Feeding Solanum glaucophyllum to preparturient multiparous cows prevents postparturient hypocalcemia

Solanum glaucophyllum (SG) contains 1,25‐dihydroxyvitamin D₃ (1,25‐(OH)₂D₃) glycosides. We investigated the effect of SG on hypocalcemia in cows. Serum levels of 1,25‐(OH)₂D₃, total calcium and phosphorus dose‐relatedly increased after feeding with SG, while serum magnesium and chloride levels fell (P < 0.05). We also performed an ethylenediaminetetraacetic acid (EDTA) infusion to induce artificial hypocalcemia. Cows that had been fed 4.0 mg/kg body weight of SG daily for 2 weeks had a higher serum concentration of total calcium at the end of EDTA infusion than those not fed SG (P < 0.05). In a field trial, multiparous cows were assigned to one of four groups: (1) no SG, (2) 1.3 g or (3) 2.6 g of SG daily from 14 days before the estimated calving day until 3 days after calving, or (4) a single feed of 35.75 g SG at 3 days before the estimated calving day. The concentrations of serum total calcium after the calving in each treatment group were (1) 7.4, (2) 7.9, (3) 8.0 and (4) 8.9 mg/dL and higher for (4) than for (1) (P < 0.05). The data suggests that feeding a high dose of SG before the calving may maintain higher concentrations of serum calcium after the calving.     

Comparison of bacterial endotoxin lipopolysaccharide concentrations in the blood,ovarian follicular fluid and uterine fluid: a clinical case of bovine metritis

We investigated the concentration of the bacterial endotoxin lipopolysaccharide (LPS) in the blood, ovarian follicular fluid and uterine fluid of a clinical case of bovine metritis. A 2-year-old lactating Holstein cow exhibited continuous fever >39.5°C for more than 2 weeks after normal calving. The cow produced a fetid, watery, red-brown uterine discharge from the vagina and was diagnosed with metritis. The LPS concentrations in plasma and uterine fluid were 0.94 and 6.34 endotoxin units (EU)/ml, respectively. One of seven follicles showed an extremely high level of LPS (12.40 EU/ml) compared to the other follicles (0.62–0.97 EU/ml). These results might suggest the presence of high concentration of LPS in follicles in cows with postpartum metritis.     

Fatigue of structural plywood under cyclic shear through thickness I: fatigue process and failure criterion based on strain energy

The fatigue behavior of plywood specimens under shear through thickness was examined on the basis of strain energy to obtain common empirical equations for the fatigue process and failure criterion under various loading conditions. Specimens were cut from commercial plywood panels of 9-mm thickness. Loading conditions were set as follows: a square waveform at a loading frequency of 0.5 Hz, a triangular waveform at 0.5 Hz, and a triangular waveform at 5.0 Hz. Peak stress applied was determined to be 0.5, 0.7, and 0.9 of static strength, that is, stress levels of 0.5, 0.7, and 0.9. The stress-strain relationships were measured throughout the fatigue test, and the strain energy was obtained at each loading cycle. Loading conditions apparently affected the relationship between stress level and fatigue life. On the other hand, the relationship between mean strain energy per cycle and fatigue life was found to be independent of loading conditions. Mean strain energy per cycle obtained as the fatigue limit was 5.85 kJ/m³ per cycle. Assuming that the accumulation of strain energy is a fatigue indicator, the fatigue process and failure criterion for the plywood specimens under the three loading conditions were commonly expressed by the relationship between cumulative strain energy and loading cycles.     

