Scots pine responses to elevated temperature and carbon dioxide concentration: growth and wood properties

Growth and wood properties of 20-year-old Scots pine (Pinus sylvestris L.) trees were studied for 6 years in 16 closed chambers providing a factorial combination of two temperature regimes (ambient and elevated) and two carbon dioxide concentrations ([CO2]) (ambient and twice ambient). The elevation of temperature corresponded to the predicted effect at the site of a doubling in atmospheric [CO2]. Annual height and radial growth and wood properties were analyzed during 1997-2002. Physical wood properties analyzed included early- and latewood widths and their proportions, intra-ring wood densities, early- and latewood density and mean fiber length. Chemical wood properties analyzed included concentrations of acetone-soluble extractives, lignin, cellulose and hemicellulose. There were no significant treatment effects on height growth during the 6-year study. Elevated [CO2] increased ring width by 66 and 47% at ambient and elevated temperatures, respectively. At ambient [CO2], elevated temperature increased ring width by 19%. Increased ring width in response to elevated [CO2] resulted from increases in both early- and latewood width; however, there was no effect of the treatments on early- and latewood proportions. Mean wood density, earlywood density and fiber length increased in response to elevated temperature. The chemical composition of wood was affected by elevated [CO2], which reduced the cellulose concentration, and by elevated temperature, which reduced the concentration of acetone-soluble extractives. Thus, over the 6-year period, radial growth was significantly increased by elevated [CO2], and some wood properties were significantly affected by elevated temperature or elevated [CO2], or both, indicating that climate change may affect the material properties of wood.     

Chemical composition of earlywood and latewood in Norway spruce heartwood,sapwood and transition zone wood

This study focused on the distribution of wood components along a cross section of a spruce stem. Thin samples of earlywood and latewood were analysed by special micro-scale analytical techniques. Heartwood contained significantly more lignin and less cellulose than sapwood. The total content of hemicelluloses was the same along the radial direction, but the distribution of sugar units differed. The amounts of arabinoglucuronoxylan and pectins were larger in the heartwood. The transition zone between heartwood and sapwood had a specific composition, with less lignin and lipophilic extractives than heartwood and sapwood. For earlywood and latewood, significant differences were found in the distribution of sugar units in hemicelluloses. Latewood contained clearly more galactoglucomannan than earlywood, and conversely less pectins. The lipophilic extractives were also less concentrated in the latewood.Abbreviations EW or E earlywood - LW or L latewood - HW heartwood - SW sapwood - TZ transition zone wood - A.R. annual ring - AcBr Acetyl bromide - Ara arabinose - Xyl xylose - Gal galactose - Glc glucose - Man mannose - Rha rhamnose - GlcA glucuronic acid - MGlcA 4-O-methyl-glucuronic acid - GalA galacturonic acid - o.d. oven dry     

日本落叶松无性系木材性质的遗传变异

对10个10年生日本落叶松无性系的木材基本密度、管胞参数进行了测定.结果表明:木材基本密度,早、晚材管胞宽度和早材长宽比无性系间差异显著;木材基本密度,早、晚材管胞长度,早晚材管胞宽度和早晚材长宽比径向变异模式相似,即从髓心向外以曲线形式不断增加,有时亦有起伏;早材从髓心向外以近似直线的形式缓慢增加,晚材从髓心向外以曲线形式增加,初期增加幅度较大,到一定年龄后趋于水平变化并略有波动;材质性状与树木年轮间的关系以对数方程、幂函数方程、指数方程拟合效果较好;除了晚材壁腔比和早材壁厚外,其它木材性质的重复力均在0.5以上,受中度或中度以上的遗传制约,按照20%的选择率,长宽比和晚材管胞长能获得较高的遗传增益.     

