Leptin as a predictor of carcass composition in beef cattle

Our objective was to determine if serum concentrations of leptin could be used to predict carcass composition and merit in feedlot finished cattle. Two different groups of crossbred Bos taurus steers and heifers were managed under feedlot conditions near Miles City, MT. The first group consisted of 88 1/2 Red Angus, 1/4 Charolais, and 1/4 Tarentaise composite gene combination steers (CGC) harvested at the ConAgra processing facility in Greeley, CO. The second group (Lean Beef Project; LB) consisted of 91 F2 steers and heifers born to Limousin, Hereford, or Piedmontese by CGC F1 cows crossed to F1 bulls of similar breed composition and harvested at a local processing facility in Miles City, MT. Blood samples were collected approximately 24 h before harvest (CGC) or approximately 3 d before and at harvest (LB). No differences in serum concentrations of leptin were detected (P > 0.10) between Hereford, Limousin, or Piedmontese F2 calves nor between LB steers and heifers. Positive correlations (P < 0.01) existed between serum leptin and marbling score (r = 0.35 and 0.50), fat depth measured between the 12th and 13th rib (r = 0.34 and 0.46), kidney, pelvic, and heart fat (KPH) (r = 0.42 and 0.46), and quality grade (r = 0.36 and 0.49) in CGC and LB cattle, respectively. Serum leptin was also positively correlated with calculated yield grade for CGC steers (r = 0. 19; P = 0. 10) and LB cattle (r = 0.52; P < 0.01). Longissimus area was not correlated with serum leptin in CGC steers (r = 0.12; P > 0.10). However, a negative correlation existed between longissimus area and serum leptin in the LB cattle (r = -0.45; P < 0.01). Serum concentrations of leptin were significantly associated with carcass composition (marbling, back fat depth, and KPH fat) and quality grade in both groups of cattle studied and may provide an additional indicator of fat content in feedlot cattle.     

Intake,digestibility, performance,and carcass traits of beef cattle of different gender

The performance, intake, feed efficiency, and carcass traits of beef cattle from different gender profile were assessed. Fifteen animals (five steers, five spayed heifers, and five intact heifers) with ±250 kg of initial body weight were randomly assigned in individual pens and fed the same diet for 106 days. At the end of the trial, all the animals were slaughtered and the pH, temperature, and weight of the carcass were recorded. The right side of each carcass was then separated into chuck, shoulder, flank sirloin, and round for evaluation of commercial cuts yield. The left carcass sides were ribbed between the 12th and 13th ribs where the rib eye area and fat thickness measurements were taken. The 9th–11th rib section was removed from the left half carcass and then dissected into muscle, fat, and bones in order to estimate carcass composition. Gender had no effect (P > 0.05) on performance, intake, digestibility of dry matter and all the nutrients evaluated, feed efficiency, and carcass characteristics. It can be concluded that steers and heifers (spayed or not) have the same potential to produce beef. From a productive and welfare standpoint, there is no reason to spay heifers.     

Leather quality of beefalo‐Nellore cattle in different production systems

The aim was to compare the effects of two production systems on performance, carcass traits and physical‐mechanical characteristics of leather from Beefalo‐Nellore steers and heifers and to determine if the response to the production system was similar for both genders. A total of 40 Beefalo‐Nellore cattle, 20 steers and 20 heifers, were evaluated. Animals were divided into two production systems: slaughtered at 15 (intensive system) or 26 (extensive system) months of age. In the intensive system, all animals received a ration containing 600 g/kg corn silage and 400 g/kg concentrate. In the extensive system, animals were kept on a pasture predominantly based on Brachiaria sp. and supplemented with 2 kg/day concentrate. In the intensive system, there was no difference in slaughter weight (470 kg body weight) between steers and heifers but steers in the extensive system had greater slaughter weight than heifers (463 and 428 kg body weight, respectively). Leather weight was higher for animals in the intensive than extensive system but there was no difference in leather weight once excess fat was removed. Leather quality from Beefalo‐Nellore cattle slaughtered at 15 or 26 months of age is similar although carcass yield is higher for cattle slaughtered at a younger age.     

