Influence of Foliar and Ground Fertilization on Yield,Fruit Quality,and Soil,Leaf, and Fruit Mineral Nutrients in Apple

ABSTRACT

The effectiveness of nitrogen (N)+ zinc (Zn) soil and foliar fertilizer applications on growth, yield, and quality of apple (Malus domestic Borkh ‘Golden Delicious’) fruit was studied in the Zanjan province, Iran. There were eight treatments 1) control (no fertilizer), 2) soil applied N, 3) soil applied Zn, 4) soil applied N+Zn, 5) foliar applied N, 6) foliar applied Zn, 7) foliar applied N+Zn and 8) combined soil and foliar applied N+Zn. The N source was urea [CO(NH₂)₂, 46% N] applied at 276 N tree^{? 1} yr^?1 and the Zn source was zinc sulfate (ZnSO₄,7H₂0, 23% Zn) applied at 110 g Zn tree^{? 1} yr^{? 1}. The soil treatments of N and Zn, were applied every two weeks during June through August (total of 6 times/year) in a 1 m radius around the tree trunk (drip line of trees). The foliar solutions of N (10 g l^{? 1} urea) and Zn [8 g l^{? 1} zinc sulfate (ZnSO₄)] were sprayed at the rate of 10 L tree^{? 1} every two weeks at the same times as described for soil applications. The highest yield (49 kg tree^{? 1}), and the heaviest fruits (202 g) were obtained in the soil and foliar combination of N+Zn treatment. The lowest yield (35 kg tree^{? 1}), and the smallest fruits (175 g) were recorded in the control. Nitrogen, and to a lesser extent Zn, foliar application resulted in decreasing fruit quality (caused russeting, and lower soluble solid), but increasing N leaf and fruit concentrations (2.4% DW and 563 mg kg^{? 1}, respectively). There were significant differences among yield and leaf mineral nutrient concentration in different treatments. But there was no significant difference between fruit mineral nutrient concentration (except N). Ratio of N/calcium (Ca), potassium (K)/Ca, and [magnesium (Mg)+K]/Ca in fruits were found suitable for fruit quality prediction. Combining the zinc sulfate with urea in the foliar applications increased the concentration of Zn from 0.7 to 1.5 mg per kg of apple tissue. Leaf N concentration varied during growth season. Foliar applied nutrient can be more efficient than soil applied, but a combination of soil and foliar applications is recommended for apple tree nutrient management.     

Response of Wheat Plants to Zinc,Iron, and Manganese Applications and Uptake and Concentration of Zinc,Iron, and Manganese in Wheat Grains

This experiment was conducted at Zahak Agricultural Research Station in the Sistan region in southeast Iran. A factorial design with three replications was used to determine the effects of zinc (Zn), iron (Fe), and manganese (Mn) applications on wheat yield, Zn, Fe, and Mn uptakes and concentrations in grains. Four levels of Zn [soil applications of 0, 40, and 80 kg ha^?1 and foliar application of 0.5% zinc sulfate (ZnSO₄) solution], two levels of iron sulfate (FeSO₄; 0 and 1%) as foliar application, and two levels of Mn (0 and 0.5%) also as foliar application were used in this study. Results showed that the interactive effects of Zn and Mn were significant on the number of grains in each spike. The highest number of grains resulted from the application of 80 kg ZnSO₄ ha^?1 and foliar Mn. The interactive effects of Zn and Fe were significant on weight of 1000 grains. The highest weight of 1000 grains resulted from application of 80 kg Zn and foliar Fe. Application of 80 kg ZnSO₄ ha^?1 alone and 80 kg ZnSO₄ ha^?1 with foliar application of Mn significantly increased grain yield in 2003. The 2‐year results showed that foliar application of Zn increased Zn concentration and Fe concentration in grains 99% and 8%, respectively. Foliar application of Fe resulted in a 21% increase in Fe concentration and a 13% increase in Zn concentration in grains. The foliar application of Mn resulted in a 7% increased in Mn concentration in grains.     

