Mixture approach for optimizing lycopene extraction from tomato and tomato products

A simple mixture process design based on the comparison of both quadratic and special cubic models and involving three mixture components (hexane/acetone/ethanol) as a solution for extracting lycopene from raw tomato, tomato sauce, and tomato paste was used to confirm the hypothesis that lycopene extraction rates are a function of the solvent used during the extraction process. Conventional criteria (p 相似文献   

Detection of key factors in the extraction and quantification of lycopene from tomato and tomato products

The analytical process of lycopene extraction and photometrical determination was critically examined for raw tomato and processed tomato products by means of a 2 IV (15-10) Plackett-Burman experimental design in order to identify the key factors (KFs) involved. Fifteen apparent key factors (AKFs) reported in the literature were selected: sample weight (X1); volume of extraction solution (X2); antioxidant concentration (BHT, X3); neutralizing agent concentration (MgCO 3, X4); light presence during lycopene extraction (X5), homogenization velocity (X6) and time (X7), agitation time (X8), and temperature (X9) during the extraction process; water volume for separation of polar/nonpolar phases (X11); presence of inert atmosphere throughout the process (X12); time (X13), temperature (X14), and light presence (X10) during separation of phases and time delay for reading (X15). In general, higher lycopene concentrations in samples led to a higher number of key factors (KF). Thus, for raw tomato (lycopene range 1.22-2.29 mg/100 g) no KF were found, whereas for tomato sauce (lycopene range from 5.80 to 8.60 mg/100 g) one KF (X4) and for tomato paste (lycopene range from 35.80 to 51.27 mg/100 g) five KFs (X1, X2, X4, X11, and X12) were detected. For lycopene paste, X1 and X2 were identified as the KFs with the greatest impact on results, although in fact the X1/X2 ratio was the real cause. The results suggest that, with increased processing, the physical and chemical structure of lycopene becomes less important since the identified KFs explain almost 90% of variability in tomato paste but only 32% in raw tomato.     

Supercritical fluid extraction of lycopene from tomato processing byproducts

Tomato seeds and skins acquired from the byproduct of a local tomato processing facility were studied for supercritical fluid extraction (SFE) of phytochemicals. The extracts were analyzed for lycopene, beta-carotene, alpha-carotene, alpha-tocopherol, gamma-tocopherol, and delta-tocopherol content using high-performance liquid chromatography-electrochemical detection and compared to a chemically extracted control. SFEs were carried out using CO(2) at seven temperatures (32-86 degrees C) and six pressures (13.78-48.26 MPa). The effect of CO(2) flow rate and volume also was investigated. The results indicated that the percentage of lycopene extracted increased with elevated temperature and pressure until a maximum recovery of 38.8% was reached at 86 degrees C and 34.47 MPa, after which the amount of lycopene extracted decreased. Conditions for the optimum extraction of lycopene from 3 g of raw material were determined to be 86 degrees C, 34.47 MPa, and 500 mL of CO(2) at a flow rate of 2.5 mL/min. These conditions resulted in the extraction of 61.0% of the lycopene (7.19 microg lycopene/g).     

Extraction of lycopene from tomato skin with supercritical carbon dioxide: effect of operating conditions and solubility analysis

Supercritical carbon dioxide (SCCO2) extraction of lycopene from waste tomato skins was investigated. The experiments were carried out at pressures and temperatures ranging from 20 to 50 MPa and 313 to 373 K, respectively, without any modifiers. The flow rate of CO2 was maintained at 2.5 mL/min for 330 min extraction time. Solvent flow rate effect was examined for CO2 flow rates from 1.5 to 4.5 mL/min. The extracts were analyzed by high-performance liquid chromatography and UV-visible spectroscopy. The results showed that with optimized operating conditions, the maximum yield of lycopene (1.18 mg of lycopene/g of sample) was obtained at 40 MPa, 373 K, and 2.5 mL of CO2/min. Chromatographic analysis indicated that lycopene was extracted from tomato skin with negligible degradation at the optimum conditions and the amount extracted represented more than 94% of the total carotenoid content of the sample. The solubility of lycopene was modeled by use of the Chrastil equation.     