Heat budget and statistical analysis of the relationship between stream temperature and riparian forest in the Toikanbetsu River basin, northern Japan

Riparian forests greatly influence aquatic ecosystems by providing shade cover, which controls water temperature and limits primary production. We examined the relationship between forest cover and summer stream temperature in northernmost Japan. Heat budget and statistical analyses were employed and the results were compared. Heat budget analysis revealed that the water temperature would decrease almost linearly from 29°C to 25°C with an increase in forested reaches along a 3.2 km stretch of the river. Multiple regression analysis by the stepwise method chose only open channel length as a variable to explain the variation in maximum stream temperature. A sharp increase in stream temperature was noted when riparian forest cover was removed in short lengths, of up to 1.0km; this increasing trend gradually flattened as the length of open stretch increased. Thus, even small openings in the riparian canopy resulted in drastic rises in summer stream temperature. The maximum summer temperatures estimated by the two methods were coincided, and can therefore be accurately estimated by regression analysis. Retrospective analysis based on the regression equation showed that the maximum summer temperature in 1947 was 6°C lower than at present, and that a sharp increase occurred from 1947 to 1960, a period of rapid expansion of agricultural land development in the watershed.     

Effect of loading frequency on fatigue life and dissipated energy of structural plywood under panel shear load

Wood-based panels are subjected to cyclic panel shear load caused by wind and seismic forces in such an application as the sheathing of bearing walls. The fatigue behavior of structural plywood under panel shear load with two different loading frequencies was examined. Pulsating panel shear load with a triangular waveform and loading frequency of 0.5 or 5 Hz was applied to the plywood specimens. Stress−strain hysteresis loops were measured throughout the fatigue tests. Fatigue life was highly dependent on loading frequency at more than 0.5 stress level. The deterioration of mechanical property and damage accumulation in plywood specimen was observed to be slower at higher loading frequency at more than 0.5 stress level. Analyses based on energy loss suggest that panel shear load with higher loading frequency causes less damage to the plywood specimen during one loading cycle at higher stress level, and that the fatigue damage accumulation causing failure might be dependent on stress level although it seems to be unaffected by loading frequency. Based on these results, a new fatigue failure model for plywood specimen was qualitatively developed by combining Weibull’s weakest link model and Daniels’ fiber bundle model.     

Dielectric relaxation due to heterogeneous structure in moist wood

Dielectric properties in three main directions for hinoki wood (Chamaecyparis obtusa) specimens conditioned at various levels of relative humidity were measured in the frequency range from 20 Hz to 10 MHz over the temperature range from −150°C to 20°C. Three relaxations were observed in the specimens conditioned at high levels of relative humidity. The relaxation in the highest frequency range was ascribed to the motions of adsorbed water molecules. The relaxation in the middle frequency range remained unchanged by the ethanol–benzene extraction of specimens. The relaxation location was independent of measuring directions. The relaxation in the lowest frequency range was not detected in the specimens impregnated with methyl methacrylate (MMA). This result suggested that the relaxation was due to electrode polarization. The Cole-Cole circular arc law applied well to two relaxations recognized in the specimens impregnated with MMA. The relaxation magnitude in the middle frequency range was extremely large, and the distribution of relaxation times was very narrow. These characteristics suggested relaxation of the Maxwell-Wagner type resulting from the interfacial polarization in the heterogeneous structure, which included adsorbed water with large electrical conductivity within the insulating cell walls.     

Nursery‐Box Total Fertilization Technology (NBTF) Application for Increasing Nitrogen Use Efficiency in Chinese Irrigated Riceland: N–Soil Interactions