Zinc fertilization approaches for agronomic biofortification and estimated human bioavailability of zinc in maize grain

Maize (Zea mays L.) is generally low in bioavailable zinc (Zn); however, agronomic biofortification can cure human Zn deficiency. In the present experiment, Zn was applied in pots as ZnSO₄ · 7H₂O to maize cultivar DK-6142 as foliar spray (0.5% w/v Zn sprayed 25 days after sowing and 0.25% w/v at tasseling), surface broadcasting (16 kg Zn ha^?1), subsurface banding (16 kg Zn ha^?1 at the depth of 15 cm), surface broadcasting + foliar and subsurface banding + foliar in comparison to an unfertilized control. As compared to control, all treatments significantly (P ≤ 0.05) increased growth, yield and nutritional attributes in maize. Grain Zn and protein concentrations were correlated and ranged from 22.3 to 41.9 mg kg^?1 and 9 to 12 %, respectively. Zinc fertilization also significantly reduced grain phytate and increased grain Zn concentration. Zinc fertilization, especially broadcasting and subsurface banding combined with foliar spray decreased grain [phytate]:[Zn] ratio to 28 and 21 and increased Zn bioavailability by trivariate model of Zn absorption to 2.04 to 2.40, respectively. Conclusively, broadcasting and subsurface banding combined with foliar spray is suitable for optimal maize yield and agronomic Zn biofortification of maize grain. This would also be helpful to optimize Zn and protein concentration in maize grain.     

Agronomic biofortification of chickpea with zinc and iron through application of zinc and urea

ABSTRACT

Zinc (Zn) and iron (Fe) deficiency-related health problems in humans may be solved by improving their concentration in edible grains. The study, conducted in 2015–16 and 2016–17, investigated the effects of soil and foliar application of Zn and foliar application of urea on grain Zn and Fe accumulation of chickpea grains. Soil application of ZnSO₄ @ 25 kg ha^?1 + foliar spray of ZnSO₄ @ 0.5% at flowering and pod formation stages resulted in the highest Zn (45.06 & 44.69 mg Zn kg^?1 grain in the first and second year of study) and Fe (59.74 & 62.88 mg Fe kg^?1 grain) content. Urea application @ 2% at flowering and pod formation stages also resulted in the highest grain Zn (41.12 & 40.26 mg Zn kg^?1 grain) and Fe (58.95 & 61.95 mg Fe kg^?1 grain) content. Grain yield and protein content were significantly increased over control with these treatments. As compared to the sole application of Zn, the combined use of Zn and urea improved the grain Zn and Fe contents. Zinc and urea can be applied to improve Zn and Fe content in chickpea grains and, therefore, can help in ameliorating malnutrition in burgeoning human population.     

YIELD AND YIELD COMPONENTS OF UPLAND RICE AS INFLUENCED BY NITROGEN SOURCES

Ammonium sulfate and urea are main sources of nitrogen (N) for annual crop production in developing countries. Two greenhouse experiments were conducted using ammonium sulfate and urea as N sources for upland rice grown on a Brazilian Oxisol. The N rates used were 0, 50, 100, 150, 3000, and 400 kg N kg^?1 of soil. Yield and yield components were significantly increased in a quadratic fashion with increasing N rate. Ammonium sulfate X urea interaction was significant for grain yield, shoot dry matter yield, panicle number, plant height and root dry weight, indicating a different response magnitude of these plant parameters to two sources of N. Based on regression equation, maximum grain yield was achieved with the application of 380 mg N kg^?1 by ammonium sulfate and 271 mg N kg^?1 by urea. Grain yield and yield components were reduced at higher rates of urea (>300 mg kg N) but these plant parameters’ responses to ammonium sulfate at higher rates was constant. In the intermediate N rate range (125 to 275 mg kg^?1), urea was slightly better compared to ammonium sulfate for grain yield. Grain yield was significantly related with plant height, shoot dry weight, panicle number, grain harvest index and root dry weight. Hence, improving these plant characteristics by using appropriate soil and plant management practices can improve upland rice yield.     