Estimation of beef marbling in the Longissimus muscle with computer image analysis of ultrasonic pictures of the Iliocostalis muscle area

This study investigated an objective method for estimating beef marbling using ultrasonic images of the Iliocostalis muscle and the Lomgissimus muscle area sections. Thirty‐one Japanese Black cattle steers were used in this study. The end of the left side shoulder blade bone was scanned using an ultrasonic device. Ultrasonic images were captured of the Longissimus muscle area and that around the Iliocostalis muscle area. Twenty items were measured in the two images using computer image analysis software. The level of beef marbling was measured according to the Beef Marbling Standard (BMS) for carcass grading, and the percentage of ether‐extractable fat content in the Longissimus muscle (EE). The difference in the gray level between the Iliocostalis muscle and intermuscular fat (X10) was used to estimate the BMS and the EE, which were highly correlated (r² = 67.72% and 61.30%). An equation was developed using four parameters from the two ultrasonic images, which could estimate the BMS (r² = 85.88%). This equation could also estimate the EE (r² = 68.98%). The equations used to estimate beef marbling were based on one to four parameters that included X10. Thus, ultrasonic images of the Iliocostalis muscle area section are important for estimating beef marbling.     

Epistatic effects between pairs of the growth hormone secretagogue receptor 1a,growth hormone,growth hormone receptor,non‐SMC condensin I complex,subunit G and stearoyl‐CoA desaturase genes on carcass,price‐related and fatty acid composition traits in Japanese Black cattle

Growth hormone secretagogue receptor 1a (GHSR1a), growth hormone (GH), growth hormone receptor (GHR), non‐SMC condensin I complex, subunit G (NCAPG) and stearoyl‐CoA desaturase (SCD), are known to play important roles in growth and lipid metabolisms. Single and epistatic effects of the five genes on carcass, price‐related and fatty acid (FA) composition traits were analyzed in a commercial Japanese Black cattle population of Ibaraki Prefecture. A total of 650 steers and 116 heifers for carcass and price‐related traits, and 158 steers for FA composition traits were used in this study. Epistatic effects between pairs of the five genes were found in several traits. Alleles showing strain‐specific differences in the five genes had significant single and epistatic effects in some traits. The data suggest that a TG‐repeat polymorphism of the GHSR1a.5′UTR‐(TG)_n locus plays a central role in gene–gene epistatic interaction of FA composition traits in the adipose tissue of Japanese Black cattle.     

Glucose-6-phosphate dehydrogenase and leptin are related to marbling differences among Limousin and Angus or Japanese Black x Angus steers

This work investigated the metabolic basis for the variability of carcass and i.m. adiposity in cattle. Our hypothesis was that the comparison of extreme breeds for adiposity might allow for the identification of some metabolic pathways determinant for carcass and i.m. adiposity. Thus, 23- to 28-mo-old steers of 3 breeds, 2 with high [Angus or Japanese Black x Angus (J. Black cross)] and 1 with low (Limousin) i.m. and carcass adiposity, were used to measure activities or mRNA levels, or both, of enzymes involved in de novo lipogenesis [acetyl-coA carboxylase, fatty acid synthase (FAS), glucose-6-phosphate dehydrogenase (G6PDH), malic enzyme], circulating triacylglycerol (TAG) uptake (lipoprotein lipase), and fatty acid esterification (glycerol-3-phosphate dehydrogenase), as well as the mRNA level of leptin, an adiposity-related factor. In a first study, enzyme activities were assayed in the s.c. adipose tissue (AT), the oxidative rectus abdominis, and the glycolytic semitendinosus muscles from steers finished for 6 mo. Compared with Angus or J. Black cross, Limousin steers had a 27% less (P = 0.003) rib fat thickness, and 23 and 29% less (P < or = 0.02) FAS and G6PDH activities in s.c. AT. In rectus abdominis and semitendinosus, the 75% less (P < 0.001) TAG content was concomitant with 50% less (P < 0.001) G6PDH activity. In a second study, enzyme activities plus mRNA levels were assayed in an oxido-glycolytic muscle, the longissimus thoracis (LT), in the i.m. AT dissected from LT, and in s.c. AT from the same Limousin steers and from Angus steers finished for 10 mo. Compared with Angus, the 50% less (P < 0.001) rib fat thickness in Limousin contrasted with the 1.1- to 5.8-fold greater (P < or = 0.02) mRNA levels or activities, or both, of acetyl-coA carboxylase, G6PDH, lipoprotein lipase, and glycerol-3-phosphate dehydrogenase in s.c. AT. Conversely, the 90% less (P < 0.001) TAG content in Limousin LT was concomitant to the 79 and 83% less (P < or = 0.002) G6PDH activity and leptin mRNA level. Such differences could arise from a greater number of adipocytes in LT from Angus steers because no difference was found between Limousin and Angus for G6PDH activity and leptin mRNA in i.m. AT. We conclude that FAS and G6PDH in s.c. AT could be involved in differences in carcass adiposity, but this relationship disappeared when the fatness increased strongly. Leptin and G6PDH are related to the expression of marbling whatever the body condition and thus could be relevant indicators of marbling in beef cattle.     