Evaluation of fatty acid extraction methods for Thraustochytrium sp. ONC-T18

Various extraction methods were assessed in their capacity to extract fatty acids from a dried biomass of Thraustochytrium sp. ONC-T18. Direct saponification using KOH in ethanol or in hexane:ethanol was one of the most efficient techniques to extract lipids (697 mg g(-1)). The highest amount of fatty acids (714 mg g(-1)) was extracted using a miniaturized Bligh and Dyer extraction technique. The use of ultrasonics to break down cell walls while extracting with solvents (methanol:chloroform) also offered high extraction yields of fatty acids (609 mg g(-1)). Moreover, when the transesterification mixture used for a direct transesterification method was doubled, the extraction of fatty acids increased approximately 77% (from 392 to 696 mg g(-1)). This work showed that Thraustochytrium sp. ONC-T18 has the ability to produce over 700 mg g(-1) of lipids, including more than 165 mg g(-1) of docosahexaenoic acid, which makes this microorganism a potential candidate for the commercial production of polyunsaturated fatty acids. Finally, other lipids, such as myristic, palmitic, palmitoleic, and oleic acids, were also produced and recovered in significant amounts (54, 196, 123, and 81 mg g(-1)), respectively.     

Supercritical CO(2) extraction of beta-carotene and lycopene from tomato paste waste

Lycopene and beta-carotene were extracted from tomato paste waste using supercritical carbon dioxide (SC-CO(2)). To optimize supercritical fluid extraction (SFE) results for the isolation of lycopene and beta-carotene, a factorial designed experiment was conducted. The factors assessed were the temperature of the extractor (35, 45, 55, and 65 degrees C), the pressure of the extraction fluid (200, 250, and 300 bar), addition of cosolvent (5, 10, and 15% ethanol), extraction time (1, 2, and 3 h), and CO(2) flow rate (2, 4, and 8 kg/h). The total amounts of lycopene and beta-carotene in the tomato paste waste, extracts, and residues were determined by HPLC. A maximum of 53.93% of lycopene was extracted by SC-CO(2) in 2 h (CO(2) flow rate = 4 kg/h) at 55 degrees C and 300 bar, with the addition of 5% ethanol as a cosolvent. Half of the initially present beta-carotene was extracted in 2 h (flow rate = 4 kg/h), at 65 degrees C and 300 bar, also with the addition of 5% ethanol.     

Development of a rapid method for the sequential extraction and subsequent quantification of fatty acids and sugars from avocado mesocarp tissue

Methods devised for oil extraction from avocado (Persea americana Mill.) mesocarp (e.g., Soxhlet) are usually lengthy and require operation at high temperature. Moreover, methods for extracting sugars from avocado tissue (e.g., 80% ethanol, v/v) do not allow for lipids to be easily measured from the same sample. This study describes a new simple method that enabled sequential extraction and subsequent quantification of both fatty acids and sugars from the same avocado mesocarp tissue sample. Freeze-dried mesocarp samples of avocado cv. Hass fruit of different ripening stages were extracted by homogenization with hexane and the oil extracts quantified for fatty acid composition by GC. The resulting filter residues were readily usable for sugar extraction with methanol (62.5%, v/v). For comparison, oil was also extracted using the standard Soxhlet technique and the resulting thimble residue extracted for sugars as before. An additional experiment was carried out whereby filter residues were also extracted using ethanol. Average oil yield using the Soxhlet technique was significantly (P < 0.05) higher than that obtained by homogenization with hexane, although the difference remained very slight, and fatty acid profiles of the oil extracts following both methods were very similar. Oil recovery improved with increasing ripeness of the fruit with minor differences observed in the fatty acid composition during postharvest ripening. After lipid removal, methanolic extraction was superior in recovering sucrose and perseitol as compared to 80% ethanol (v/v), whereas mannoheptulose recovery was not affected by solvent used. The method presented has the benefits of shorter extraction time, lower extraction temperature, and reduced amount of solvent and can be used for sequential extraction of fatty acids and sugars from the same sample.     

