Quantitative trait loci mapping of forage stover quality traits in six mapping populations derived from European elite maize germplasm

Four forage maize stover quality traits were analysed including in vitro digestibility of organic matter (IVDOM), neutral detergent fibre (NDF), water‐soluble carbohydrates (WSC) and digestibility of NDF (DNDF). We mapped quantitative trait loci (QTL) in three DH (doubled haploid) populations (totally 250–720 DH lines): one RIL population (358 lines) and two testcross (TC) populations, based on field phenotyping at multiple locations and years for each. High phenotypic and genotypic correlations were found for all traits and significant (p < .01) at two locations, and NDF was negatively correlated with the other traits. QTL analyses were conducted by composite interval mapping. A total of 33, 23, 32 and 25 QTL were identified for IVDOM, NDF, WSC and DNDF, respectively, with three, four, five and two major QTL for each. Few consistent QTL for IVDOM, WSC and DNDF were detected in more than two populations. This study contributed to the identification of key QTL associated with forage maize digestibility traits and is beneficial for marker‐assisted breeding and fine mapping of candidate genes associated with forage maize quality.     

Silage yield and quality traits in elite maize hybrids and their relationship to elemental concentrations in juvenile plants

European silage maize is cultivated for animal feed and biogas production. We evaluated 210 factorial crosses of elite dent and flint lines in multilocation trials for agronomic and quality traits together with biomass and shoot concentrations of 10 elements in juvenile plants. Significant genotypic variances, mainly due to general combining ability variance of the dent lines, and high heritabilities were observed for dry matter yield (DMY) and quality traits. DMY was not correlated with quality traits, but methane fermentation yield (MFY) and metabolizable energy content (MEC) showed significant correlations with starch and fibre content. Concentrations of elements N,P,S,K were positively correlated with each other but only in few cases correlated with DMY and quality traits. Parent lines with contrasting P concentrations differed in root morphology traits. Results support DMY as primary trait for selection of silage maize hybrids, but MFY is of negligible importance in breeding for biogas contrary to MEC for animal feed. Neither biomass nor elemental composition of juvenile plants were of predictive value for final DMY or quality traits.     

Genetic studies of seed longevity in hexaploid wheat using segregation and association mapping approaches

Xieyou9308 is the first commercial super hybrid rice released in 1996 in China. To clarify its genetic mechanism underlying high yield potential, a recombinant inbred line (RIL) population derived from the cross between the maintainer line XieqingzaoB (XQZB) and the restorer line Zhonghui9308 (ZH9308) and two derived backcross F₁ (BCF₁) populations were developed for the identification of quantitative trait loci (QTLs) related to ten important agronomic traits (tiller number (TN), heading date (HD), and grain yield per plant (GYPP), etc.). The BCF₁ performance was closely correlated with the performance of their parental RILs according to both the analysis of broad-sense heritability (h _B ²) and phenotypic correlation coefficient (PCC) in the two BCF₁ populations, but not proved by QTL analysis. A total of 21 additive-effect main QTLs (M-QTLs), 22 dominant-effect M-QTLs, and 19 dominant-effect M-QTLs were detected with the WinQTLCart 2.50 software for the ten traits in the RIL and two BCF₁ populations, respectively. Of theses, three QTLs (qHD7a, qPPP3a, and qPL10) of 21 were detected repeatedly in the RIL and one BCF₁ populations, ten QTLs underlying four traits were only detected repeatedly in two BCF₁ populations, and nine QTLs controlling more than two traits were detected repeatedly, the additive-effect QTLs and dominant-effect QTLs play an important role in the performance of agronomic traits and no epistatic QTL of additive by additive effect and dominant by dominant-effect was detected for all traits in three populations. This research is valuable for M-QTL related to important agronomic trait in future fine mapping and positional cloning.     

