Determinants and correlates of above-ground biomass in a secondary hillside rainforest in Central Vietnam

Despite inception of carbon-conservation forestry programs, information about total above-ground woody biomass (TAGB) in Vietnamese secondary lowland rainforests is still scarce. We elucidated major factors influencing local variation of TAGB within an anthropogenically modified hillside forest in Th?a Thiên-Hu? Province. On forty 400 m² sized plots all tree species were recorded, and their biomass was calculated using allometric equations. In addition, bio-physical parameters relating to terrain and soils were measured. Effects of bio-physical variables on forest TAGB were assessed using multivariate regression methods. Forest TAGB (average 117 Mg ha^?1) was primarily explained by forest structural variables, i.e. tree densities and average heights, in particular presence of large trees. TAGB was largely determined by the biomass of a few species which dominated different forest parts (ridges or hill base); TAGB was hardly influenced by species diversity. Many dominant trees were light-demanding species; these were characterised by scarce rejuvenation and high tree mortality. Bio-physical patterns indicated that previous logging impacts persisted and continued to influence seedling establishment, sapling growth/survival, and—ultimately—species composition. Nutrient patterns were mostly explained by interactions with certain tree species and tree foliage cover, as modulated by terrain and logging impacts. Development trajectories of TAGB over the next 10–20 years could not be predicted easily since (1) many functionally important late-succession species (e.g. dipterocarps) were very scarce; (2) the sizes of initially established light-demanding species appeared to meet limits, including increasing tree mortality; and (3) rejuvenation and species succession differed locally and proceeded along largely unpredictable pathways. Some suggestions for further research are made.     

The potential of hyperspectral images and partial least square regression for predicting total carbon,total nitrogen and their isotope composition in forest litterfall samples

Purpose

The main objective of this study was to examine the potential of using hyperspectral image analysis for prediction of total carbon (TC), total nitrogen (TN) and their isotope composition (δ¹³C and δ¹⁵N) in forest leaf litterfall samples.

Materials and methods

Hyperspectral images were captured from ground litterfall samples of a natural forest in the spectral range of 400–1700 nm. A partial least-square regression model (PLSR) was used to correlate the relative reflectance spectra with TC, TN, δ¹³C and δ¹⁵N in the litterfall samples. The most important wavelengths were selected using β coefficient, and the final models were developed using the most important wavelengths. The models were, then, tested using an external validation set.

Results and discussion

The results showed that the data of TC and δ¹³C could not be fitted to the PLSR model, possibly due to small variations observed in the TC and δ¹³C data. The model, however, was fitted well to TN and δ¹⁵N. The cross-validation R² _cv of the models for TN and δ¹⁵N were 0.74 and 0.67 with the RMSE_cv of 0.53% and 1.07‰, respectively. The external validation R² _ex of the prediction was 0.64 and 0.67, and the RMSE_ex was 0.53% and 1.19 ‰, for TN and δ¹⁵N, respectively. The ratio of performance to deviation (RPD) of the predictions was 1.48 and 1.53, respectively, for TN and δ¹⁵N, showing that the models were reliable for the prediction of TN and δ¹⁵N in new forest leaf litterfall samples.

Conclusions

The PLSR model was not successful in predicting TC and δ¹³C in forest leaf litterfall samples using hyperspectral data. The predictions of TN and δ¹⁵N values in the external litterfall samples were reliable, and PLSR can be used for future prediction.

     

The effect of simulated rat damage on irrigated rice yield and compensation

A field experiment was conducted to investigate the impact of simulated rat damage on grain yield in irrigated lowland rice in An Giang province, in the Mekong Delta of Vietnam. Rat damage was simulated by making a 45° cut at the base of the rice tillers about 3–5 cm above the soil surface. 0% (control), 5%, 10%, 25% and 50% of the tillers were removed at the tillering (25 days after sowing, DAS), panicle initiation (43 DAS), flowering (72 DAS) and ripening (87 DAS) stages. The total number of mature tillers, immature tillers and percent filled grains, the weight of 1000 grains and grain yields were recorded. The rice crop completely compensated by increased tillering and yield for tillers damaged up to 50% at the tillering stage. However, the damage and yield loss were highly variable. The ability of the rice crop to compensate at later stages progressively reduced. The implications for managing rat damage to rice crops are (1) rodent control activities should be applied before 10% of tillers are damaged at the tillering stage, and (2) a well balanced nitrogen supply during the tillering stage could potentially assist the rice plants to better compensate for rat damage.     