Reflection and transmission of visible light by sugi wood: effects of cellular structure and densification

Transmittance and reflectance of visible light by sugi wood (Cryptomeria japonica) were investigated in the longitudinal (L) and tangential (T) directions. Transmittance was the highest in the L direction and reflectance was the highest in the T direction, suggesting that structural anisotropy influences transmittance and reflectance. Intra-ring variations observed with a microspectrometer indicated that T transmittance was higher for latewood than for earlywood, but there was no such trend in for L transmittance in which the highest levels occurred near the annual ring boundaries, on either the earlywood or latewood side, and the lowest at the transition from earlywood to latewood. Dependence of L transmittance on wavelength also showed variations according to the intra-ring position. The increasing of transmittance of earlywood at wavelengths?<?500 nm with increasing wavelength was observed, but this was not confirmed for latewood because of absorption by lignin. These observations supported a previously published finding, which was based on measurements in the radial direction, that the number of internal cell wall reflections, rather than density, determines wood lightness. Indeed, in the L direction, most of the incident light passes through lumens in earlywood and through cell walls in latewood, while it is subjected to numerous internal reflections at the interface between lumens and cell walls. This was further confirmed by the transmittance of earlywood being greatly decreased by radial compression.     

Fibre morphological effects on mechano-sorptive creep

The increased creep rate of paper under load during moisture cycling conditions as compared to that at high constant humidity is a problem in the use of packaging materials. In order to investigate the influence of morphological factors of the fibres on the occurrence and magnitude of this phenomenon, i.e. the occurrence of mechano-sorptive creep, studies on wood fibres isolated from different parts of spruce wood were performed. Thus, creep properties were studied on earlywood and latewood fibres from both juvenile wood and mature wood. In general, latewood fibres showed a higher degree of mechano-sorptive creep than earlywood fibres, and mature wood showed a higher degree of mechano-sorptive creep than juvenile fibres. The difference in mechano-sorptive creep rate between different fibres was shown to be correlated to the differences in fibril angle. The smaller the fibril angle the higher was the mechano-sorptive creep ratio. It was suggested that at fibril angles approaching 45° wood fibres do not exhibit mechano-sorptive creep.     

Genetic parameters for early wood and latewood densities and development with increasing age in Scots pine

? Each annual ring in pines consists of earlywood and latewood with considerable difference in density and width. To get a better determination of the genetic regulation of total wood density in Scots pine (Pinus sylvestris L.), density and width of those ring sections were measured in annual ring numbers 12 to 21 of Scots pines in a full-sib progeny test. Tree height and stem diameter were also measured.

? Heritabilities for the annual ring sections increased with age for earlywood density from 0.08 to approximately 0.25; latewood density showed similar reductions. Heritability over all 10 annual rings was 0.25 for earlywood density, 0.22 for latewood density, 0.29 for height and 0.10 for stem diameter. Genetic correlations between earlywood and latewood density and growth traits were negative, while they were strongly positive between densities of adjacent annual rings (0.70–1.0).

? Despite the higher heritability of earlywood density, the strong positive genetic correlation between those traits indicates little benefit from focusing solely on earlywood density when selecting for wood density. Analysing earlywood and latewood separately does not benefit from including the width of the corresponding ring section as a covariate. Juvenile wood may possibly turn into mature wood 15–20 y from the pith.

     

Influence of growth rate on specific gravity and other selected properties of loblolly pine

Summary Forty lobiolly pine trees were studied for the purpose of finding a possible reason for the growth rate-specific gravity controversy. In addition, properties such as specific gravity of earlywood and latewood, latewood percentage, and their relations with growth rate and specific gravity of wood were investigated.The results show that, in general, significant relationship do exist between specific gravity and number of rings per inch for growth rates ranging from approximately 3...8 rings per inch. Specific gravity was generally unrelated with slower growth rates, i.e., more than 8 rings per inch.Specific gravity of specimens having the same number of rings per inch varied according to height-decreasing with increasing height. Latewood percentage was related to number of rings per inch in a similar manner as specific gravity. Within a tree, latewood percentage of wood having the same number of rings per inch decreased with increasing height.Negative relationships between earlywood specific gravity and number of rings per inch were found to be significant for the 30 percent height and for all heights when combined. However, there was no significant relationship between latewood specific gravity and number of rings per inch. Average laterwood specific gravity decreased with height. Earlywood specific gravity only decreased from 5.3...30 percent height levels and then showed an increase. In general, wood properties such as specific gravity and latewood percentage of wood, specific gravity of earlywood and latewood, varied more from breast height to approximately the 30 percent height, than between equal distances above the 30 percent height level.     