Predicting percentage of retail yield from carcass measurements, the yield grading equation, and closely trimmed, boxed beef weights.

Over the past 3 yr, 100 carcasses (64 steers, 24 bulls, and 12 heifers) were fabricated into closely trimmed (6 mm maximum fat cover), boxed beef and further evaluated for percentage of retail yield at the Iowa State University Meat Laboratory. Hot carcass weight ranged from 235 to 399 kg with a least squares mean (LSM) and standard error across all sex classes of 318 +/- 3 kg. Additionally, fat cover ranged from .30 to 1.78 cm with an average of .91 +/- .05 cm. The LSM for longissimus muscle area (LMA) across all sex classes was 81.6 +/- 1.0 cm2. Bulls had significantly less subcutaneous fat (P less than .01) and greater LMA (P less than .01) than did either steers or heifers. Retail yield from the boxed chuck, expressed as a percentage of cold carcass weight, was 19.2 for bulls and 14.8 for steers. This difference was due primarily to a reduction of intermuscular fat. Similarly, bulls had a greater yield (P less than .01) of the boxed round than did steers. When cattle of differing frame sizes were compared, only percentage of retail yield of the boxed round was significant (P less than .01): large-framed cattle yielded 14.3 +/- .2%, compared with 12.8 +/- .2% for the small-framed cattle. When all possible regression analyses were run, sex class differences accounted for 25.7% of the variation in retail yield. The current USDA retail yield equation accounted for only 37.2% of the variation. Percentage of closely trimmed, boneless round had an R2-value of .57.(ABSTRACT TRUNCATED AT 250 WORDS)     

Estimates of subprimal yields from beef carcasses as affected by USDA grades, subcutaneous fat trim level, and carcass sex class and type.

One hundred beef carcasses were selected to represent the mix of cattle slaughtered across the United States. Selection criteria included breed type (60% British/continental European, 20% Bos indicus, and 20% dairy carcasses), sex class (beef and Bos indicus: 67% steers, 33% heifers; dairy: 100% steers), USDA quality grade (4% Prime, 53% Choice, and 43% Select), USDA yield grade (10% YG 1, 43% YG 2, 40% YG 3, and 7% YG 4), and carcass weight (steers: 272.2 to 385.6 kg, heifers: 226.8 to 340.2 kg). One side of each carcass was fabricated into boneless subprimals and minor cuts following Institutional Meat Purchase Specifications. After fabrication, subprimals were trimmed progressively of fat in .64-cm increments beginning with a maximum of 2.54 cm and ending with .64 cm. Linear regression models were developed for each individual cut, including fabrication byproduct items (bone, fat trim) to estimate the percentage yield of those cuts reported by USDA Market News. Strip loin, top sirloin butt, and gooseneck rounds from heifers tended to have a higher percentage yield at the same USDA yield grade than the same cuts from steers, possibly resulting from increased fat deposition on heifers. Percentage of fat trimmed from dairy steers was 2 to 3% lower than that from other sex-class/carcass types; however, due to increased percentage of bone and less muscle, dairy steers were lower-yielding. Fat trimmed from carcasses ranged from 7.9 to 15.6% as the maximum trim level decreased from 2.54 to .64 cm.     

