Utilizing a DUALEM‐421 and inversion modelling to map baseline soil salinity along toposequences in the Hunter Valley Wine district

In the oldest commercial wine district of Australia, the Hunter Valley, there is the threat of soil salinization because marine sediments underlie the area. To understand the risk requires information about the spatial distribution of soil properties. Electromagnetic (EM) induction instruments have been used to identify and map the spatial variation of average soil salinity to a certain depth. However, soils vary with depth dependent on soil forming factors. We collected data from a single‐frequency and multiple‐coil DUALEM‐421 along a toposequence. We inverted this data using EM4Soil software and evaluated the resultant 2‐dimensional model of true electrical conductivity (σ – mS/m) with depth against electrical conductivity of saturated soil pastes (EC_p – dS/m). Using a fitted linear regression (LR) model calibration approach and by varying the forward model (cumulative function‐CF and full solution‐FS), inversion algorithm (S1 and S2), damping factor (λ) and number of arrays, we determined a suitable electromagnetic conductivity image (EMCI), which was optimal (R² = 0.82) when using the full solution, S2, λ = 3.6 and all six coil arrays. We conducted an uncertainty analysis of the LR model used to estimate the electrical conductivity of the saturated soil‐paste extract (EC_e – dS/m). Our interpretation based on estimates of EC_e suggests the approach can identify differences in salinity, how these vary with parent material and how topography influences salt distribution. The results provide information leading to insights into how soil forming factors and agricultural practices influence salinity down a toposequence and how this can guide soil management practices.     

旱地棉花主要促控措施的产量效应分析

本文根据三年试验结果所建立的数学模型,结合4—9月份的不同降雨量条件,对旱地棉花增加种植密度以后各种促控措施(施(?)量、施磷量、打顶日期、化控日期)的合理定量进行了分析。结果认为:早地棉花的高产栽培方案应以种植密度和磷肥的合理定量为基本內容,氮肥、打顶和化控作为依据天气情况和苗情酌情实施的调节措施。最后,依据试验结果,对方案的可行性及优点进行了讨论。     

双斜立式油缸木材抓具优化设计研究

通过对现行木材生产中所使用的双斜立式油缸木材抓具的受力情况的深入分析。推导了双斜立式油缸木材抓具在两种不同的工作状态下的抓取力计算公式。在此基础上,结合现代先进的设计方法——优化设计法的基本思想,建立了该类型木材抓具优化设计的数学模型。根据数学模型的特点,给出了能够处理约束优化问题的优化计算方法——内点惩罚函数法,编制了该方法的计算机程序,并对程序的使用进行了必要的说明。     

Seed production of Chenopodium album in competition with field vegetables

Total weed control within a crop is both difficult and expensive to achieve, so that some weeds will often remain to set seed. The seed production resulting from these weeds will ultimately affect the sustainability of the weed control strategy. If too much is allowed to return each season there could be a gradual, but significant, increase in the potential weed flora over a number of seasons. Field trials were carried out in 2000 and 2001 to quantify the potential magnitude of this weed seed return from Chenopodium album L., grown at two planting densities either in pure stands or in competition with one of two crops (cabbage or onion). Crop and weed weights and weed seed production were notably greater in 2001. Both dry weight and seed production of C. album were suppressed by increasing planting density or by the presence of crop, with cabbage having a more suppressive effect. Despite the plasticity in seed production, a linear relationship was demonstrated between log weed seed production and log weed biomass that was robust over a range of competitive situations with onion and cabbage, at different planting densities and in growing seasons. The study also demonstrated that the relationship could be combined with an existing simple competition model to allow the consequences of incomplete weed control to be assessed in terms of potential weed seed return.     

Body weight growth Model of Datong Yak in Qinghai

Summary:This study was conducted to develop a suitable model for describing the growth pattern of the yak. The data used consisted of body weight records of 76 growing yak aged between 5 to 37 months. Three mathematical models were applied to describe the growth curves during this development period:①Y1=20.105 + 11. 250x-0. 526x2 ;used for describing the growth curve of yak aged 5 to 13 months;②Y2 = -359.687 + 49. 977x - 1. 249x2 ;used for animals aged 13 to 25 months;and ③Y3 = -833. 339 + 63. 772x - 1. 019x2 ;used for animals aged 25 to 37 months.     

Enhancing pedotransfer functions with environmental data for estimating bulk density and effective cation exchange capacity in a data‐sparse situation

Soil bulk density (BD) and effective cation exchange capacity (ECEC) are among the most important soil properties required for crop growth and environmental management. This study aimed to explore the combination of soil and environmental data in developing pedotransfer functions (PTFs) for BD and ECEC. Multiple linear regression (MLR) and random forest model (RFM) were employed in developing PTFs using three different data sets: soil data (PTF‐1), environmental data (PTF‐2) and the combination of soil and environmental data (PTF‐3). In developing the PTFs, three depth increments were also considered: all depth, topsoil (<0.40 m) and subsoil (>0.40 m). Results showed that PTF‐3 (R²; 0.29–0.69) outperformed both PTF‐1 (R²; 0.11–0.18) and PTF‐2 (R²; 0.22–0.59) in BD estimation. However, for ECEC estimation, PTF‐3 (R²; 0.61–0.86) performed comparably as PTF‐1 (R²; 0.58–0.76) with both PTFs out‐performing PTF‐2 (R²; 0.30–0.71). Also, grouping of data into different soil depth increments improves the estimation of BD with PTFs (especially PTF‐2 and PTF‐3) performing better at subsoils than topsoils. Generally, the most important predictors of BD are sand, silt, elevation, rainfall, temperature for estimation at topsoil while EVI, elevation, temperature and clay are the most important BD predictors in the subsoil. Also, clay, sand, pH, rainfall and SOC are the most important predictors of ECEC in the topsoil while pH, sand, clay, temperature and rainfall are the most important predictors of ECEC in the subsoil. Findings are important for overcoming the challenges of building national soil databases for large‐scale modelling in most data‐sparse countries, especially in the sub‐Saharan Africa (SSA).     