Effect of conditioning on distribution and availability of alkaline copper quat (ACQ) preservative components in earlywood and latewood of southern pine

The interactions of alkaline copper quat (ACQ) components with the earlywood and latewood tissues of southern pine were investigated. There was a highly significant redistribution of the copper amine component from the earlywood to the latewood during post-treatment fixation at 50°C, which was mainly attributed to diffusion of copper amine from the earlywood into the latewood. A small amount of copper amine redistributed between the tissues and toward the wood surfaces during drying following fixation. The redistribution within the wood was similar whether the preservative penetrated longitudinally, tangentially, or radially into the wood during pressure treatment. This redistribution resulted in lower solubility of copper, and this effect contributes to the overall copper fixation in ACQ-treated wood. The quat component did not significantly diffuse after treatment, and its concentration remained much higher in the earlywood compared to the latewood.     

Fibril angle of loblolly pine wood as related to specific gravity,growth rate,and distance from pith

Summary Fibril angles were greater for earlywood (avg. 33.4°) than for latewood tracheids (avg. 26.9°). For earlywood, fibril angle did not differ between growth rates when the specific gravity was low (avg. 33.3°). When the specific gravity was high, wood of fast growth had a higher fibril angle (avg. 35.1°) than wood of slow growth (avg. 32.0°). No differences were detected between core, middle, and outer wood. In latewood tracheids, fibril angles were greater in corewood (avg. 28.0°) than in middle or outer wood (avg. 26.3°). For whole wood (a weighted average of earlywood and latewood), fibril angle averaged 30.7° and was greater in corewood (avg. 32.2°) than in middle or outer wood (avg. 29.9°).     

Control of tracheid cross-sectional dimensions in Norway spruce and Scots pine wood raw material

Abstract

Wood properties, including tracheid cross-sectional dimensions, show a large degree of variation. To improve the properties of products made from wood, different methods to control variation have been developed. This study aims to determine the theoretical efficiency of three control strategies: the fractionation of pulped tracheids into earlywood and latewood, the separation of juvenile and mature wood, and sorting of logs according to tree size. The efficiency of each method was studied by first constructing virtual trees from measured tracheid cross-sectional dimensions, then simulating the efficiency of above-mentioned methods. The tracheid dimension data include Norway spruce (Picea abies (L.) Karst.) and Scots pine (Pinus sylvestris L.). The simulations show that separation into earlywood and latewood classes has the highest theoretical efficiency and yields the lowest variances in raw material. Classification into juvenile and mature wood groups is the second most efficient method, and the sorting of logs according to the size class of the tree is the least efficient method. It was also concluded that the variation in cell-wall thickness and radial diameter mainly originates from differences between earlywood and latewood, whereas the variation in tangential diameter mainly originates from differences between mature and juvenile wood.     

Age trends in the genetic parameters of wood density and the relationship with growth rates in hybrid larch (Larix gmelinii var. japonica × L. kaempferi) F1

Age trends in variance components and heritability of overall wood density, earlywood and latewood density, and latewood proportion were investigated in 29-year-old trees of 19 full-sib families of hybrid larch (Larix gmelinii var. japonica × Larix kaempferi) F₁. The age–age correlation and optimum selection age for these traits were also estimated and genetic and phenotypic correlations between wood density and radial growth rate were calculated for each growth ring. Intraring wood density data were obtained using X-ray densitometry. The coefficient of additive genetic variance was stable over all ages, whereas the coefficient of environmental variances gradually decreased with increasing age, resulting in increases in heritability estimates with age for overall density. The latewood proportion had the highest heritability estimates at all ages, ranging from 0.44 to 0.66. Overall density and its various components at 28 years of age showed strong genetic correlations with their respective traits at all younger ages. Optimum selection ages for the wood density traits ranged from 8 to 14 years, at which point maximum gain efficiencies per year were obtained. There were negative correlations between wood density and radial growth rate at early ages, although these relationships tended to be weaker with increasing age. These results suggest that selection at a young age is effective for wood density, but particular care must be taken in selecting trees with an improved radial growth rate because rapid growth will result in a low-density wood product, especially in the early growth period.     