An evaluation of the USDA standards for feeder cattle frame size and muscle thickness

This study was conducted to determine the live weights at which large-, medium-, and small-framed feeder steers and heifers attain a degree of finish associated with a carcass quality grade of low Choice and to examine the relationship of feeder cattle muscle thickness to carcass yield grade traits. Feeder steers (n = 401) and heifers (n = 463) representing three age classes (calf, yearling, long yearling) were selected randomly at a commercial feedlot to exhibit wide ranges in frame size and muscularity. Individual weights were recorded and a panel of five experienced evaluators scored each animal for frame size, muscle thickness, and flesh condition. The cattle were finished on a high-concentrate finishing diet and harvested at an estimated carcass fat thickness of 10 mm. Final weights and USDA carcass grade data were collected for all cattle. Frame size scores effectively predicted finished weight at a marbling end point of Small(00) for both heifers (r2 = 0.89, SE = 16 kg) and steers (r2 = 0.94, SE = 13 kg). For heifers, the Small/Medium and Medium/ Large frame score intersects corresponded to live weights of 460 kg and 520 kg, respectively. For steers, the Small/Medium and Medium/Large frame score lines corresponded to live weights of 504 kg and 577 kg, respectively. These weights were greater than weights specified in the 1979 USDA grade standards. Evaluations of feeder cattle muscling, based on 1979 USDA Standards, were associated (P < 0.05) with differences in longissimus muscle area but were not related (P = 0.08) to differences in numerical carcass yield grades. An alternative muscle thickness classification scheme, involving the use of four thickness classes, was effective for stratifying feeder cattle according to eventual differences (P = 0.004) in carcass yield grade. Our findings suggest that USDA feeder cattle grade standards developed in 1979 are no longer adequate for describing today's population of feeder cattle.     

Predicting individual feed requirements of cattle fed in groups

A published model designed to predict individual feed required for the observed shrunk BW and ADG of growing cattle when fed in groups was modified and evaluated to improve its accuracy. This model is needed to accurately bill feed and compute cost of gain in marketing programs based on individual animal management. Because of its importance in predicting energy required for growth, a database of 401 steers was used to develop an equation to predict percentage of empty-body fat (EBF) from carcass measurements (12th rib fat thickness, hot carcass weight, USDA quality grade, and longissimus muscle area), which accounted for 61% of the variation in EBF with no bias (P > 0.1). When tested with an independent data set of 951 steers, the equation accounted for 51% of the variation with 1% proportional bias. The large variation in the carcass measurements at a particular EBF observed in this study indicates further improvement is limited by the inability of carcass measurements to account for variation in fat distribution in the various carcass components. Because of its importance in setting the target end point, a database of 1,355 steers and heifers was used to determine the relationship between EBF and USDA quality grade. These data indicate growing and finishing cattle reach Select and low-Choice quality grades at an EBF of 26.15 +/- 0.19 and 28.61 +/- 0.20%, respectively (P < 0.05). A data set of 228 steers from different breeds from two serial slaughter studies indicated 14.26 +/- 1.52 kg of empty BW change are required to increase EBF one percentage unit for cattle fed high-energy diets; this adjustment is needed to adjust final shrunk BW to the target EBF end point. The model to predict DM required with modifications developed in this study was evaluated with data from 365 individually fed cattle and it accounted for 74% of the variation in observed DM consumed with no bias (P > 0.1). When the revised model was applied to a commercial feedlot data set containing 12,105 steers and heifers, the total observed DM consumed was predicted with a bias of less than 1%. The model presented in this study accounts for differences known to affect animal requirements (breed type, BW and ADG, and weight at the target EBF end point) and can be used to fairly allocate feed to individuals fed in a group under commercial feedlot conditions.     

