基于"量-质-域-流"四维指标体系的水资源荷载状况评价——以黑河流域三地市为例

随着社会经济用水不断增加，水资源供需矛盾加剧，水资源系统出现荷载不均衡现象，制约了区域发展，危及生态环境良性循环。本文从水资源系统的负荷需求和承载能力出发，基于“量、质、域、流”四个维度构建水资源荷载均衡评价指标体系，采用指标规范化的正态云模型，评价2015年黑河流域张掖市、酒泉市、阿拉善盟水资源配置方案的荷载均衡状况，并依据负荷与承载能力评分二维坐标，分出低负荷-高承载能力、低负荷-低承载能力、高负荷-高承载能力和高负荷-低承载能力四个分区。评价结果表明：2015年三地水资源荷载状况均为Ⅳ级，张掖市综合评分为3.697，酒泉市为3.657，阿拉善盟为3.901，三地均处于高负荷-低承载能力区域；三地在水质维度上处于低负荷-高承载能力区间，水质维度评分均处于Ⅱ级，酒泉市水质评分优于张掖市，张掖市水质评分优于阿拉善盟；在水量、水域、水流维度上均处于高负荷-低承载能力区间，水量方面三地处于Ⅳ级，张掖市优于酒泉市，酒泉市优于阿拉善盟；水域方面张掖和阿拉善盟评分均处于Ⅴ级，酒泉评分处于Ⅳ级；水流方面三地均处于Ⅴ级。需要采取调控手段在水量、水域、水流方面上进行“增强承载”和“卸荷”。     

拖拉机室内台架试验技术现状与展望

作为拖拉机研发的重要验证手段，拖拉机室内台架试验可方便高效地为拖拉机模拟各种工况下的性能表现。首先探究动力总成控制技术、负载模拟技术、试验数据处理技术和试验结果评价技术4种拖拉机室内台架试验关键技术，结合试验技术的最新研究进展，对4种技术进行详细的阐述和分析。接着从动力总成控制算法、负载模拟算法、试验数据处理方法、试验结果评价指标体系4个方面对拖拉机室内台架试验技术进行讨论与展望。最后得出对动力总成算法进行优化、提高动态负载模拟精度、保持试验数据处理方法的前沿性、对试验结果综合客观评价是拖拉机室内台架试验技术的发展趋势，以期为我国拖拉机室内台架试验技术的发展提供参考。     

Introduction to the International Symposium on Lipid Science and Health and research progress in lipid science and health

The International Symposium on Lipid Science and Health (ISLSH), which was organized annually by Oil Crops Research Institute of Chinese Academy of Agricultural Sciences (OCRI-CAAS) since 2016, has gained a strong reputation and attracted hundreds of delegates from around the world for discussion of lipid research trends and advances every year, to promote research and academic exchanges in the fields of lipid science and health. The 5th International Symposium on lipid Science and Health was successfully held in Wuhan, China, from October 23rd to 25th, 2020, to celebrate the 60th anniversary of OCRI-CAAS. The two-day symposium gathered well-known experts specialized in lipid science to share the current state of lipid research with emphasis on aspects covering: (1) lipid profiling and characterization, (2) lipid preparation and modification, (3) lipid improvement and regulation, and (4) lipid nutrition and health. The symposium was conducted by a combination of on-site and network meeting. More than 250 distinguished delegates from academia and industry participated in the on-site multidisciplinary meeting, and thousands of scholars attended the virtual event. This paper is as a record of the symposium proceedings and a brief summary of the advances and trends in 4 aspects of lipid science and health.     

汽车变速器齿轮修形仿真分析

汽车变速器的关键部件齿轮因其加工和装配质量的影响,工作时容易引起振动噪声大及承载能力降低等问题,而齿轮修形是解决这些问题的有效方法,且成本较低。针对某款汽车变速器,利用Romax对齿轮进行修形分析。结果表明,修形后减小了齿轮的传动误差和最大接触应力,齿面载荷分布更加合理。有效改善了齿轮的传动性能,增加了齿轮寿命。     

人工神经网络在电力系统短期负荷预测中的应用

根据电力系统短期负荷变化的特性，提出BP模型在实际负荷预测应用中的方法和步骤．对BP网络结构、样本空间、收敛性等作了有针对性的研究．结果表明：多层神经网络应用于电力系统短期负荷预测是可行和有效的．其预报结果比传统的负荷预测方法更准确、经济、效果更好．     

改善E1级胶合板用UF胶粘剂预压性能的研究

利用氧化淀粉在树脂合成后期、API在调胶时加入分别对脲醛树脂进行改性，探讨改性UF对胶合板预压强度的影响。采用正交实验法对比改性后胶合板的预压性能和改性后胶合板的甲醛释放量的变化。结果表明：随着API量的加大，胶合板的预压性能得以提高；而氧化淀粉改性后则随着量的加大，一定范围内胶合板的预压性能得以提高，加入量继续加大后反而下降。     

步进电机扭矩测量试验台系统的设计

专用电机扭矩测量仪器精度高，但价格昂贵，操作复杂，长时间使用会出现误差。步进电机扭矩测量试验台系统采用单相交流电机作负载，使用标准扭矩仪对该系统进行标定来对待测调速电机进行扭矩测量。为此，介绍了一种电机扭矩测量系统的构成与工作原理。该系统以单片机为核心，组成扭矩测量与显示系统，可以较好地实现电机扭矩在线测量，具有较好的经济效益。     

有源负载恒温槽性能分析

本文阐述了有源负载恒温槽的工作原理，推导了描述其静态特性的缩减因数表达式，并对这种恒温槽的性能和应用作出了评价。     

两端不等弯矩作用下薄壁梁柱的弯扭屈曲

本文采用Ｒａｙｌｅｉｇｈ－Ｒｉｔｚ法求解两端不等弯矩作用下单轴对称开口薄壁截面梁柱弯扭屈曲临界荷载，分析中考虑了三种常见的边界条件以及屈曲前变形的影响，将本文弯扭屈由临界荷载理论值与试验值比较，吻合较好。     

Response of Vitis vinifera cv. ‘Tempranillo’ to partial rootzone drying in the field: Water relations, growth, yield and fruit and wine quality

This paper reports the effects of irrigation amount and partial rootzone drying (PRD) on water relations, growth, yield and wine quality of Vitis vinifera cv. ‘Tempranillo’ during two consecutive years in a commercial vineyard with a deep, light-clay soil located in Requena, Valencia, Spain. Partial rootzone drying applied at two amounts (100% and 50% of the estimated crop evapotranspiration), was compared to conventional drip irrigation, and also to rainfed vines. Results showed that the effects of irrigation amount on yield and wine quality were different between years. In 2003 with low yield values (around 6.3 t ha⁻¹) irrigation did neither affect grape production nor wine quality. However, in the following year, with much higher general yield (17 t ha⁻¹), the high irrigation dose increased yield by 30% compared to rainfed vines and it also increased must total soluble solids and wine alcohol content. In both seasons, PRD did not significantly affect physiological parameters, nor growth, yield or fruit and wine quality, when compared to the same amount of water applied by conventional drip irrigation. Overall these results suggest that, under our experimental conditions, it was the irrigation amount rather than the system of application what affected vine performance, indicating the difficulties of successfully employing the PRD type of irrigation with a drip system in heavy and deep soils.