Optimization of the extraction of antioxidative constituents of six barley cultivars and their antioxidant properties

Response surface methodology (RSM) was used to predict the optimum conditions of extraction of barley samples (organic solvent percent in the extraction medium, temperature, and time). Antioxidant capacity in the barley meals was highest under optimum extraction conditions of 80.2% methanol and 60.5 degrees C for 38.36 min as predicted by RSM. Phenolic antioxidative compounds of six barley cultivars, namely, Falcon, AC Metcalfe, Tercel, Tyto, Phoenix, and Peregrine, were extracted under the conditions obtained by RSM after defatting with hexane, and subsequently the extracts were assessed for their antioxidant and antiradical activities and metal chelation efficacy. The potential of barley extracts in inhibiting peroxyl and hydroxyl radical induced supercoiled DNA double-strand scission was also studied. Total phenolic content as measured according to Folin-Ciocalteu's method ranged from 13.58 to 22.93 mg of ferulic acid equiv/g of defatted material, with the highest content in Peregrine. Total antioxidant activity as measured by Trolox equivalent antioxidant capacity ranged from 3.74 to 6.82 micromol/g of defatted material. Metal chelation capacity of the extracts as measured by 2,2'-bipyridyl competition assay varied from 1.1 to 2.1 micromol of ethylenediaminetetraacetic acid equiv/g of defatted material. IC(50) values for 1,1-diphenyl-2-picrylhydrazyl radical as measured by electron paramagnetic resonance ranged from 1.51 to 3.33 mg/mL, whereas the corresponding values for hydroxyl radical ranged between 2.20 and 9.65 mg/mL. Inhibition of peroxyl radical induced supercoiled DNA scission ranged from 78.2 to 92.1% at the concentration of 4 mg/mL of extracts, whereas the corresponding values for hydroxyl radical induced DNA scission ranged from 53.1 to 65.3%.     

苹果渣多酚提取工艺的优化

为优化苹果渣中多酚提取工艺,并得到提取工艺和多酚组成之间的关系,利用微波辅助提取法设计了由物料颗粒、液料比、乙醇浓度、微波功率和微波提取时间5个因素构成的多酚提取优化试验流程,构建了涵盖黄酮、原花青素2种典型多酚物质和抗氧化能力的提取工艺评价指标体系。采用证据理论对不同工艺在评价指标下的焦元进行识别,并基于信度函数和似真函数得到了不同提取工艺的效用区间和优化方案。优化结果为：物料颗粒60目,液料比30?mL/g,乙醇体积分数60%,微波功率600?W,提取时间70?s,此条件下苹果渣多酚的提取量为213.83?mg/100g,黄酮提取量为83.21?mg/100g,原花青素提取量为52.79?mg/100g,抗氧化的EC50值为3.71?mg/100mL,验证了采用证据理论进行苹果渣多酚提取工艺优化的有效性。     

Processing effects on lycopene content and antioxidant activity of tomatoes

Consumption of tomato products has been associated with decreased risk of some cancer types, and the tomato antioxidant, lycopene, is thought to play an important role in the observed health effects. In this study, four carotenoids, trans-lycopene, phytofluene, phytoene, and zeta-carotene, were quantified in tomato products. Samples of raw tomatoes, tomato juice after hot break scalder, and final paste were obtained from two different processing plants over two years. Comparison of carotenoid levels throughout processing indicated that lycopene losses during processing of tomatoes into final paste (25-30 degrees Brix) ranged from 9 to 28%. The initial Brix level of the raw tomatoes appeared to influence the amount of lycopene loss that occurred, possibly due to the differences in processing time required to achieve the final desired Brix level of the paste. In general, no consistent changes in the other carotenoids were observed as a function of processing. The antioxidant activity of fresh tomatoes, tomato paste, and three fractions obtained from these products (i.e., aqueous, methanol, and hexane fractions) was also determined. In both a free radical quenching assay and a singlet oxygen quenching assay, significant antioxidant activity was found in both the hexane fraction (containing lycopene) and the methanol fraction, which contained the phenolic antioxidants caffeic and chlorogenic acid. The results suggest that in addition to lycopene, polyphenols in tomatoes may also be important in conferring protective antioxidative effects.     

Biosynthesis of 14C-phytoene from tomato cell suspension cultures (Lycopersicon esculentum) for utilization in prostate cancer cell culture studies

This work describes the development and utilization of a plant cell culture production approach to biosynthesize and radiolabel phytoene and phytofluene for prostate cancer cell culture studies. The herbicide norflurazon was added to established cell suspension cultures of tomato (Lycopersicon esculentum cv. VFNT cherry), to induce the biosynthesis and accumulation of the lycopene precursors, phytoene and phytofluene, in their natural isomeric forms (15-cis-phytoene and two cis-phytofluene isomers). Norflurazon concentrations, solvent carrier type and concentration, and duration of culture exposure to norflurazon were screened to optimize phytoene and phytofluene synthesis. Maximum yields of both phytoene and phytofluene were achieved after 7 days of treatment with 0.03 mg norflurazon/40 mL fresh medium, provided in 0.07% solvent carrier. Introduction of 14C-sucrose to the tomato cell culture medium enabled the production of 14C-labeled phytoene for subsequent prostate tumor cell uptake studies. In DU 145 prostate tumor cells, it was determined that 15-cis-phytoene and an oxidized product of phytoene were taken up and partially metabolized by the cells. The ability to biosynthesize, radiolabel, and isolate these carotenoids from tomato cell cultures is a novel, valuable methodology for further in vitro and in vivo investigations into the roles of phytoene and phytofluene in cancer chemoprevention.     