Parent‐of‐origin effects on carcass traits in Japanese Black cattle

Variances caused by the differential expression of paternally and maternally imprinted genes controlling carcass traits in Japanese Black cattle were estimated in this study. Data on marbling score (BMS), carcass weight, rib thickness, rib‐eye area (REA) and subcutaneous fat thickness (SFT) were collected from a total of 13,115 feedlot steers and heifers in a commercial population. A sire–maternal grandsire model was used to analyse the data, and then, imprinting parameters were derived by replacing the genetic effect of the dam with the effect of the maternal grandsire in the imprinting model to calculate the genetic parameter estimates. The proportions of the total genetic variance attributable to imprinted genes ranged from 8.7% (SFT) to 35.2% (BMS). The remarkably large imprinting variance of BMS was mainly contributed by maternally expressed inheritance because the maternal contribution of the trait was much larger than that of the paternal trait. The parent‐of‐origin effect originating from maternal gene expression was also observed for REA. The results suggested the existence of genomic imprinting effects on the traits of the Japanese Black cattle. Hence, the parent‐of‐origin effect should be considered for the genetic evaluation of Japanese Black cattle in breeding programmes.     

Effect of health status on fattening performance in young crossbred polish Holstein‐Friesian × Limousin Bulls and steers

The aim of this study was to determine the effect of disease incidence on selected parameters of cattle fattening performance and carcass quality, and the fatty acid profile of beef. The experimental materials comprised 16 bulls and 16 steers, Polish Holstein‐Friesian × Limousin crossbreeds (including 10 healthy and six treated animals of each category). At 5 weeks of age, bloodless castration was carried out using a rubber elastrator. The calves were fed milk replacer provided in automatic feeding stations. Until 540 days of age, the animals were fattened in an Animal Research Laboratory equipped with the Roughage Intake Control (RIC) system (Insentec, the Netherlands). In comparison with healthy (untreated) bulls and steers, sick (treated) animals had lower average body weight at 180 days of age, by 37 kg (P ≤ 0.05) and lower average final body weight at 540 days of age, by 56 kg (P ≤ 0.05). Sick animals were characterized by lower feed intake and worse feed efficiency (not statistically significant differences). Hot carcass weight reached 318 kg in healthy animals and 258 kg in treated bulls (P ≤ 0.05). In treated steers, the percentage of lean meat and bones in the three‐rib section was higher and the percentage of fat was lower, compared with their healthy counterparts (P ≤ 0.01). There was a category × health status interaction for carcass tissue composition. There were no significant influences of type of sickness on analyzed traits. In comparison with healthy steers, intramuscular fat of Musculus longissimus dorsi (MLD) from treated steers had significantly (P ≤ 0.05) higher concentrations of polyunsaturated fatty acids (n‐6 and n‐3) and a lower content of conjugated linoleic acid.     

Fatty acid profile as affected by fat depot and the sex category of Polish Holstein-Friesian × Limousin fattening cattle fed silage ad libitum

This study was designed to compare the fatty acid profiles of four types of fat depots from bulls, steers, and heifers. All animals were Polish Holstein-Friesian and Limousin crossbreds fattened semi-intensively—silage at libitum and concentrate in the amount corresponding to 30% of their net energy requirements. The fatty acid profile in intramuscular, intermuscular, and external and internal fat was determined. The intramuscular fat of bulls was most abundant in total PUFAs and n-6 PUFAs, and functional fatty acids C 18:2, C 20:4, and C 22:5 in comparison with steers and heifers. Regardless of sex category, intramuscular and external fat were characterized by higher levels of UFAs and a more desirable MUFA/SFA ratio than the remaining fat types. It should also be noted that external fat was more abundant in CLA than other fat types, and that the highest CLA content was found in bull fat, compared with the remaining sex categories of cattle.     