Movement rules for juvenile steelhead: dynamic linking of movement behaviour to habitat and density

We incorporated explanatory factors including stream habitat type and fish density into individual‐based models with dynamic connections among adjacent habitat units to infer dispersal behaviour of juvenile steelhead Oncorhynchus mykiss in a Great Lakes watershed. We used mark–recapture data and an inverse modelling approach to estimate daily probability of steelhead moving out of a habitat unit, P(move), according to four competing models. The models used included (i) a null model where all fish had equal movement probability; (ii) a habitat‐dependent model where P(move) depended on the habitat type; (iii) a density‐dependent model of P(move); and (iv) a model where P(move) depended on both density and habitat type. The habitat‐dependent model provided the most parsimonious fit to the observed data according to Akaike's information criteria (AICc). In the null model, P(move) averaged 0.70, whereas P(move) averaged 0.75 in pools, 0.68 in riffles and 0.73 in runs in the habitat‐dependent model.     

SALTIRSOIL: a simulation model for the mid to long‐term prediction of soil salinity in irrigated agriculture

The SALTIRSOIL model predicts soil salinity, sodicity and alkalinity in irrigated land using basic information on soil, climate, crop, irrigation management and water quality. It extends the concept of the WATSUIT model to include irrigation and crop management practices, advances in the calculation of evapotranspiration and new algorithms for the water stress coefficient and calculation of electrical conductivity. SALTIRSOIL calculates the soil water balance and soil solution concentration over the year. A second module, SALSOLCHEM, calculates the inorganic ion composition of the soil solution at equilibrium with soil calcite and gypsum at the soil’s CO₂ partial pressure. Results from comparing predicted and experimentally determined concentrations, observations and predictions of pH, alkalinity and calcium concentration in calcite‐saturated solutions agree to the second significant figure; in gypsum‐saturated solutions the standard difference between observations and predictions is <3% in absolute values. The algorithms in SALTIRSOIL have been verified and SALSOLCHEM validated for the reliable calculation of soil salinity, sodicity and alkalinity at water saturation in well‐drained irrigated lands. In simulations for horticultural crops in southeast Spain, soil solution concentration factors at water saturation, quotients of electrical conductivity (EC₂₅) at saturation to electrical conductivity in the irrigation water, and quotients of sodium adsorption ratio (SAR) are very similar to average measured values for the area.     

Drought Tolerance and Water‐Use Efficiency of Biogas Crops: A Comparison of Cup Plant,Maize and Lucerne‐Grass

The cup plant (Silphium perfoliatum L.) is discussed as an alternative energy crop for biogas production in Germany due to its ecological benefits over continuously grown maize. Moreover, a certain drought tolerance is assumed because of its intensive root growth and the dew water collection by the leaf cups, formed by fused leaf pairs. Therefore, the aim of this study was to estimate evapotranspiration (ET ), water‐use efficiency (WUE ) and the relevance of the leaf cups for the cup plant's water balance in a 2‐year field experiment. Parallel investigations were conducted for the two reference crops maize (high WUE ) and lucerne‐grass (deep and intensive rooting) under rainfed and irrigated conditions. Root system performance was assessed by measuring water depletion at various soil depths. Transpiration‐use efficiency (TUE ) was estimated using a model approach. Averaged over the 2 years, drought‐related above‐ground dry matter reduction was higher for the cup plant (33 %) than for the maize (18 %) and lucerne‐grass (14 %). The WUE of the cup plant (33 kg ha^?1 mm^?1) was significantly lower than for maize (50 kg ha^?1 mm^?1). The cup plant had a lower water uptake capacity than lucerne‐grass. Cup plant dry matter yields as high as those of maize will only be attainable at sites that are well supplied with water, be it through a large soil water reserve, groundwater connection, high rainfall or supplemental irrigation.     

Intracranial arteries of New Zealand rabbits; identification,three-dimensional modelling,and morphometry by computed tomography angiography

The aim of the study was to determine identification, three-dimensional modelling, and morphometry of intracranial arteries in New Zealand Rabbit by using computed tomography angiography. A total of 20 adult New Zealand Rabbits from both sexes were used in the study. General anaesthesia procedure was followed before computed tomography angiography imaging. Rabbits were placed in a prone position for imaging. Computed tomography angiography imaging was performed by injecting contrast agent into vena auricularis marginalis of rabbits. Morphometric measurements of the specified points were taken by MIMICS program using the computed tomography angiography images acquired. Three-dimensional intracranial artery model was prepared from the two-dimensional images on the same program. Measurements were statistically compared in terms of sex and side. It was observed in the study that arteria basilaris was generated by bilateral arteria vertebralis at the basal level of medulla oblongata. In the study, a statistically significant difference was determined only in diameter values of arteria cerebri caudalis dextra et sinistra in both female and male rabbits. On the other hand, no statistically significant difference was determined with respect to the side. Consequently, we think that the data of the present study will contribute to further studies on cerebrovascular pathology, clinicians or researchers.