Quantitative analysis of anti-inflammatory and radical scavenging triterpenoid esters in evening primrose seeds

Lipophilic triterpenoidal esters with radical scavenging and cyclooxygenase inhibitory properties were recently found in cold-pressed, nonraffinated evening primrose oil (EPO). A quantitative assay for the analysis of 3-O-trans-caffeoyl derivatives of betulinic, morolic, and oleanolic acid in evening primrose seeds was developed and validated. Extraction efficiency >99% was achieved by means of pressurized liquid extraction with two extraction cycles and 80% (v/v) ethanol at 120 degrees C. Analysis of esters was by normal-phase high-performance liquid chromatography on a Diol column and hexane/ethyl acetate (containing 0.1% formic acid) (65:35) as the eluent. The analytes were determined without further prepurification. Seeds from defined cultures of Oenothera biennis, Oenothera lamarckiana, and Oenothera ammophila, grown under identical conditions, were analyzed. The cultures originated from seeds from eight collections in the wild and from selections from five cultivars. The content of total triterpenoidal esters in seeds varied between 1.34 and 2.78 mg/g. Three types of qualitative patterns were observed for the triterpenoidal esters. The influence of different harvest times and plant treatments was studied with the cultivar Anothera. Variations between 1.5 and 2.3 mg/g were found.     

Characterization of high purity lycopene from tomato wastes using a new pressurized extraction approach

In this paper, a method for the extraction of high purity lycopene from tomato wastes is presented. The method is based on a pressurized extraction that uses the Extractor Naviglio, and it is performed in the 0.7-0.9 MPa range. Tomato skin, the byproduct deriving from manufacturing of tomato, in a water dispersion, are used as starting material. Lycopene is transferred, for the effect of the high pressure used, in the form of molecular aggregates into the water as a dispersion, while apolar compounds remain in the matrix. The aggregates are easily purified in a single subsequent step by using methanol, thus, obtaining lycopene at 98% chromatographic purity or higher. A new stationary phase, phenyl-hexyl silicone, and a simple water/acetonitrile gradient were used for HPLC analysis of lycopene. The extract was characterized by UV-Vis spectrophotometry, (1)H NMR, (13)C NMR, and electrospray ionization mass spectrometry. An average recovery of 2.8 mg lycopene/kg tomato waste can be obtained after 4 hours of extraction and using tap water as the extracting liquid. The recovery percentage was of about 10%. The exhausted tomato byproduct can be easily dried and used in agriculture or as feeding for animals.     

Mechanochemical-assisted extraction and antioxidant activities of kaempferol glycosides from Camellia oleifera Abel. meal

A mechanochemical-assisted extraction (MCAE) method was proposed and investigated for the fast extraction of two kaempferol glycosides (kaempferol-3-O-[2-O-β-D-galactopyranosyl-6-O-α-L-rhamnopyranosyl]-β-D-glucopyranoside and kaempferol-3-O-[2-O-β-D-xylopyranosyl-6-O-α-L-rhamnopyranosyl]-β-D-glucopyranoside) from Camellia oleifera Abel. meal. The effects of operating parameters in terms of NaOH content, grinding time, extraction time, and ratio of solution to solid were evaluated by means of response surface methodology (RSM). Under the optimal conditions with a ratio of material to NaOH of 20:1 (g/g), a milling time of 15 min, and a ratio of solution to solid of 20:1 (mL/g) for 60 min, the maximum extraction yields of the two kaempferol glycosides reached 13.34 and 13.83%, respectively. The antioxidant activity of kaempferol glycosides extract was assessed by 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical-scavenging assay and ferric thiocyanate (FTC) assay. Compared with the heat reflux extraction (HRE) method, the yield and the antioxidant activities of the extracts from MCAE with water as solvent were higher and stronger.     