Using live estimates and ultrasound measurements to predict beef carcass cutability

Commercial slaughter steers (n = 329) and heifers (n = 335) were selected to vary in frame size, muscle score, and carcass fat thickness to study the effectiveness of live evaluation and ultrasound as predictors of carcass composition. Three trained personnel evaluated cattle for frame size, muscle score, fat thickness, longissimus muscle area, and USDA quality and yield grade. Live and carcass real-time ultrasound measures for 12th-rib fat thickness and longissimus muscle area were taken on a subset of the cattle. At the time of slaughter, carcass ultrasound measures were taken at "chain speed." After USDA grade data were collected, one side of each carcass was fabricated into boneless primals/subprimals and trimmed to .64 cm of external fat. Simple correlation coefficients showed a moderately high positive relationship between 12th rib fat thickness and fat thickness measures obtained from live estimates (r = .70), live ultrasound (r = .81), and carcass ultrasound (r = .73). The association between estimates of longissimus muscle area and carcass longissimus muscle area were significant (P < .001) and were higher for live evaluation (r = .71) than for the ultrasonic measures (live ultrasound, r = .61; carcass ultrasound, r = .55). Three-variable regression equations, developed from the live ultrasound measures, explained 57% of the variation in percentage yield of boneless subprimals, followed by live estimates (R2 = .49) and carcass ultrasound (R2 = .31). Four-variable equations using frame size, muscle score, and selected fat thickness and weight measures explained from 43% to 66% of the variation for the percentage yield of boneless subprimals trimmed to .64 cm. Live ultrasound and(or) live estimates are viable options for assessing carcass composition before slaughter.     

The effects of implant strategy on finished body weight of beef cattle

We summarized experimental data to quantify the change in final BW due to a particular implant strategy when cattle are adjusted to the same final body composition. The database developed for this study included 13 implant trials involving a total of 13,640 animals (9,052 steers and 4,588 heifers). Fifteen different implant strategies were used among these trials, including no implant (control), single implants, and combinations of implants. Individual carcass data collected at slaughter were used to calculate the adjusted final shrunk BW at 28% empty body fat (AFBW) for each treatment group within a trial, then the implant treatments were grouped into categories according to their effect on weight at 28% empty body fat (four groups for steers and two groups for heifers). All differences in AFBW between categories were significant (P < 0.01), indicating an incremental anabolic implant dose response in AFBW over unimplanted animals. Values for AFBW ranged from 520 kg in unimplanted steers to 564 kg in steers implanted and reimplanted with Revalor-S. For heifers, AFBW ranged from 493 kg in unimplanted heifers to 535 kg in heifers implanted and reimplanted with Revalor-H. After accounting for differences in mean BW and composition of gain, implanted steers and heifers had 4.2 and 3.1% higher apparent diet ME values, respectively. Increasing the anabolic implant dose increases the weight at which animals reach a common body composition. This study indicates that anabolic implant response is due to a combination of a reduced proportion of the DMI required for maintenance, reduced energy content of gain, and efficiency of use of absorbed energy.     

Comparison of the effects explained by variations in the bovine PLAG1 and NCAPG genes on daily body weight gain,linear skeletal measurements and carcass traits in Japanese Black steers from a progeny testing program

The c.1326T>G single nucleotide polymorphism (SNP) in the NCAPG gene, which leads to an amino acid change of Ile442 to Met442, was previously identified as a candidate causative variation for a bovine carcass weight quantitative trait loci (QTL) on chromosome 6, which was associated with linear skeletal measurement gains and daily body weight gain at puberty. Recently, we identified the stature quantitative trait nucleotides (QTNs) in the PLAG1‐CHCHD7 intergenic region as the causative variations for another carcass weight QTL on chromosome 14. This study aimed to compare the effects of the two QTL on growth and carcass traits using 768 Japanese Black steers from a progeny testing program and to determine whether a genetic interaction was present between them. The FJX_250879 SNP representing the stature QTL was associated with linear skeletal measurements and average daily body weight gain at early and late periods during adolescence. A genetic interaction between FJX_250879 and NCAPG c.1326T>G was detected only for body and rump lengths. Both were associated with increased carcass weight and Longissimus muscle area, and NCAPG c.1326T>G was also associated with reduced subcutaneous fat thickness and increased carcass yield estimate. These results will provide useful information to improve carcass weight in Japanese Black cattle.     