Comparison of ammonium sulfate and urea as nitrogen sources in rice production

Wetland rice agriculture is the major anthropogenic source of methane, an important greenhouse gas. Methane emissions are less when ammonium sulfate (AS) rather than urea is the nitrogen (N) source. However, an agronomic advantage of AS over urea has not been established. The objectives of this study were: (i) to compare the effectiveness of AS, urea, and urea plus elemental sulfur (S) as sources of N in flooded rice culture, (ii) to compare fertilizer recovery of each source of N from application at preflood (PF) and panicle initiation (PI), and (iii) to determine if there is a response to S by rice grown on a soil with a less than optimum level of available S. ‘Cypress’ rice was . drill‐seeded in a Crowley silt loam soil (fine, montmorillonitic, thermic Typic Albaqualf) of 7.25 to 10.75 mg S kg^‐1. Ammonium sulfate, urea, or urea plus S was applied in split applications of 101 kg N ha^‐l PF and 50 kg N ha^‐1 PI. Microplots with retainers and ¹⁵N‐labeled N were used. Unlabeled N was used in field plots. Microplots were harvested at 50% heading, while field plots were harvested at maturity. Dry matter and total N accumulation at 50% heading and at maturity were similar regardless of N source. Grain dry matter yields were 8.54, 8.47, and 8.79 Mg ha^‐1 for AS, urea, and urea plus S treatments, respectively. Greater N recovery was generally found from N application at PI than at PF, but this was not reflected by an increase in grain yield. No response to S was detected, although grain yields were slightly higher when S‐containing fertilizers were used. Ammonium sulfate and urea were equally effective for flooded rice production in Louisiana.     

氮锌配施对不同玉米品种灌浆期生理特性和籽粒氮锌含量的影响

提高粮食作物中可食部分的锌生物有效性是解决人体缺锌的重要措施。为研究氮锌肥料施用对玉米籽粒锌营养的影响,本研究以郑单958和谷神玉66为试验材料,在大田条件下研究3个氮水平(90、180 和225 kg N·hm^-2)和2个喷锌处理(0和4.5 kg·hm^-2 ZnSO₄·7H₂O)下玉米籽粒产量和氮锌含量以及灌浆期叶片生理特性的变化。结果表明,吐丝后,与施氮量90 kg·hm^-2处理相比,施氮量180和225 kg·hm^-2处理提高了吐丝后穗位叶SPAD值及硝酸还原酶(NR)、谷氨酰胺合成酶(GS)、碳酸酐酶(CA)、超氧化物歧化酶(SOD)活性和灌浆后期PSⅡ综合性能指数(PI),降低了丙二醛(MDA)含量。施锌能提高吐丝后穗位叶CA、SOD、过氧化物酶(POD)、过氧化氢酶(CAT)活性和灌浆后期SPAD值和PI,降低MDA含量。2个品种相比,谷神玉66灌浆后期穗位叶SPAD值、叶片初始荧光(F_o)和最大荧光(F_m)较高,而灌浆前期穗位叶PI和吐丝后NR、CA、SOD以及POD活性则以郑单958较高。施氮量为90 kg·hm^-2时,玉米籽粒产量平均为8.55 t·hm^-2,随着施氮量增加,玉米籽粒产量显著提高。籽粒中氮含量以施氮量180 kg·hm^-2时最高,为14.85 g·kg^-1。施氮量90和180 kg·hm^-2时,籽粒锌含量平均为27.2 mg·kg^-1,显著高于施氮量225 kg·hm^-2处理。与不施锌相比,喷锌后玉米籽粒产量未有显著变化,籽粒中氮、锌含量分别增加了11.7%和18.0%。郑单958籽粒产量较谷神玉66提高了3.8%,籽粒氮锌含量则分别减少了11.9%和5.3%。综合来看,施氮量为180 kg N·hm^-2时,与喷施ZnSO₄·7H₂O 4.5 kg·hm^-2 配合施用能够增强玉米灌浆期叶片SPAD和荧光特性,提高氮锌代谢关键酶活性,增强氧自由基清除系统酶活性,减弱膜脂过氧化作用的伤害,促进籽粒中氮、锌的吸收和累积。本研究结果可为玉米生产中优化锌生物强化措施提供理论依据。     

Influence of Urea and Ammonium Sulfate on Soil Acidity Indices in Lowland Rice Production

