砼结构开裂原因分析及预防

该文简要说明了产生砼结构开裂原因及预防方法，分析了一些施工工艺技术引起的结构开裂因素及控制措施。     

利用RAPD标记评价桃种间杂交一代群体的分离方式

以毛桃2-7(Prunus persica)、山桃白山碧桃(Prunus davidiana)以及两者的F_1代为试材,对RAPD标记的分离方式进行分析。结果表明,RAPD标记在F_1代呈3种分离方式:孟德尔分离、偏离孟德尔分离规律、异常分离。3种分离位点出现的频率和数量分别为:80%、240,14%、42,6%、18。呈孟德尔分离的情况有:不分离、1:1分离和3:1分离,其中不分离的频率为64％。并对偏离孟德尔分离比例和异常分离的RAPD标记进行分析。其研究结果可为该群体是否适合构建遗传连锁图谱进行评价及进一步利用该群体奠定良好基础。     

杜洛克与二花脸杂交猪群体SNP偏分离分析

偏分离（TRD）是生物中普遍存在的现象,本研究拟在高密度基因芯片判断基因型的大规模群体中挖掘猪基因组标记位点的偏分离位点并探究其潜在的遗传机制。本研究用60K Illumina Porcine SNP芯片对1 020头F2资源家系（杜洛克与二花脸杂交F0-F2群体）进行基因型分型,用偏分离分析软件TRDscan （BF>100）和TDT （P<0.01）方法在单个位点上检测偏分离信号,并对二者共有的显著信号位点附近100 kb窗口的基因进行功能分析。此外,本研究还利用单倍型分型的软件包PHASEBOOK采用多位点连锁分析的策略分析了父源和母源配子中的偏分离区域,并在该区域内搜寻潜在的QTLs。结果表明：1）在单位点的偏分离分析中共鉴定到44个显著的偏分离位点,筛选到23个相关基因;对父本和母本特异性偏分离效应进行分析时,分别鉴定到27和35个显著偏分离位点,其中,分别有11和25个位点的100 kb附近有已注释的功能基因。2）基于单倍型多位点连锁的偏分离结果显示,父本显著偏分离位点位于5和13号染色体上,在该偏分离区域内搜寻功能相关的QTL,共搜寻到3个与繁殖性状（木乃伊数、产活仔数、黄体数）有关的QTLs;分析母本偏分离位点时,在4、6和12号染色体上定位到显著偏分离区域,结合已知的猪QTL数据库,共找到了5个与繁殖性状相关的QTLs。本研究利用大规模猪家系数据系统地鉴别了猪基因组的偏分离位点,为解析猪中的偏分离现象和进一步探究其生物学机制提供了一定的参考作用。     

Genome-wide search for segregation distortion loci associated with the expression of complex traits in Populus tomentosa

Segregation distortion of molecular markers has been reported in a broad range of organisms. It has been detected in an interspecific BC1 Populus pedigree established by controlled crossing between clone “LM50” (Populus tomentosa) and its hybrid clone “TB01” (P. tomentosa×P. bolleana). The study with a total of 150 AFLP markers (approximately 18.9% of the total loci) exhibited significant deviation from the Mendelian ratio (1:1) (p<0.01). Twenty-five percent of the markers were mapped on the pa-rental specific genetic linkage maps of clones “LM50” and “TB01” with a pseudo-test-cross mapping strategy. Twelve linkage groups had markers with skewed segregation ratios, but the major regions were on linkage groups TLG2, TLG4 and TLG6 in the linkage map of clone “LM50”. We also analyzed the association between distorted loci and expression of complex traits with Map-maker/QTL software. A total of 16 putative QTLs affecting 12 traits were identified in the distorted regions on seven linkage groups. Therefore we could detect the distribution of skewed loci along the entire genome and identify the association between quantitative traits and segregation loci via genetic mapping in an interspecific BC1 P. tomentosa family. Furthermore, the genetic nature and pos-sible causes of these segregation distortions for differentiation between female and male parents were also discussed.     

谈砖砌体裂缝原因及其防治

分析了砖砌体裂缝的三种原因:即温差变形引发的、地基基础不均匀沉降引起的及特殊砌体材料产生的裂缝;并阐明了防治裂缝的对策.     