High N fertilizer and flooding irrigation applied to rice in anthropogenic‐alluvial soil often result in N leaching and low use efficiency of applied fertilizer N from the rice field in Ningxia irrigation region in the upper reaches of the Yellow River. Sound N management practices need to be established to improve N use efficiency while sustaining high grain yield levels and minimize fertilizer N loss to the environment. We investigated the effects of Nursery Box Total Fertilization technology (NBTF) on N leaching at different rice growing stages, N use efficiency and rice yield in 2010 and 2011. The four fertilizer N treatments were 300 kg N ha⁻¹ (CU, Conventional treatment of urea at 300 kg N ha⁻¹), 120 kg N ha⁻¹ (NBTF120, NBTF treatment of controlled‐release N fertilizer at 120 kg N ha⁻¹), 80 kgN ha⁻¹ (NBTF80, NBTF treatment of controlled‐release N fertilizer at 80 kg N ha⁻¹) and no N fertilizer application treatment (CK). The results showed that the NBTF120 treatment increased N use efficiency, maintained crop yields and substantially reduced N losses to the environment. Under the CU treatment, the rice yield was 9634 and 7098 kg ha⁻¹, the N use efficiency was 31·6% and 34·8% and the leaching losses of TN were 44·51 and 39·89 kg ha⁻¹; NH₄⁺‐N was 5·26 and 5·49 kg ha⁻¹, and NO₃⁻‐N was 27·94 and 26·22 kg ha⁻¹ during the rice whole growing period in 2010 and 2011, respectively. Compared with CU, NBTF120 significantly increased the N use efficiency and decreased the N losses from the paddy field. Under NBTF120, the N use efficiency was 56·3% and 51·4%, which was 24·7% and 16·6% higher than that of CU, and the conventional fertilizer application rate could be reduced by 60% without lowering the rice yield while decreasing the leaching losses of TN by 16·27 and 14·36 kg ha⁻¹, NH₄⁺‐N by 0·90 and 1·84 kg ha⁻¹, NO₃⁻‐N by 110·6 and 10·14 kg ha⁻¹ in 2010 and 2011, respectively. Our results indicate that the CU treatment resulted in relatively high N leaching losses, and that alternative practice of NBTF which synchronized fertilizer application with crop demand substantially reduced these losses. We therefore suggest the NBTF120 be a fertilizer application alternative which leads to high food production but low environmental impact. Copyright © 2014 John Wiley & Sons, Ltd.     

Analysis of strigolactones,germination stimulants for striga and orobanche,by high-performance liquid chromatography/tandem mass spectrometry

A simple and rapid analytical method for strigolactones, germination stimulants for the root parasitic weeds witchweed (Striga spp.) and broomrape (Orobanche spp.), has been developed using high-performance liquid chromatography connected to tandem mass spectrometry (LC/MS/MS). The natural strigolactones (strigol, sorgolactone, orobanchol, and alectrol) were clearly separated and identified by LC/MS/MS. As low as 0.1 pg/microL of strigol and 0.5 pg/microL of sorgolactone could be quantified, whereas 1 pg/microL was needed for the quantification of orobanchol (S/N > 10). Using this method, it was found that red clover produces orobanchol and alectrol but not strigol. The roots of red clover seedlings were found to produce 13, 70, 58, and 65 pg of orobanchol/plant 1, 2, 3, and 4 weeks after germination, respectively.     

Improvement of functional properties of egg white protein through phosphorylation by dry-heating in the presence of pyrophosphate

Egg white protein (EWP) was phosphorylated by dry-heating in the presence of pyrophosphate at pH 3.0-7.0 and 85 degrees C for 1 and 5 days, and the functional properties of the phosphorylated EWP (PP-EWP) were investigated. The phosphorylation was accelerated with a decrease of pH from 7.0 to 3.0 and for heating times from 1 to 5 days. The phosphorus content of EWP increased approximately 1.05% by dry-heating at pH 4.0 and 85 degrees C for 5 days in the presence of pyrophosphate, which was higher than that of casein. The electrophoretic mobility of EWP increased with an increase in the phosphorylation level. The surface hydrophobicity of EWP increased by phosphorylation. The heat stability, emulsifying properties, and digestibility of EWP were improved by phosphorylation. The calcium phosphate-solubilizing ability of EWP was enhanced by phosphorylation. A firmer and transparent heat-induced gel of PP-EWP was obtained, and the water-holding capacity of heat-induced PP-EWP gel was higher that that of the control. These results suggest that phosphorylation by dry-heating in the presence of pyrophosphate is a useful method for improving the functional properties of EWP.