Urea and ammonium sulfate are principal nitrogen (N) sources for crop production. Two field experiments were conducted during three consecutive years to evaluate influence of urea and ammonium sulfate application on grain yield, soil pH, calcium (Ca) saturation, magnesium (Mg) saturation, base saturation, aluminum (Al) saturation, and acidity (H + Al) saturation in lowland rice production. Grain yield was significantly influenced by urea as well as ammonium sulfate fertilization. Soil pH linearly decreased with the application of N by ammonium sulfate and urea fertilizers. However, the magnitude of the pH decrease was greater by ammonium sulfate than by urea. The Ca and Mg saturations were decreased at the greater N rates compared to low rates of N by both the fertilizer sources. The Al and acidity saturation increased with increasing N rates by both the fertilizer sources. However, these acidity indices were increased more with the application of ammonium sulfate compared with urea. Rice grain yield had negative associations with pH, Ca saturation, Mg saturation, and base saturation and positive associations with Al and acidity saturation. This indicates that rice plant is tolerant to soil acidity.     

Zinc bioavailability response curvature in wheat grains under incremental zinc applications

Zinc application is generally recommended to enrich wheat grains with Zn; however, its influence on Zn bioavailability to humans has not received appreciable attention from scientists. In this pot experiment, seven Zn rates (from 0 to 18 mg kg^?1 soil) were applied to two wheat cultivars (Shafaq-2006 and Auqab-2000). Application of Zn significantly increased grain yield, grain Zn concentration and estimated Zn bioavailability, and significantly decreased grain phytate concentration and [phytate]:[Zn] ratio in wheat grains. The response of grain yield to Zn application was quadratic, whereas maximum grain yield was estimated to be achieved at 10.8 mg Zn kg^?1 soil for Shafaq-2006 and 7.4 mg Zn kg^?1 soil for Auqab-2000. These estimated Zn rates were suitable for increasing grain Zn concentration and Zn bioavailability (>2.9 mg Zn in 300 g grains) to optimum levels required for better human nutrition. Conclusively, Zn fertilization for Zn biofortification may be practiced on the bases of response curve studies aimed at maximizing grain yield and optimum Zn bioavailability. Moreover, additive Zn application progressively reduced the grain Fe concentration and increased the grain [phytate]:[Fe] ratio. However, a medium Zn application rate increased grain Ca concentration and decreased the grain [phytate]:[Ca] ratio. Hence, rate of Zn application for mineral biofortification needs to be carefully selected.     

氮肥用量和喷施锌钾肥对小麦籽粒锌含量及生物有效性的影响

[目的]小麦籽粒锌(Zn)含量普遍较低,在没有外源锌施用措施下难以满足以小麦为主食人群健康所需.探索提升小麦籽粒Zn含量,尤其是其加工产品面粉Zn含量和Zn生物有效性的农艺措施,具有实际重要的意义.[方法]于2013、2014年分别在陕西杨凌示范区和三原试验站进行小麦田间试验,两地均为潜在缺锌石灰性土壤,DTPA-Zn...     

Yield enhancement and biofortification of chickpea (Cicer arietinum L.) grain with iron and zinc through foliar application of ferrous sulfate and urea

Abstract

This study investigated effects of iron (Fe) and nitrogen (N) foliar application on Fe and zinc (Zn) content in chickpea grain, grain yield, and protein content. Application of FeSO₄ at 0.5% at flowering?+?pod formation stages resulted in the highest Fe (73.50 and 75.34?mg Fe kg^?1 grain in first and second year) and Zn (35.08 and 34.21?mg Zn kg^?1 grain) content in grain followed by the application of FeSO₄ at 0.5% at flowering stage alone (68.27 and 69.97?mg Fe kg^?1 grain and 32.44 and 32.27?mg Zn kg^?1 grain) and control (54.63 and 55.69?mg Fe kg^?1 grain and 29.48 and 29.07?mg Zn kg^?1 grain). Urea spray at 2% at flowering as well as at flowering?+?pod formation stages also improved the Zn and Fe content in the grain. Combined use of Fe and urea improved the grain Fe and Zn content over sole application of Fe.     