超声波-表面活性剂协同萃取苦瓜皂苷

为了探索快速有效的苦瓜皂苷提取方法,该文利用响应面法研究了超声功率（133～167 W/g）、乙醇体积分数（60%～80%）、十二烷基硫酸钠（SDS）质量浓度（15～25 mg/mL）对苦瓜皂苷萃取率的影响,并对所得苦瓜皂苷的结构进行初步鉴定。结果表明响应面所建立的苦瓜皂苷提取模型能很好地预测不同提取条件下的苦瓜皂苷提取率。超声功率、乙醇体积分数、SDS质量浓度均对苦瓜皂苷提取率存在显著影响（p<0.05）,其中超声波功率与SDS质量浓度间存在协同作用。验证试验表明超声功率为153 W/g,乙醇体积分数为74%,SDS质量浓度为16 mg/mL,苦瓜皂苷提取率达到3.22%,显著高于（p<0.05）乙醇及超声萃取。液相色谱-多级质谱表明所萃取的皂苷由苦瓜皂苷L和苦瓜皂苷F2组成。超声波-表面活性协同萃取是一种有效的提取皂苷方法,值得进一步的开发应用。     

Chemical composition of volatile extract and biological activities of volatile and less-volatile extracts of juniper berry (Juniperus drupacea L.) fruit

Volatile chemicals in a dichloromethane extract from a steam distillate of juniper berry fruit (Juniperus drupacea L.) and its two column chromatographic fractions (eluted with hexane and ethyl ether) were analyzed by gas chromatography/mass spectrometry. The major compounds in the dichloromethane extract were alpha-pinene (23.73%), thymol methyl ether (17.32%), and camphor (10.12%). A fraction eluted with hexane contained alpha-pinene (44.24%) as the major constituent. A fraction eluted with ethyl ether had thymol methyl ether (22.27%) and camphor (19.65%) as the main components. Three samples prepared from the distillate and two additional samples prepared by petroleum ether and ethanol extraction directly from juniper berry fruits exhibited clear antioxidant activities with dose response in both 1,2-diphenyl picrylhydrazyl and beta-carotene assays. All samples except the hexane fraction showed comparable activities to that of the synthetic antioxidant t-butyl hydroquinone at a level of 200 microg/mL in the two testing systems. The extracts of dichloromethane, petroleum ether, and ethanol exhibited appreciable antimicrobial activities against six microorganisms with minimum inhibitory concentrations ranging from 0.5 mg/mL (volatile extract against Candida albicans ) to 1.2 mg/mL (ethanol extract against Aspergillus niger ). The results of the present study suggest that this fruit could be a natural antioxidant supplement for foods and beverages.     

超声波辅助碱分离毛竹半纤维素

该文以高效分离毛竹半纤维素为出发点,采用超声辅助碱分离法分离毛竹半纤维素。在固定固液比1∶20g/mL、总浸提时间120min的条件下,分析了KOH溶液质量分数,浸提温度及超声时间对毛竹半纤维素得率的影响。在单因素试验的基础上,采用Box-Behnken试验设计和通过响应面分析对分离工艺进行了优化。结果表明,超声辅助碱分离毛竹半纤维素的最佳分离工艺参数为KOH溶液质量分数3.1%、浸提温度54℃、超声时间56min,此时半纤维素实际总得率为19.28%。浸提温度和KOH溶液质量分数对半纤维素总得率影响显著,超声波作用时间对总得率影响不显著。在相同条件下超声辅助碱分离时半纤维素提取率比无超声辅助时提高4.06%。结果可为毛竹半纤维素分离的工业化提供参考。     

Thermal processing enhances the nutritional value of tomatoes by increasing total antioxidant activity