Aporphine alkaloids,clerodane diterpenes,and other constituents from Tinospora cordifolia

Phytochemical investigation of the methanol extract of Tinospora cordifolia aerial parts led to the isolation of four new and seven known compounds. The structures of two new aporphine alkaloids, N-formylasimilobine 2-O-β-d-glucopyranosyl-(1 → 2)-β-d-glucopyranoside (tinoscorside A, 1) and N-acetylasimilobine 2-O-β-d-glucopyranosyl-(1 → 2)-β-d-glucopyranoside (tinoscorside B, 2), a new clerodane diterpene, tinoscorside C (3), and a new phenylpropanoid, sinapyl 4-O-β-d-apiofuranosyl-(1 → 6)-O-β-d-glucopyranoside (tinoscorside D, 6) were determined by extensive spectroscopic methods including FTICR-MS and 1D and 2D NMR.     

Clay dispersion and its relation to surface charge in a paddy soil of the Red River Delta,Vietnam

Dispersion is an important issue for clay leaching in soils. In paddy soils of the Red River Delta (RRD), flooding with fresh water and relatively high leaching rates can accelerate dispersion and the translocation of clay. For the clay fraction of the puddled horizon of a typical paddy soil of the RRD, the effect of various cations and anions as well as humic acid (HA) at different pH values on the surface charge (SC) were quantified and the dispersion properties were determined in test tubes and described by the C₅₀ value. In the <2 µm fraction, dominated by illite, the proportion of 2:1 vs. 1:1 clay minerals is 5:1. The organic‐C content of the clay fraction is 2.2%. Surface charge was found to be highly pH‐dependent. At pH 8 values of –32 and at pH 1 of –8 mmol_c kg^–1 were obtained. Complete dispersion was observed at pH > 4, where SC is > –18 mmol_c kg^–1. The flocculation efficiency of Ca strongly depends on the pH. At pH 4, the C₅₀ value is 0.33, 0.66 at pH 5, and 0.90 mmol L^–1 at pH 6. At pH 6, close to realistic conditions of paddy soils, the effect of divalent cations on the SC and flocculation decreases in the order: Pb > Cu > Cd > Fe^II > Zn > Ca > Mn^II > Mg; Fe^II was found to have a slightly stronger effect on flocculation than Ca. An increase in concentrations of Ca, Mn^II, and Mg from 0 to 1 mmol L^–1 resulted in a change in SC from –25 to approx. –15 mmol_c kg^–1. In comparison, the divalent heavy‐metal cations Pb, Cu, Cd, and Zn were found to neutralize the SC more effectively. At a Pb concentration of 1 mmol L^–1, the SC is –2 mmol_c kg^–1. From pH 3 to 5, the dispersion of the clay fraction is facilitated rather by SO than by Cl^–, which can be explained by the higher affinity of SO to the positively charged sites. With an increase of the amount of HA added, the SC continuously shifts to more negative values, and higher concentrations of cations are needed for flocculation. At pH 3, where flocculation is usually observed, the presence of HA at a concentration of 40 mg L^–1 resulted in a dispersion of the clay fraction. While high anion concentrations and the presence of HA counteract flocculation by making the SC more negative, Fe^II and Ca (C₅₀ at pH 6 = 0.8 and 0.9 mmol L^–1, respectively) are the main factors for the flocculation of the clay fraction. For Fe^II and Ca, the most common cations in soil solution, the C₅₀ values were found to be relatively close together at pH 4, 5, and 6, respectively. Depending on the specific mineralogical composition of the clay fraction, SC is a suitable measure for the determination of dispersion properties and for the development of methods to keep clay particles in the soil in the flocculated state.     