Genetic parameters for ultrasound and carcass measures of yield and quality among replacement and slaughter beef cattle.

Real time ultrasound (RTU) measures of longissimus muscle area and fat depth were taken at 12 and 14 mo of age on composite bulls (n = 404) and heifers (n = 514). Carcass longissimus muscle area and fat depth, hot carcass weight, estimated percentage lean yield, marbling score, Warner-Bratzler shear force, and 7-rib dissectable seam fat and lean percentages were measured on steers (n = 235). Additive genetic variances for longissimus muscle area were 76 and 77% larger in bulls at 12 and 14 mo than the corresponding estimates for heifers. Heritability estimates for longissimus muscle area were 0.61 and 0.52 in bulls and 0.49 and 0.47 in heifers at 12 and 14 mo, respectively. The genetic correlations of longissimus muscle area of bulls vs heifers were 0.61 and 0.84 at 12 and 14 mo, respectively. Genetic correlations of longissimus muscle area measured in steer carcasses were 0.71 and 0.67 with the longissimus muscle areas in bulls and heifers at 12 mo and 0.73 and 0.79 at 14 mo. Heritability estimates for fat depth were 0.50 and 0.35 in bulls and 0.44 and 0.49 in heifers at 12 and 14 mo, respectively. The genetic correlation of fat depth in bulls vs heifers at 12 mo was 0.65 and was 0.49 at 14 mo. Genetic correlations of fat depth measured in bulls at 12 and 14 mo with fat depth measured in steers at slaughter were 0.23 and 0.21, and the corresponding correlations of between heifers and steers were 0.66 and 0.86, respectively. Live weights at 12 and 14 mo were genetically equivalent (r(g) = 0.98). Genetic correlations between live weights of bulls and heifers with hot carcass weight of the steers were also high (r(g) > 0.80). Longissimus muscle area measured using RTU was positively correlated with carcass measures of longissimus muscle area, estimated percentage lean yield, and percentage lean in a 7-rib section from steers. Measures of backfat obtained using RTU were positively correlated with fat depth and dissectable seam fat from the 7-rib section of steer carcasses. Genetic correlations between measures of backfat obtained using RTU and marbling were negative but low. These results indicate that longissimus muscle area and backfat may be under sufficiently different genetic control in bulls vs heifers to warrant being treated as separate traits in genetic evaluation models. Further, traits measured using RTU in potential replacement bulls and heifers at 12 and 14 mo of age may be considered different from the corresponding carcass traits of steers.     

Effects of clay on fat necrosis and carcass characteristics in Japanese Black steers

Twenty 10‐month‐old Japanese Black steers were used to evaluate the effects of clay on fat necrosis and carcass characteristics. Ten steers (Clay group) were fed the clay (50 g/day) during 10–30 months of age. The other 10 steers (Control group) were not fed it. There was no significant difference in body weight or average daily gain between the two groups (P > 0.05). The occurrence of fat necrotic mass in the Clay group (30%) was lower (P < 0.05) than that in the Control group (90%) at slaughter. The size of necrotic masses in the Clay group was smaller (P < 0.05) than that in the Control group. There was no significant difference in the marbling score, beef color, Longissimus muscle area or subcutaneous fat thickness between the two groups. These results suggest that the clay prevented the occurrence of fat necrosis and did not affect the carcass characteristics in Japanese Black steers.     