Molecular mapping of quantitative trait loci for plant growth, yield and yield related traits across three diverse locations in a doubled haploid rice population

A doubled haploid (DH) population of 125lines derived from IR64 × Azucena, an indica – japonica cross were grown in three different locations in India during the wet season of 1995. The parents of mapping population had diverse phenotypic values for the eleven traits observed. The DH lines exhibited considerable amount of variation for all the traits. Transgressive segregants were observed. Interval analysis with threshold LOD > 3.00 detected a total of thirty four quantitative trait loci (QTL) for eleven traits across three locations. The maximum number of twenty QTL were detected at Punjab location of North India. A total of seven QTL were identified for panicle length followed by six QTL for plant height. Eight QTL were identified on three chromosomes which were common across locations. A maximum of seven QTL were identified for panicle length with the peak LOD score of 6.01 and variance of 26.80%. The major QTL for plant height was located on Chromosome 1 with peak LOD score of 16.06 flanked by RZ730-RZ801 markers. Plant height had the maximum number of common QTL across environment at the same marker interval. One QTL was identified for grain yield per plant and four QTL for thousand grain weight. Clustering of QTL for different traits at the same marker intervals was observed for plant height, panicle exsertion, panicle number, panicle length and biomass production. This suggests that pleiotropism and or tight linkage of different traits could be the plausible reason for the congruence of several QTL. Common QTL identified across locations and environment provide an excellent opportunity for selecting stable chromosomal regions contributing to yield and yield components to develop QTL introgressed lines that can be deployed in rice breeding program. This revised version was published online in July 2006 with corrections to the Cover Date.     

Quantitative trait loci mapping and epistatic analysis for grain yield and yield components using molecular markers with an elite maize hybrid

Summary The aim of this investigation was to map quantitative trait loci (QTL) associated with grain yield and yield components in maize and to analyze the role of epistasis in controlling these traits. An F_2:3 population from an elite hybrid (Zong3 × 87-1) was used to evaluate grain yield and yield components in two locations (Wuhan and Xiangfan, China) using a randomized complete-block design. The mapping population included 266 F_2:3 family lines. A genetic linkage map containing 150 simple sequence repeats and 24 restriction fragment length polymorphism markers was constructed, spanning a total of 2531.6 cM with an average interval of 14.5 cM. A logarithm-of-odds threshold of 2.8 was used as the criterion to confirm the presence of one QTL after 1000 permutations. Twenty-nine QTL were detected for four yield traits, with 11 of them detected simultaneously in both locations. Single QTL contribution to phenotypic variations ranged from 3.7% to 16.8%. Additive, partial dominance, dominance, and overdominance effects were all identified for investigated traits. A greater proportion of overdominance effects was always observed for traits that exhibited higher levels of heterosis. At the P ≤ 0.005 level with 1000 random permutations, 175 and 315 significant digenic interactions were detected in two locations for four yield traits using all possible locus pairs of molecular markers. Twenty-four significant digenic interactions were simultaneously detected for four yield traits at both locations. All three possible digenic interaction types were observed for investigated traits. Each of the interactions accounted for only a small proportion of the phenotypic variation, with an average of 4.0% for single interaction. Most interactions (74.9%) occurred among marker loci, in which significant effects were not detected by single-locus analysis. Some QTL (52.2%) detected by single-locus analysis were involved in epistatic interactions. These results demonstrate that digenic interactions at the two-locus level might play an important role in the genetic basis of maize heterosis.     

Comparison of QTLs mapped in RILs and their test-cross progenies of tropical maize for insect resistance and agronomic traits

Quantitative trait loci (QTL) affecting resistance to south-western corn borer Diatraea grandiosella (SWCB) and sugarcane borer Diatraea saccharalis (SCB) have been identified previously in F_2:3 lines and recombinant inbred lines (RILs) of tropical maize using restriction fragment length polymorphism (RFLP) analyses. Our objective was to determine whether QTLs identified in these generations are also expressed in test crosses (TC) of RILs. A population of 166 TC progenies was developed by crossing RILs from the cross CML131 (susceptible) × CML67 (resistant) with the unrelated, susceptible tester line CML216. Resistance to first-generation SWCB, measured as leaf-feeding damage (LFD) under artificial infestation, and other agronomic traits were evaluated in two environments for the TC progenies and three environments for 183 RILs. The correlation between line per se and TC performance was low for LFD and intermediate for most agronomic traits. Estimates of the genotypic variance and heritabilities were smaller in the TC progenies than in the RILs for all traits. Quantitative trait loci were identified using an RFLP linkage map with 136 loci. For LFD, four QTLs were detected in the TC progenies, of which two were in common with nine QTLs previously mapped in the RILs. Few QTLs for agronomic traits were common to the two types of progeny, because of the low consistency of QTL positions for all traits in RIL and TC progenies, the use of TC progenies should be considered in QTL mapping studies as the first step for marker-assisted selection in hybrid breeding.     