日本落叶松无性系微纤丝角遗传变异的研究

对10个10年生日本落叶松无性系的早材和晚材微纤丝角进行了测定,结果表明:早、晚材微纤丝角无性系间差异极显著,同一年轮内早材微纤丝角大于晚材.日本落叶松微纤丝角的径向变异规律为:在髓心处最大,以后逐渐减小.早、晚材微纤丝角与树木年轮间的变异模式(径向变异)以对数和乘幂式方程拟合效果较好,R2(R为相关系数)均在0.8以上.早、晚材微纤丝角同树高、形率、树皮厚度、主枝粗、枝干比、主枝夹角、主枝长的相关关系不显著,早、晚材微纤丝角同胸径、冠幅的相关关系达到显著水平;早材与晚材的微纤丝角也相关显著.早材和晚材的微纤丝角受中到强度遗传控制,广义遗传力分别为0.767 4、0.804 3.按照20%的选择率,早材和晚材的微纤丝角的遗传增益分别为21.82%和29.75%.     

Quantitative analysis of lignin using an UV microscopic image analyser. variation within one growth increment

Summary The variation of the lignin content within one growth increment of Abies sachalinensis was investigated with the aid of an ultraviolet microscopic image analyser. The lignin content was determined continuously in each cell within a growth increment. The direct photometric scanning method of UV image is believed to give accurate results for determination of the lignin content of the cell wall, since it contains fewer assumptions. The lignin content of the earlywood was higher than that of latewood in adult wood as same as the others. It was high, however, in the terminal zone of the latewood. The trends of the juvenile wood were quite different from those of the adult wood. The lignin content increased from earlywood to latewood.This paper was presented at the Wood Anatomy Congress of IAWA, Aug. 27, 1979, Amsterdam. The authors wish to express their gratitude to Prof. Dr. J. Bauch for helpful advice     

Statics and kinetics of water vapor sorption of small loblolly pine samples

A better understanding of the sorption behavior of different wood structures could be useful in protecting wood against wood deterioration and fungal attack. The purpose of this study was to investigate the effect of differences among earlywood, latewood, and tree ring location within the stem cross-section of loblolly pine (Pinus taeda) on the sorption kinetics and statics of water vapor under ambient conditions. The water vapor sorption of earlywood and latewood in different tree rings was recorded using a dynamic contact angle analyzer under relative humidity changes from 11 to 89%, as provided by saturated salt solutions. Earlywood had higher sorption rates and diffusion coefficients than latewood, while outer tree rings had higher sorption rates and diffusion coefficients than inner tree rings. The sorption isotherms of earlywood, latewood, and different tree ring locations within the stem cross-section were fitted very well by a Hailwood–Horrobin model.     

Relationships of climate and cell features in stems and roots of black spruce and balsam fir

? The anatomical differences of mature black spruces and balsam firs were examined at stem and root level in order to characterize their wood properties at cellular level and link these differences to climate.

? Anatomical variability of these species was evaluated in relation to climate data gathered from 2001 to 2004 during the cell enlargement (CE) and wall thickening and lignification (WTL) phases. Lumen area, single cell wall thickness and total tracheid radial diameter were analyzed and regrouped into earlywood and latewood.

? Results from a principal component analysis (PCA) indicated that both first eigenvectors account for 82% and 90% of total variance for CE and WTL respectively. These component factors revealed that precipitation, humidity and number of days with precipitation significantly influence the lumen area (p = 0.0168) and radial cell diameter (p = 0.0222) in earlywood. Significant differences were registered between species and tree parts (stem and root) for the lumen area, radial cell diameter and cell wall thickness in both earlywood and latewood.

? In our study, black spruce exhibited smaller tracheid size in both stem and roots compared to balsam fir. Furthermore, the lower amount of tracheids produced during the growing season and higher proportion of latewood ensure a higher wood density of black spruce. The influence of temperature on earlywood formation is significant, whereas no influence was observed on latewood.