Estimation in vivo of the body and carcass chemical composition of growing lambs by real-time ultrasonography

The relationship between ultrasound measurements and empty body and carcass chemical composition was investigated. A 500-V real-time ultrasound with a 7.5-MHz probe combined with image analysis was used to make in vivo measurements to predict the empty body and carcass chemical composition of 31 female lambs of two genotypes, ranging in BW from 18.2 to 48.9 kg. Eleven ultrasound measurements of s.c. fat, muscle, and tissue depth were taken at four different sites (over the 13th thoracic vertebra, between the 3rd and 4th lumbar vertebrae, at the 3rd sternebra of the sternum, and over the 11th rib, 16 cm from the dorsal midline). The single best predictor of empty body fat quantity and energy value was the s.c. fat depth over the 13th thoracic vertebra (r(2) = 0.904 and 0.912; P <0.01, respectively). Body weight was used with ultrasound measurements in multiple regression equations to establish the best independent variables combination for predicting chemical composition. Results showed that BW and two of the three ultrasound measurements (s.c. fat depth over the 13th thoracic vertebra, between the 3rd and 4th lumbar vertebrae, and tissue depth over the 11th rib, 16 cm from the dorsal midline), explained 94.7 to 98.7% (P < 0.01) of the quantity of water and fat and the energy value variation in the empty body and carcass. Body weight per se was the best predictor of the quantity of protein, accounting for 97.5 and 96.8% (P < 0.01) of the variation observed in the empty body and carcass, respectively. The results of this study suggest that BW and some ultrasound measurements combined with image analysis, particularly subcutaneous fat depth over the 13th thoracic vertebra, allow accurate prediction of empty body and carcass chemical composition in lambs.     

Genetic parameters for carcass traits and their live animal indicators in Simmental cattle

The objective of this study was to estimate parameters required for genetic evaluation of Simmental carcass merit using carcass and live animal data. Carcass weight, fat thickness, longissimus muscle area, and marbling score were available from 5,750 steers and 1,504 heifers sired by Simmental bulls. Additionally, yearling ultrasound measurements of fat thickness, longissimus muscle area, and estimated percentage of intramuscular fat were available on Simmental bulls (n = 3,409) and heifers (n = 1,503). An extended pedigree was used to construct the relationship matrix (n = 23,968) linking bulls and heifers with ultrasound data to steers and heifers with carcass data. All data were obtained from the American Simmental Association. No animal had both ultrasound and carcass data. Using an animal model and treating corresponding ultrasound and carcass traits separately, genetic parameters were estimated using restricted maximum likelihood. Heritability estimates for carcass traits were 0.48 +/- 0.06, 0.35 +/- 0.05, 0.46 +/- 0.05, and 0.54 +/- 0.05 for carcass weight, fat thickness, longissimus muscle area, and marbling score, respectively. Heritability estimates for bull (heifer) ultrasound traits were 0.53 +/- 0.07 (0.69 +/- 0.09), 0.37 +/- 0.06 (0.51 +/- 0.09), and 0.47 +/- 0.06 (0.52 +/- 0.09) for fat thickness, longissimus muscle area, and intramuscular fat percentage, respectively. Heritability of weight at scan was 0.47 +/- 0.05. Using a bivariate weight model including scan weight of bulls and heifers with carcass weight of slaughter animals, a genetic correlation of 0.77 +/- 0.10 was obtained. Models for fat thickness, longissimus muscle area, and marbling score were each trivariate, including ultrasound measurements on yearling bulls and heifers, and corresponding carcass traits of slaughter animals. Genetic correlations of carcass fat thickness with bull and heifer ultrasound fat were 0.79 +/- 0.13 and 0.83 +/- 0.12, respectively. Genetic correlations of carcass longissimus muscle area with bull and heifer ultrasound longissimus muscle area were 0.80 +/- 0.11 and 0.54 +/- 0.12, respectively. Genetic correlations of carcass marbling score with bull and heifer ultrasound intramuscular fat percentage were 0.74 +/- 0.11 and 0.69 +/- 0.13, respectively. These results provide the parameter estimates necessary for genetic evaluation of Simmental carcass merit using both data from steer and heifer carcasses, and their ultrasound indicators on yearling bulls and heifers.