基于多重相关RIL群体的玉米株高和穗位高QTL定位

株高和穗位高是玉米育种中的重要农艺性状。本研究利用我国玉米育种中骨干亲本黄早四与来自不同杂种优势群的其他11个骨干自交系组配11个RIL群体,开展基于单环境、联合环境的QTL分析,分别检测到269个和176个QTL。通过区段整合,检测到21个株高主效QTL及15个穗位高主效QTL,这些QTL分布在第1、第2、第3、第6、第7、第8、第9、第10染色体上。相对于共同亲本黄早四而言,部分QTL在不同RIL群体中的效应方向一致,来自共同亲本黄早四的等位基因在不同群体中能够稳定地表达。同时,还分别定位到在多环境下稳定表达的5个株高、4个穗位高“环境钝感QTL”。此外,进一步鉴定出5个重要的株高和穗位高QTL富集区段(bin 1.01-1.02,1.08-1.11,3.05,8.03-8.05和9.07),这些区段均包含多个株高和穗位高相关QTL,如bin3.05位点包含7个QTL,bin8.03-8.05位点分别包含9个QTL,且这些QTL至少在3个不同环境中能够被检测到,这些区域对QTL的精细定位和克隆有重要参考价值。     

Genetic variation among European maize inbreds for resistance to the European corn borer and relation to agronomic traits

The univoltine European corn borer (ECB) has become a major limiting factor for maize (Zea mays L.) production in central Europe. The objective of this study was to survey the genetic variation for ECB resistance in European elite maize germplasm. Eighteen flint and 23 dent inbreds were screened under artificial ECB infestation at two locations in 1993 and 1994. Resistance was assessed by damage rating of broken plants, measurement of tunnel length in dissected stalks, and yield reduction in infested plots relative to insecticide-protected control plots. Flint lines showed significantly greater means for damage rating than dent lines with grain yield reduction of 35% and 24%, respectively. Significant genotypic variances among lines and high heritabilities were found for agronomic traits and damage rating. Heritabilities were intermediate for tunnel length and relative grain yield. Significant associations of days to silking, ear dry matter content, and dry matter yield of the whole plant with damage rating and tunnel length suggested a better resistance in late-maturing, high-yielding inbreds. Genotypic correlations of relative grain yield with tunnel length and damage rating ranged between ?0.46 and ?0.72. Partial correlations, eliminating the effect of flowering time, confirmed these associations. Damage rating of stalks is the most suitable trait for evaluation of ECB damage owing to its high heritability and easy recording. Tunnel length below the primary ear is a useful trait for assessing antibiosis because it is not correlated with days to silking. Inbreds with extreme resistance and susceptibility were identified which can be used as parents for establishing breeding and QTL mapping populations.     

Identifying quantitative trait loci for the general combining ability of yield-relevant traits in maize

Maize is the most important staple crop worldwide. Many of its agronomic traits present with a high level of heterosis. Combining ability was proposed to exploit the rule of heterosis, and general combining ability (GCA) is a crucial measure of parental performance. In this study, a recombinant inbred line population was used to construct testcross populations by crossing with four testers based on North Carolina design II. Six yield-relevant traits were investigated as phenotypic data. GCA effects were estimated for three scenarios based on the heterotic group and the number of tester lines. These estimates were then used to identify quantitative trait loci (QTL) and dissect genetic basis of GCA. A higher heritability of GCA was obtained for each trait. Thus, testing in early generation of breeding may effectively select candidate lines with relatively superior GCA performance. The GCA QTL detected in each scenario was slightly different according to the linkage mapping. Most of the GCA-relevant loci were simultaneously detected in all three datasets. Therefore, the genetic basis of GCA was nearly constant although discrepant inbred lines were appointed as testers. In addition, favorable alleles corresponding to GCA could be pyramided via marker-assisted selection and made available for maize hybrid breeding.     

QTL mapping of improving forage maize starch degradability in European elite maize germplasm

Improving maize starch content is of great importance for both forage and grain yield. In this study, 13 starch degradability traits were analysed including percentage of the seedling area, floury endosperm, hard endosperm of total grain area, percentage of the floury endosperm surface and vitreousness ratio surface hard: floury endosperm surface, etc. We mapped quantitative trait loci (QTL) in a biparental population of 309 doubled haploid lines based on field phenotyping at two locations. A genetic linkage map was constructed using 168 SSR (simple sequence repeat) markers, which covered 1508 cM of the maize genome, with an average distance of 9.0 cM. Close phenotypic and genotypic correlations were found for all traits, and were all statistically significant (p = 0.01) at two locations. Major QTL for more than two traits were detected, especially in two regions in bins 4.05–4.06 and 7.04–7.05, associated with 13 and 9 traits, respectively. This study contributes to marker‐assisted breeding and also to fine mapping candidate genes associated with maize starch degradability.     