     

Effects of radial growth rate on selected indices for juvenile and mature wood of the Japanese larch

To examine the differences between juvenile and mature wood, 12 aged sample trees from two areas of Nagano Prefecture were harvested; and the radial development of tracheid length, the ring density, and the relation of the radial growth rate (observed by ring width) with some selected indices of ring structure were investigated. The results proved that the radial variation of tracheid length with ring number can be described by a logarithmic formula, and both plantations reached the demarcation of juvenile and mature wood at age 18. With the segmented regression method, we also analyzed radial variation of mean density and found that the demarcation of juvenile and mature wood was at age 15 for sample trees from Saku and at age 21 for those from Yabuhara. By using the results of estimates from juvenile and mature wood based on ring density, we found that high growth rates resulted when producing lower-density wood during the juvenile period, but these rates did not occur during the mature period. The basic reason for this phenomenon is the variation in patterns of earlywood and latewood in juvenile and mature wood, respectively. This result advised us that when managing plantations of Japanese larch it is necessary to take different measurements at different growth periods.     

I-69杨年轮宽度和密度变异规律

以I-69杨木材为试样,运用树木年轮图像分析系统和树木年轮分析系统获取年轮宽度和年轮密度数据,并对组成成分径向变异和轴向变异规律进行了分析.结果表明:I-69杨木材密度的径向变异规律随树龄增加而增大,最大密度波动较大,最小密度随树龄增加总体趋势下降,早材密度、晚材密度随树龄增加而增加;年轮组成成分各项指标株内径向变异极...     

木材材性株内径向变异模式初探VI19个杉木种源木材密度径向变异模式的研究

以微密度分析对19个种源杉木的木材密度径向变异模式进行了研究.不同种源间和种源内株间,年轮平均密度的径向变异曲线都存在一定的变异,但此变异主要表现在种源内株间.年轮平均密度的幼龄-成熟相关性从第3年起就极显著.由微密度分析得出的一系列密度和年轮宽特征值间的相关分析表明,在年龄影响下的变异过程中,年轮内密度变异曲线随年轮宽的变动导致晚材率变动的效应较为显著,年轮平均密度主要受晚材率影响;年轮平均密度与年轮宽呈特别显著的负相关.而在种源影响下的变异过程中分析,上述效应不明显,而不同种源间密度变异曲线的上下移动影响显著;年轮平均密度主要受早材平均密度影响;年轮平均密度与年轮宽的负相关远不如在年龄影响下的变异过程中显著.     

Intra-increment variation in specific gravity of wood in blue pine

Summary Intra-increment variation in specific gravity of wood is studied in relation to the types of annual increments in Pinus wallichiana. In the normal annual increments specific gravity increases almost linearly across the ring, displaying minimum value in the first-formed earlywood and maximum value in the last-formed latewood. The occurrence of false rings and that of compression wood in an annual ring causes a localized increase in specific gravity. The change in specific gravity at the false growth ring boundary is slight and gradual, whereas at the true annual rings boundary the change is steep and abrupt. The specific gravity in the first-formed earlywood portion gives the most consistent value as compared to whole earlywood, whole latewood and whole ring when studied around the circumference.The financial support from University Grants Commission (India) is gratefully acknowledged     

Genetic control of intra-ring wood density variation in hybrid larch (Larix gmelinii var. japonica × L. kaempferi) F1

Genetic parameters for various wood density traits were estimated in 29-year-old trees of 18 full-sib families of hybrid larch (Larix gmelinii var. japonica × Larix kaempferi) F₁. Intra-ring density variation (IDV) was also evaluated using a model that expresses the pattern curve from earlywood to latewood as a power function. A high IDV indicates an abrupt change in wood density from earlywood to latewood. The ring width and wood density traits of individual rings were determined by X-ray densitometry. Overall wood density (RD) was shown to increase with increasing ring number, ranging from 0.42–0.59 g/cm³, whereas IDV of individual rings decreased gradually from pith outwards. Estimates of individual tree narrow-sense heritability of RD and IDV were 0.66 and 0.67, respectively. IDV showed negative genetic and phenotypic correlations with RD (r _g = −0.99, r _p = −0.72). The predicted genetic gains in latewood proportion and IDV were higher than that of RD. These results suggest that the intra-ring density variation is under moderate genetic control equivalent to wood density. The trend of increasing wood density from earlywood to latewood was associated with changes in both tracheid diameter and cell wall thickness.