Biofortification of Durum Wheat with Zinc Through Soil and Foliar Applications of Nitrogen

Increasing zinc (Zn) concentration of cereal grains is a global challenge to alleviate Zn deficiency‐related health problems in humans caused by low dietary Zn intake. This study investigated the effects of soil‐ and foliar‐applied nitrogen (N) and Zn fertilizers on grain Zn accumulation of durum wheat (Triticum durum) grown on a Zn‐deficient soil. In addition, localization of Zn and protein within durum wheat grain was studied by using Bradford reagent for protein and dithizone (diphenyl thiocarbazone) for Zn. Grain Zn concentration was greatly enhanced by soil or foliar applications of Zn. When Zn supply was adequately high, both soil and foliar N applications improved grain Zn concentration. Consequently, there was a significant positive correlation between grain concentrations of Zn and N, when Zn supply was not limiting. Protein and Zn staining studies showed co‐localization of Zn and protein within grain, particularly in the embryo and aleurone. Results indicate that N and Zn fertilization have a synergistic effect on grain Zn concentration. Possibly, increasing N supply contributes to grain Zn concentration by affecting the levels of Zn‐chelating nitrogenous compounds or the abundance of Zn transporters. Our results suggest that nitrogen management can be an effective agronomic tool to improve grain Zn concentration.     

Sources,Rates and Time of Nitrogen Application on Maize Crops under No-Tillage System

Quantitatively, nitrogen (N) is the foremost nutrient for maize crops (Zea mays L.), but the N source to increase the grain productivity still needs more investigation. Thus, the aim of this experiment was to study sources, rates and time of N application on the crop yield and agronomic characteristics of the maize under no-tillage system. The experiment was carried out during two growing seasons on an Oxisol under the factorial 5 × 3 × 3 scheme with five N rates (0, 50, 100, 150, and 200 kg ha^?1) and three sources (ammonium-sulfate-nitrate as inhibitor of the nitrification (ASN+I), ammonium sulfate (AS) and urea); we applied them two times with four replicates: first time at the sowing or later under side dressing when the plants had the six leaves stage. In the first year, the sources of N had no influence on the number of grain line /ear (NGLE), grain number/line (GNL), total number of grain/ear (TNFE), biomass of 100 grain, plant height (PH), height of the first ear insertion (AFEI) and stalk diameter, in contrast with the foliar N content and the crop yield. Early fertilization with N at the sowing time can afford applications as well as the total side dressing. The increase of the rates had positive influence on the N foliar content, plant height and 100 grains biomass. The highest productivities were found with rates above the threshold of 150 kg ha^?1, no matter the sources and the fertilization time.     

Barley responses to copper foliar spray concentrations when grown in a calcareous soil

This study was designed to determine the adequate copper (Cu) foliar spray concentration to correct Cu deficiency on barley (Hordeum vulgare L.) when grown in a calcareous soil. Five Cu foliar spray solution levels were tested (0% or control; 0.03%, 0.06%, 0.13%, and 0.33%). Copper was applied in the sulfate form at the early boot stage. The results showed that Cu flag leaf concentration was increased with the highest Cu application (0.33%), while Cu concentration in the grain was increased with a spray of 0.03%. An antagonism between Cu, Zn, and Fe leaf concentration was observed. Grain yield and harvest index showed a linear positive response to Cu foliar spray concentrations. A significant increase of 19.6% on grain yield was recorded with a foliar spray 0.33% of Cu.     