作物QTL分析的原理与方法

作物的许多性状为数量性状,数量性状基因座（QTL）定位的理论依据是Morgan的连锁遗传规律;定位的群体有初级作图群体、次级作图群体和高级作图群体;分析的方法有零区间作图法、单区间作图法、复合区间作图法、混合线性模型;影响QTL定位精确性的因素有群体的大小、分析方法、QTL的分布及作用模式等。传统的作图群体和作图方法存在一些问题,因此有必要开发新的作图群体、研制新的作图方法,以缩短QTL分析与育种实际应用之间的距离。     

QTL mapping of bio-energy related traits in Sorghum

Plant height (PHT), stem and leaf fresh weight (SLFW), juice weight (JW) and sugar content of stem (Brix) are important traits for biofuel production in sweet Sorghum. QTL analysis of PHT, SLFW, JW and Brix was conducted with composite interval mapping using F₂ and F_2:3 populations derived from the cross between grain Sorghum (Shihong137) × sweet Sorghum (L-Tian). Three QTLs controlling PHT were mapped on SBI-01, SBI-07 and SBI-09 under four different environments. These QTLs could explain 10.16 to 45.29% of the phenotypic variance. Two major effect QTLs on SBI-07 and SBI-09 were consistently detected under four environments. Eight QTLs controlling SLFW were mapped across three environments and accounted for 5.49–25.36% of the phenotypic variance. One major QTL on SBI-09 located between marker Sb5-206 and SbAGE03 was observed under three environments. Four QTLs controlling Brix were identified under two environments and accounted for 11.03–17.65% of the phenotypic variance. Six QTLs controlling JW were detected under two environments, and explained 6.63–23.56% of the phenotypic variance. QTLs for JW on SBI-07 and SBI-09 were consistent in two environments showing higher environmental stability. In addition, two chromosome regions on SBI-07 and SBI-09 were identified in our study having major effect on PHT, SFLW and JW. The results would be useful for the genetic improvement of sweet Sorghum to be used for biofuel production.     

QTL mapping of nutrient components in maize kernels under low nitrogen conditions

A set of 213 F_2:3 families were used to investigate the effects of nitrogen (N) on grain yield and the concentrations of three nutrient components in maize (Zea mays L.) kernels. A genetic linkage map was constructed using 189 SSR (simple sequence repeat) markers, spanning a total of 2003 cM, including 11 linkages, and the families were evaluated under high N and low N conditions at two farm locations. The results indicate that low N conditions may induce an increase in starch concentration, but a decrease in protein levels. Twenty‐six quantitative trait loci (QTL) were detected for four measured traits in the two N treatments at both locations, including eight QTL for grain yield, seven QTL for oil content, six QTL for protein content and five QTL for starch content. The total number of QTL detected for the four measured traits under high N levels was greater than the QTL detected under low N conditions, and several QTL were identified that specifically expressed under different N conditions. These particular QTL could help provide greater understanding of the genetic basis of N‐usage efficiency.     

Quantitative trait loci for agronomic traits in soybean

There continues to be improvement in seed yields of soybean by conventional breeding, but molecular techniques may provide faster genetic gains. The objective of this study was to identify quantitative trait loci (QTL) associated with the agronomic traits seed yield, lodging, plant height, seed filling period and plant maturity in soybean. To achieve this objective, 101 F₆‐derived recombinant inbred lines (RIL) from a population developed from a cross of N87‐984‐16 × TN93‐99 were used. Experiments were conducted in six environments during 2002–2003. Heritability estimates on an entry mean basis from data combined across environments ranged from 0.12 to 0.65 for seed yield and seed filling period, respectively. Composite interval mapping detected one QTL for yield (near Satt076), two for lodging (near Satt225 and Satt593) and four for maturity (near Satt263, Satt292, Satt293 and Satt591) in this population. Additional environmentally sensitive QTL for these traits, and for seed filling period and plant height are also reported. The QTL associated with agronomic traits that we report and the recently released germplasm (PI 636460) from this population may be useful in soybean breeding programmes.     

