监测对其热水来源进行了研究。研究认为：重庆市北温泉泉水为中-低温浅层中性地热水,水化学类型为SO4-Ca型,地下热水的δ 18O值为-8.48‰～-7.09‰,δD值为-55.46‰～-53.26‰,其补给来源为雨水,补给高程为海拔641～1 206 m的岩溶出露区。安装马歇尔槽和CDTP300高分辨率实时在线监测发现：1)地下热水水文地球化学特征在长时间内稳定,体现了稳定的水-岩作用过程;2)北温泉的流量与研究区降雨量呈现出以半年为单位的滞后,雨季偏低,旱季偏高;当场降雨后20 d左右,温泉水的水温和电导率微降,水量增加。地下热水的来源为大气降水,其补给除了长时间长距离的含水层稳定补给外,热水上升过程中受地表水和浅层地下水的补给。     

Vector form intrinsic finite element analysis based on fine beam model

精细梁不同于Euler梁和Timoshenko梁,该模型在考虑剪切变形的同时还考虑了横向弯曲时截面转动产生的附加轴向位移及横向剪切变形影响截面抗弯刚度后产生的附加横向位移。推导了适用于向量式有限元分析的精细梁单元应变和内力表达式,采用FORTRAN自编了向量式有限元程序。对悬臂梁、两端固支梁和门式框架进行了算例分析,对比了采用不同梁单元模型下结构的竖向位移。结果表明：当高跨比较小时,3种梁单元的竖向位移相差不大;当高跨比较大时,精细梁单元的竖向位移较Euler梁和Timoshenko梁明显增大,表明剪切变形及刚度折减引起的附加轴向位移、附加横向位移不能忽略。精细梁单元模型对高跨比较大的梁进行分析可望得到更精确的结果。