我国会计信息失真成因及其制度建设

会计信息失真不仅是困扰会计界多年的问题,而且是社会各界广泛关注的问题。导致会计信息失真的原因比较复杂。文章从会计准则及制度、产权制度、公司治理结构制度等方面对会计信息失真的成因进行了分析,寻求治理会计信息失真的防治对策。     

基于Maize6H-60K芯片精准分型的玉米DH群体遗传规律研究

为解析玉米双单倍体(doubled haploid,DH)群体的遗传规律,使用自主研发的精准分型策略对‘先玉335’DH群体的Maize6H-60K芯片结果进行筛选校正和解析。结果表明:1)通过剔除单态、杂合、缺失标记,使用精准分型策略对标记准确聚类,获得的18 947个SNPs标记覆盖玉米全基因组。2)该群体在10条染色体上平均交换次数为1.84~1.03次,在6号染色体随体区域的交换次数显著减少。3)该群体在1、2、3、8号染色体上存在明显的偏分离现象;通过高频次、高密度的交换,染色体两臂端粒区域理论分离系数表现出回归到50%的趋势。利用获得的重组交换及分离规律可提高从DH群体中筛选到预期育种材料的准确性。     

白菜基因组导入芥菜的远缘杂交及后代分离偏向性

【目的】研究远缘杂交将结球白菜的A基因组导入包心芥菜,利用高分辨率熔解曲线(high-resolution melting, HRM)结合InDel标记辅助选择技术,筛选出保留白菜基因较多的回交后代,改良包心芥的结球性,丰富包心芥菜的种质资源。【方法】利用幼胚培养技术辅助6份包心芥菜与2份结球白菜进行远缘杂交和回交,选取20个InDel标记追踪白菜A基因组全部染色体,从192的BC₁单株中筛选出白菜A基因组标记占比较高的单株。田间调查筛选结球性近似结球白菜的单株。【结果】远缘杂交结合幼胚培养获得了9个种间杂种组合和14个BC₁群体。筛选并获得203个在全基因组分布均匀的可区分白菜与芥菜的HRM-InDel标记;利用20个InDel标记追踪192株BC₁单株的白菜基因,分离群体偏向传递白菜基因组,有54棵单株标记含量超过90%。【结论】幼胚培养技术可提高白菜与芥菜远缘杂交后回交的结实率,并可加快育种进程;筛选出了白菜基因组占比较高的组合和单株;分离群体明显偏向于传递白菜基因。     

木塑复合材料热变形温度研究

以现有木塑工厂生产配方为基础,通过改进配方,采用熔融共混方法对木塑复合材料的耐热性进行研究.结果表明:在原有木塑厂生产配方基础上,基体树脂聚乙烯回料用量减少15％,同时添加10％的共聚型聚丙烯新料和5％玻纤,工业化放大生产制得的木塑复合材料热变形温度从61℃提高到99℃;弯曲强度从25 MPa提高到32 MPa;冲击强度从3.5 kJ/m2提高到3.7 kJ/m2,且生产成本并未明显提高.     

Detecting and estimating segregation distortion and linkage between glufosinate tolerance and blackleg resistance in Brassica napus L.

Summary The segregation and linkage between glufosinate (transgenes ‘Rf3’ and ‘T177’) and blackleg resistance genes in canola (Brassica napus L.) were assessed using F₁ microspore-derived doubled haploid (DH) populations from four crosses including reciprocals, two involving the transgene ‘Rf3’ and the other two involving the transgene ‘T177’. To relax the assumption of no segregation distortion required for the conventional analysis of segregation and linkage, we employed Bailey's analysis that allows detecting segregation distortion at linked loci. The significant departures from the 1:1 segregation were detected in the crosses involving the transgene ‘T177’ but not in the crosses involving the transgene ‘Rf3’. The apparent deficit of the herbicide tolerant DH lines in the crosses with the transgene ‘T177’ is likely due to differential selection against the gametes carrying ‘T177’ during microspore culture. The linkage was strong between blackleg resistance and the transgene ‘Rf3’ but weak or absent between blackleg resistance and the transgene ‘T177’, suggesting that the two transgenes are probably inserted into distant regions of the genome. The observed linkage offers an opportunity to develop new canola cultivars with both glufosinate tolerance conferred by transgene ‘Rf3’ and blackleg resistance.