Ammonia volatilization from ammonium sulphate,ammonium nitrate,and urea surface applied to winter wheat on a calcareous soil

Abstract

Ammonia (NH₃) volatilization losses from surface‐applied ammonium sulphate (AS), ammonium nitrate (AN), and urea to winter wheat and the effects of the NBPT [N‐(n‐butyl) thiophosphoric triamide], PG (Phospho‐gypsum), and PR (byproduct‐Pyrite) were determined in a field experiment. Effects on grain yield and protein content of the grain were also measured. Total NH₃ losses from AS, AN, and urea varied from 13.6–19.5%, 4.4–6.4%, and 3.9–12.0% depending on the compounds and their levels added to nitrogen (N) fertilizers, respectively. The compounds added to AS and AN increased NH₃‐N losses with respect to unamended fertilizers (control). On the other hand, while urea treatments with two tons of PG/ha increased NH₃ losses, the other compounds decreased the losses. The highest reductions of NH₃ loss were observed with NBPT 0.50% and NBPT 0.25% by 63.4% and 52.8%, respectively. Although the effect of nitrogeneous fertilizers on total N losses and protein content of wheat grain was found statistically significant (p<0.01), as the compounds applied with N fertilizers have had no significant effect. Also, a negative and highly significant correlation (r = ‐0.69???) was found between total N loss and protein content of the grain.     

The effectiveness of seed priming and foliar application of zinc- amino acid chelates in comparison with zinc sulfate on yield and grain nutritional quality of common bean

Abstract

The efficacy of seed priming and foliar application of zinc-amino acid chelates including zinc-histidine [Zn(His)₂] and zinc-methionine [Zn(Met)₂] in comparison with zinc sulfate (ZnSO₄) on yield and grain nutritional quality of two common bean cultivars (Phaseolus vulgaris L., cvs Talash and Sadri) was investigated in a severely Zn-deficient calcareous soil (DTPA-Zn: 0.38?mg kg^?1 soil) in a pot experiment. Bean response to Zn application varied depending on the Zn fertilizer, application method and cultivar. In ‘Talash’, seed priming with [Zn(His)₂] and [Zn(Met)₂] led to 24.1 and 11.6% increase in the grain yield of bean in comparison with ZnSO₄ treatment, respectively. In both cultivars, foliar application of [Zn(His)₂] led to significant increase in the grain yield in comparison with ZnSO₄. The highest grain Zn concentration was obtained by seed priming with [Zn(Met)₂] in ‘Sadri’ and [Zn(His)₂] in ‘Talash’, respectively. For Zn-amino acid chelates, seed priming was more effective than foliar application in increasing grain yield and Zn concentration. Foliar application of [Zn(His)₂] and [Zn(Met)₂] in ‘Sadri’ and [Zn(Met)₂] in ‘Talash’ resulted in higher protein content in bean grain as compared with ZnSO₄. In both cultivars, foliar application of [Zn(Met)₂] was the more effective than seed priming to increase grain protein content. The highest water-soluble carbohydrates concentration of grain was obtained by seed priming with [Zn(Met)₂] and [Zn(His)₂] in ‘Sadri’ and ‘Talash’ cultivars, respectively. Therefore, seed priming with [Zn(His)₂] and ZnSO₄ in ‘Sadri’ and [Zn(Met)₂] in ‘Talash’ can effectively be used for improving yield of common bean in Zn-deficient calcareous soils.     

Zinc bioavailability in maize grains in response of phosphorous–zinc interaction

Phosphorous (P) and zinc (Zn) are plant nutrients that interact with each other in soil–plant systems. Such interactions may cause deficiency of one of the nutrients interacting with each other if interactions are antagonistic. In the present trial, a field experiment was conducted to investigate the interactive effect of Zn (0 and 16 kg ha^?1) and P (0 and 60 kg ha^?1) on growth, yield and grain Zn concentration of two maize (Zea mays L.) genotypes, i.e., Neelam (local) and DK‐6142 (hybrid). Growth and yield of both maize genotypes were increased by the application of Zn and P treatments compared with control, but Zn+P was more effective than their sole application. When compared to control, combined application of Zn+P increased grain Zn and P concentrations by 52% and 32%, respectively, averaged for the two genotypes. Single application of P decreased grain Zn concentration by 10% over control. Application of P and Zn particularly in combination decreased the grain [phytate] : [Zn] ratio and increased the estimated human Zn bioavailability in grains based on a trivariate model of Zn absorption in both maize genotypes. Conclusively, combined Zn+P application appeared more suitable for enhancing grain yield and agronomic Zn biofortification in maize grains. However, Zn fertilization aiming at increasing grain yield and grain Zn concentration should consider the genotypic variations and P rate.     