Processed fruits and vegetables have been long considered to have lower nutritional value than their fresh commodities due to the loss of vitamin C during processing. This research group found vitamin C in apples contributed < 0.4% of total antioxidant activity, indicating most of the activity comes from the natural combination of phytochemicals. This suggests that processed fruits and vegetables may retain their antioxidant activity despite the loss of vitamin C. Here it is shown that thermal processing elevated total antioxidant activity and bioaccessible lycopene content in tomatoes and produced no significant changes in the total phenolics and total flavonoids content, although loss of vitamin C was observed. The raw tomato had 0.76 +/- 0.03 micromol of vitamin C/g of tomato. After 2, 15, and 30 min of heating at 88 degrees C, the vitamin C content significantly dropped to 0.68 +/- 0.02, 0.64 +/- 0.01, and 0.54 +/- 0.02 micromol of vitamin C/g of tomato, respectively (p < 0.01). The raw tomato had 2.01 +/- 0.04 mg of trans-lycopene/g of tomato. After 2, 15, and 30 min of heating at 88 degrees C, the trans-lycopene content had increased to 3.11+/- 0.04, 5.45 +/- 0.02, and 5.32 +/- 0.05 mg of trans-lycopene/g of tomato (p < 0.01). The antioxidant activity of raw tomatoes was 4.13 +/- 0.36 micromol of vitamin C equiv/g of tomato. With heat treatment at 88 degrees C for 2, 15, and 30 min, the total antioxidant activity significantly increased to 5.29 +/- 0.26, 5.53 +/- 0.24, and 6.70 +/- 0.25 micromol of vitamin C equiv/g of tomato, respectively (p < 0.01). There were no significant changes in either total phenolics or total flavonoids. These findings indicate thermal processing enhanced the nutritional value of tomatoes by increasing the bioaccessible lycopene content and total antioxidant activity and are against the notion that processed fruits and vegetables have lower nutritional value than fresh produce. This information may have a significant impact on consumers' food selection by increasing their consumption of fruits and vegetables to reduce the risks of chronic diseases.     

Carotenoid absorption in humans consuming tomato sauces obtained from tangerine or high-beta-carotene varieties of tomatoes

Tomato sauces were produced from unique tomato varieties to study carotenoid absorption in humans. Tangerine tomatoes, high in cis-lycopene, especially prolycopene (7Z,9Z,7'Z,9'Z), and high-beta-carotene tomatoes as an alternative dietary source of beta-carotene were grown and processed. Sauces were served after 2 week washout periods and overnight fasting for breakfast to healthy subjects (n = 12, 6M/6F) in a randomized crossover design. The serving size was 150 g (containing 15 g of corn oil), tangerine sauce containing 13 mg of lycopene (97.0% as cis-isomers) and high-beta-carotene sauce containing 17 mg of total beta-carotene (1.6% as the 9-cis-isomer) and 4 mg of lycopene. Blood samples were collected 0, 2, 3, 4, 5, 6, 8, and 9.5 h following test meal consumption and carotenoids determined in the plasma triacylglycerol-rich lipoprotein fraction by HPLC-electrochemical detection. Baseline-corrected areas under the concentration vs time curves (AUC) were used as a measure of absorption. AUC0-9.5h values for total lycopene in the tangerine sauce group were 870 +/- 187 (nmol.h)/L (mean +/- SEM) with >99% as cis-isomers (59% as the tetra-cis-isomer). The AUC0-9.5h values for total beta-carotene and lycopene after consumption of the high-beta-carotene sauce were 304 +/- 54 (4% as 9-cis-carotene) and 118 +/- 24 (nmol.h)/L, respectively. Lycopene dose-adjusted triacylglycerol-rich lipoprotein AUC responses in the tangerine sauce group were relatively high when compared to those in the literature and the high-beta-carotene group. The results support the hypothesis that lycopene cis-isomers are highly bioavailable and suggest that special tomato varieties can be utilized to increase both the intake and bioavailability of health-beneficial carotenoids.     

菜籽蛋白加工废液中多酚和多糖同步提取工艺优化

为开发利用菜籽蛋白加工废液中的生理活性物质,该研究在单因素试验基础上,采用Box-Behnken响应面试验设计法,对菜籽蛋白加工废液中多酚和多糖提取工艺条件进行优化,同时探究两种物质的体外抗氧化活性。结果表明,影响菜籽蛋白加工废液中多酚和多糖得率的因素大小顺序为:乙醇体积分数浸提温度浸提时间,最佳提取工艺为:浸提温度60℃、乙醇体积分数65%、浸提时间31 min,在此条件下多酚得率为2.19%,多糖得率为8.14%;多酚提取物对DPPH·具有较强清除能力,其半抑制质量浓度为0.20 mg/mL,多糖提取物对DPPH·和·OH均具有较强的清除能力,其半抑制质量浓度分别为1.45、2.38 mg/mL;高效液相色谱法初步检测表明,菜籽蛋白加工废液中含有香豆酸、丁香酸、对香豆酸、芥子酸和苯甲酸。研究结果为菜籽蛋白加工废液的再利用提供参考。