Molecular and comparative mapping for heading date and plant height in oat

Selection of oat genotypes combining earliness and short plant height could stimulate oat cultivation worldwide. However, the mechanisms involved with the genetic control of heading date and plant height traits are not fully understood to date. This study aimed to identify genomic regions controlling heading date and plant height in two hulled by naked oat populations and to compare these genomic regions with that of other grass species. Recombinant inbred lines of each population and their parents were genotyped by a 6 K BeadChip Illumina Infinium array and assessed for heading date and plant height in two sowing dates. The quantitative trait loci (QTL) affecting these traits were detected by simple interval mapping. The two oat populations showed different genetic mechanisms controlling heading date. A major QTL was identified in one of the populations, mapped into the ‘Mrg33’ consensus linkage group from the current oat map. Two other QTL were detected into the ‘Mrg02’ and ‘Mrg24’ groups, in the second population. On the other hand, both populations presented the same genomic region controlling plant height. Six SNP markers, mapping on the same linkage group within each population, were associated with the trait, regardless the sowing date, explaining more than 20% of the phenotypic variation. Five of these six markers were mapped into three different linkage groups on the oat consensus map. Genomic regions associated with heading date and plant height in oat seem to be conserved in Oryza sativa L. and Brachypodium distachyon. Our results provide valuable information for marker-assisted selection in oats, allowing selection for earliness and plant height on early segregating generations.     

越冬栽培稻产量性状相关QTL定位

越冬栽培稻是一类能越过自然冷冬季节并在第2年春季萌芽、正常开花结实、收获稻谷的水稻品种。本文通过对越冬栽培稻产量性状QTL分析,明确产量相关性状的遗传规律,旨在进一步解析越冬栽培稻产量性状的遗传机制,为育种创新利用提供理论依据。以3份越冬栽培稻构建的3个半同胞F2群体为材料。各考察15个产量相关性状,利用Excel 2003、GraphPad Prism 5.0和QTL IciMapping 4.10软件分析数据、绘制遗传图谱、定位QTL和联合分析。结果表明,产量性状表型值在3群体中呈连续正态分布,表现为数量性状遗传。共检测到37个QTL和26对上位性QTL,贡献率分别介于2.32%～36.31%和1.04%～2.05%;检测到9个同时影响2个及以上产量性状(一因多效)QTL标记区间;以联合分析检测到13个产量性状相关QTL,其中4个QTL区间与单群体检测QTL区间重叠;越冬栽培稻产量相关性状QTL以加–显性效应遗传为主、上位性遗传效应为辅。本研究将为越冬栽培稻产量相关基因挖掘及育种创新利用奠定基础。     

利用品质性状的回交选择导入系挖掘水稻抗纹枯病QTL

将优质、抗纹枯病的高秆供体Tarom Molaii和Binam导入半矮秆IR64和特青背景,培育品质性状回交选择构建的4个导入系群体IR64/Tarom Molaii、特青/Tarom Molaii、IR64/Binam和特青/Binam,定位了影响水稻抗纹枯病病级(disease scale, DS)、相对病斑高度(relative lesion height, RH)和株高(plant height, PH)的QTL。结果表明,4个导入系群体的DS与RH高度相关,两者与PH呈显著负相关。导入系后代各性状均呈现超亲分离,出现抗性明显优于双亲的抗病个体,其中40%左右属半矮秆抗病类型。采用单向方差分析,在这4个群体中分别定位到10、8、8和6个影响3个性状的QTL,多数基因座上降低DS和RH即增强抗病性同时增加株高的等位基因均来自两个供体。未在同一供体两个不同背景下检测到影响3个性状的相同QTL,表明抗纹枯病QTL表达有明显的遗传背景效应。PH与DS及PH与RH被定位在同一个显著标记位点的QTL数分别占两个性状QTL总数的38%和52%,表明水稻纹枯病抗性与株高关系密切,两者存在许多连锁位点。与以往相同群体品质性状QTL的定位结果相比,发现品质性状QTL与抗纹枯病QTL大多分布在染色体的不同区域,彼此独立遗传。对利用目标性状选择导入系定位非目标性状QTL的效果、影响因素及育种应用进行了探讨,强调了目标性状选择导入系对非目标性状QTL发掘及育种应用的重要性。     

Identification of QTL for stalk sugar-related traits in a population of recombinant inbred lines of maize