旱地高产小麦品种籽粒锌含量差异与产量构成和锌吸收利用的关系

【目的】 明确旱地条件下高产小麦品种籽粒锌含量差异与产量构成及锌吸收利用的关系,对通过品种选育和施肥调控提高旱地小麦籽粒产量和锌营养,实现小麦高产优质生产有重要意义。 【方法】 于2013—2016年连续三年在黄土高原典型旱地进行了小麦裂区田间试验。 以我国主要麦区的123个小麦品种为试材,每个品种设置不施肥和施N 150 kg/hm2、P₂O₅ 100 kg/hm2两个处理。分析了高产小麦籽粒锌含量差异及其与干物质累积、产量构成、锌吸收和分配之间的关系。 【结果】 施肥条件下,高产小麦品种籽粒锌含量存在显著差异,小麦籽粒锌含量与籽粒产量间无显著相关性,但与千粒重、锌吸收量、锌收获指数和籽粒锌形成效率呈显著正相关,与穗粒数呈显著负相关。在高产品种中,无论施肥与否高锌品种的籽粒锌含量均显著高于低锌品种;高锌品种的籽粒锌含量因施肥而显著提高,低锌品种却降低。施肥条件下,高锌品种的籽粒产量、生物量和收获指数与低锌品种相比无显著差异,穗数却显著降低;高锌品种的籽粒锌吸收量、地上部锌吸收量、锌收获指数和籽粒锌形成效率均显著高于低锌品种。且高锌品种的产量、生物量、穗数、穗粒数和锌吸收量因施肥引起的提高幅度均亦显著高于低锌品种。 【结论】 在黄土高原旱地低锌土壤上,无论是品种选育还是施肥调控,促进小麦锌的吸收和向籽粒的转移是提高小麦籽粒锌含量的关键。      

CUMULATIVE AND RESIDUAL EFFECTS OF ZINC SULFATE ON GRAIN YIELD,ZINC, IRON,AND COPPER CONCENTRATION IN CORN AND WHEAT

Re-application of zinc (Zn) sulfate for corn (Zea mays L.) production in rotation of wheat-corn has varied effects on yield of crops grown in Zn deficient soils. Therefore, this study was done as split plots in a complete randomized block design (CRBD) where the main plots were control with and without Zn application in wheat (Triticum aestivum L.) production. Sub-plots were of control, without Zn fertilizer, base application of 75 kg per hectare (kg Zn ha^?1), 25% and 50% less than base application and as foliar spray in combination with the 4 soil Zn treatments for corn production. Effect of previous Zn application on grain Zn concentration of corn was significant (P < 0.01). Zinc concentrations in treatments of without previous Zn (nil Zn) application and with Zn application were 28.1 and 31.8 mg kg^?1, respectively. Soil application of 75 kg ha^?1 and foliar application of Zn sulfate gave the highest yield (8853 kg ha^?1) showed an increase of 25 percent in compared with nil-Zn. Although re-application of Zn has small effect on yield, but resulted in was the highest grain concentration.     

Efficiency of Coated Urea on Nutrient Uptake and Maize Production

A field experiment was conducted to study the effects of coated urea with urease inhibitor [copper (Cu) and zinc (Zn)], nitrification inhibitor (DMPP), biochar and geopolymer on ammonium, nitrate, Cu, Zn content and crop yield of maize. The treatments were composed of urea alone (control), urea coated Cu and Zn (UCuZn), urea coated with Cu, Zn, and DMPP (UCuZnDMPP), urea impregnated with biochar (Ubio) and urea coated with geopolymer (Ug2). Data showed that treatments with Cu, Zn, and DMPP produced lower ammonium (NH₄) and nitrate (NO₃) in UCuZn and UCuZnDMPP while they had the highest concentration of Cu and Zn in soil and plant tissues. Plots treated with UCuZn and UCuZnDMPP produced maximum N concentrations in grains and yield, with increases by 79.5% and 74.1%, respectively, as compared with urea (control). This finding demonstrates that by slow down the hydrolysis and nitrification process using urease and nitrification inhibitor were beneficial to increased N uptake, ultimately produced higher yield.