Genetic and phytochemical analysis of Indonesian black rice cultivars

Journal of Crop Science and Biotechnology - There are many local black rice cultivars spread throughout Indonesia and are only a few of these which formally describe their genetic diversity and...     

Mapping QTL controlling soybean seed sucrose and oligosaccharides in a single family of soybean nested association mapping (SoyNAM) population

The meal value of Soybean for monogastric animals is determined partly by sucrose, raffinose and stachyose. Of these, sucrose is desirable, while raffinose and stachyose are indigestible, causing flatulence and abdominal discomfort. The objective of this study was to identify quantitative trait loci (QTL) controlling seed sucrose, raffinose, and stachyose in a set of 140 SoyNAM (Nested Association Mapping) recombinant inbred lines (RILs), developed from the cross between lines IA3023 and LD02‐4485. A total of 3,038 SNP markers from the Illumina SoyNAM BeadChip SNP were used to map the QTLs for sucrose and the RFOs, raffinose, and stachyose. Significant genotypic differences (p < .001) among RILs were observed for sucrose, raffinose and stachyose contents across years. A 3038 Illumina SoyNAM BeadChip SNPs identified three QTLs for sucrose, one on chromosome 1, explaining 10% variance and two on chromosome 3 each explaining 22%. Raffinose QTL was detected on chromosome 6, explaining 6% variance. The mapped QTLs were novel and spanned regions harbouring candidate genes with roles in plant growth including seed development.     

Differentiation of Umbilical Cord Lining Membrane-Derived Mesenchymal Stem Cells into Endothelial-Like Cells

Background: Stem cell therapy for the treatment of vascular-related diseases through functional revascularization is one of the most important research areas in tissue engineering. The aim of this study was to investigate the in vitro differentiation of umbilical CL-MSC into endothelial lineage cells. Methods: In this study, isolated cells were characterized for expression of MSC-specific markers and osteogenic and adipogenic differentiation. They were induced to differentiate into endothelial-like cells and then examined for expression of the endothelial-specific markers, karyotype, and functional behavior of cells. Results: Isolated cells expressed MSC-specific markers and differentiated into adipocytes and osteoblasts. After endothelial differentiation, they expressed CD31, vWF, VE-cadherin, VEGFR1, and VEGFR2 at both mRNA and protein level, but their morphological changes were not apparent when compared with those of undifferentiated cells. There were no significant changes in karyotype of differentiated cells. Furthermore, angiogenesis assay and LDL uptake assay showed that differentiated cells were able to form the capillary-like structures and uptake LDL, respectively. Conclusion: The results indicated that umbilical CL-MSC could differentiate into functional endothelial-like cells. Also, they are suitable for basic and clinical studies to cure several vascular-related diseases. Key Words: Endothelial differentiation, Endothelial-like cells, Mesenchymal stem cells, Umbilical cord lining membrane     

Mapping the pork value chain in Vietnam: a systematic review

Tropical Animal Health and Production - In Vietnam, pork is the most commonly consumed type of meat, and the demand is expected to rise even further. Nevertheless, food safety is a major concern,...     

Potato (Solanum spp.) production using apical cuttings and tuberlets under three contrasting environments of Vietnam

Potato production from rooted apical cuttings or from small tubers (l–20g) produced in high density beds has great potential in Asia. This is particularly important in non-traditional warmer environments. This research was conducted to assess the feasibility of producing many small tubers in high density beds. A second objective compared tubers from beds with transplanted rooted cuttings and traditional seed tubers for growth and yield in the field. Tuberlet production in beds exceeded 2000/m² with a density of 1000 plants/m² under optimal growing conditions while under high temperatures only about 1.25 tuberlets/plant were produced. In field experiments, transplanted cuttings yielded 20 t/ha in the mid and high elevation areas, only slightly less than tuberlets of 5–10g while at the hot site, yields were generally only 8 to 10 t/ha for both materials. Larger healthy seed tubers produced significantly higher yields at the low and high elevation sites. Tuberlets of 1–5g were also able to give yields of 20 t/ha in the mid-elevation site. These results indicate that cuttings and small tuberlets are two ways of growing potatoes which need to be further evaluated for socioeconomic assessment by farmers.