Increasing sugar content in silage maize stalk improves its forage quality and palatability. The genetic mapping and characterization of quantitative trait loci (QTLs) is considered a valuable tool for trait enhancement, yet little information on QTL for stalk sugar content in maize has been reported. To this end, we investigated QTLs associated with stalk sugar traits including Brix, plant height (PHT), three ear leaves area (TELA), and days to silking (DTS) in two environments using a population of 202 recombinant inbred lines from a cross between YXD053, which has a high stalk sugar content, and Y6-1, which has a low stalk sugar content. A genetic map with 180 SSR and 10 AFLP markers was constructed, which spanned 1,648.6 cM of the maize genome with an average marker distance of 8.68 cM, and QTLs were detected using composite interval mapping. Seven QTLs controlling Brix were mapped on chromosomes 1, 2, 6 and 9 in the combined environments. These QTLs could explain 2.69–13.08 % of the phenotypic variance. One major QTL for Brix on chromosome 2 located between the markers bnlg1909 and umc1635 explained 13.08 % of the phenotypic variance. Y6-1 also contributed QTL allele for increased Brix on chromosome 6. One major QTLs controlling PHT on chromosome 1 and TELA on chromosome 4 were also identified and accounted for 13.68 and 12.49 % of the phenotypic variance, respectively. QTL alleles for increased DTS were located on chromosomes 1 and 5 of YXD053. Significant epistatic effects were identified in four traits, but no significant QTL × environment interactions were observed. The information presented here may be valuable for stalk sugar content improvement via marker-assisted selection in silage maize breeding programs.     

Location and transmission of QTL for multiple traits in the pedigree of soybean cultivars

In silico mapping for single trait was extended to analyze many agronomic traits in the pedigree of soybean. 26 agronomic traits were measured and 477 polymorphic markers chosen on public genetic map were genotyped on 14 inbreeding lines in the pedigree of Suinong14. We firstly determined 6 principal components from 26 agronomic traits using the principal component analysis and then constructed 6 “super traits” by the multiplication of the vector of the standardized original traits by the eigenvectors corresponding to the principle components. With in silico mapping, a total of 24 markers distributing on 13 linkage groups were detected separately as QTL responsible for 6 “super traits” and of which 14 QTL performed pleiotrpy. Tracing the transmission of functional genes in the pedigree, it was found that some genes were capable to explain the genetic mechanism for the contribution of exotic germplasms and domestic founders to soybean cultivars in the improvement of the performance and quality.     

Identifying QTL for fiber quality traits with three upland cotton (Gossypium hirsutum L.) populations

Cotton fiber quality was quantitative trait, controlled by multiple genes. Identification of stable quantitative trait loci (QTL) effectively contributing to favorable fiber quality traits would provide the key basis for marker-assisted selection used in molecular breeding projects. Three upland cotton F₂ populations were established with a common parent Chinese cultivar Yumian 1 and three American commercial cultivars/lines (Acala Maxxa, CA3084 and TAM94L-25), each of which had unique fiber quality characteristic that was favorable economically. Three whole genome genetic maps were constructed with 323, 302 and 262 SSR loci for population (Yumian 1 × Acala Maxxa), (Yumian 1 × CA3084), and (Yumian 1 × TAM 94L-25) respectively, spanning 1,617.2, 1,639.9 and 1,441.4 cM. Based on these genetic maps and three generation phenotypic data of fiber quality traits (F₂, F_2:3 and F_2:4), 77 QTL were detected, including 19 for fiber length, 14 for fiber uniformity, 17 for micronaire, 10 for fiber elongation, and 17 for fiber strength. Among these QTL, 46 QTL were significant QTL and 31 were putative QTL, including that one QTL (qFL05.1) and four QTL (qFL23.1, qFM06.1, qFM06.2 and qFE25.1) were detected across three and two populations respectively; two QTL qFL10.1 (Yumian 1 × TAM 94L-25) and qFL15.1 (Yumian 1 × Acala Maxxa) were detected in three generations; qFM23.1, qFE18.1 and qFS21.2 detected in population (Yumian 1 × CA3084), qFE10.1, and qFS10.2 detected in population (Yumian 1 × TAM 94L-25), and qFS15.1 detected in population (Yumian 1 × Acala Maxxa), were all detected in two generations. Alleles underlying these stable QTL were valuable candidate gene for fine mapping, cloning, and favorable gene pyramiding projects. Our study also verified that QTL mapping of fiber quality traits using multiple populations with a common parent had higher efficiency compared to single population crossed with two parents and favorable alleles contributed to QTL effect could be conferred by parents with inferior fiber quality traits.