| 硬质合金刀片切削力控制器的设计及仿真 |
| |
| 引用本文： | 吴明阳,孟庆鑫,高东宇,文东辉,刘献礼.硬质合金刀片切削力控制器的设计及仿真[J].东北林业大学学报,2007,35(2):86-87. |
| |
| 作者姓名： | 吴明阳 孟庆鑫 高东宇 文东辉 刘献礼 |
| |
| 作者单位： | 1. 哈尔滨工程大学,哈尔滨,150001
2. 哈尔滨理工大学 |
| |
| 基金项目： | 国家自然科学基金
,
黑龙江省教育厅海外学人科研(合作)基金
,
黑龙江省哈尔滨市青年科学基金 |
| |
| 摘 要： | 针对硬态切削条件下的切削力控制问题,建立了控制模型,使用MATLAB/SIMULINK设计了PID/PD控制器,对径向力的控制效果进行了仿真。结果表明:通过调节进给量能够有效地控制径向切削力变化,同时,能够较好地控制刀具的磨损速率。
|
| 关 键 词： | 硬态切削 切削力控制 MATLAB PID/PD |
| 修稿时间： | 2006-09-05 |
Design and Simulation of Cutting Force Controller for Cemented Carbide Tips |
| |
| Wu Mingyang,Meng Qingxin,Gao Dongyu,Wen Donghui,Liu Xianli.Design and Simulation of Cutting Force Controller for Cemented Carbide Tips[J].Journal of Northeast Forestry University,2007,35(2):86-87. |
| |
| Authors: | Wu Mingyang Meng Qingxin Gao Dongyu Wen Donghui Liu Xianli |
| |
| Institution: | School of Mechanical and Electrical Engineering, Harbin Engineering University, Harbin 150001, P. R. China;Harbin University of Science and Technology |
| |
| Abstract: | A controlling model for cutting force during hard cutting was established.A PID/PD controller was designed using MATLAB/SIMULINK,and the controlling effect of radial force was simulated.Result indicates that the change of cutting force in radial and the wear rate of the tool can be controlled effectively by adjusting feed rates. |
| |
| Keywords: | Hard cutting Cutting force control MATLAB PID/PD |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
