Quantitative capillary reversed passive latex agglutination test for C-reactive protein (CRP) in the dog

A capillary reversed passive latex agglutination test (capillary RPLA) was developed which allows quantification of serum C-reactive protein (CRP) within approximately 15 min. The logarithmic regression line (calibration curve) obtained after measuring each CRP concentration three times in twofold dilutions of a standard canine serum containing 222 g/ml of CRP was y=6.394+0.030x (r=0.995). Capillary RPLA permitted quantification of CRP in the range 6.9–222 g/ml. The coefficients of variation ranged from 10.28% to 12.40%. The recovery rates (percentage recovery) of CRP by capillary RPLA were within the range 87% to 106%. On measuring the CRP concentrations in sera from 78 dogs by capillary RPLA, single radial immunodiffusion (SRID) and enzyme-linked immunosorbent assay (ELISA), close correlations were demonstrated between SRID and capillary RPLA (y=7.250+1.109x, r=0.978), between SRID and ELISA (y=3.042+1.059x, r=0.967), and between capillary RPLA and ELISA (y=1.778+0.929x, r=0.962). Capillary RPLA may be considered useful as a routine biochemical technique for measurement of serum CRP concentration in the dog.Abbreviations CRP C-reactive protein - ELISA enzyme-linked immunosorbent assay - RPLA reversed passive latex agglutination test - SRID single radial immunodiffusion     

叶片开缝对单叶片泵径向力的影响

为了改善单叶片泵的运行特性,降低径向受力不均匀性,采用数值计算与试验相结合的方法分析了单叶片离心泵径向力的动态特性.研究了3个不同流量工况(0.6Q_d,1.0Q_d和1.4Q_d)下径向力的变化规律,结果表明,单叶片离心泵叶轮叶片工作面与背面所受压差是径向力产生的主要原因,并在小流量工况下径向力达到最值.通过对试验与数值模拟结果的分析对比,提出了平衡单叶片泵径向力的新方法-叶片开缝,并在叶片包角方向上选取3个不同位置(0°,90°和270°)布置宽度为1.0 mm的缝隙,分析了不同开缝位置对径向力及泵外特性的影响情况.结果表明:当在叶片尾缘开缝时,对泵的外特性影响较小,并可以较大降低单叶片离心泵叶片工作面和背面的压差,减小叶轮径向受力情况,提高单叶片泵的可靠性和使用寿命.     

蜗壳断面面积变化规律对双吸离心泵水力性能的影响

针对某泵站S700-500-730型双吸离心泵运行时引发的断轴问题,采用CFD数值模拟方法,通过与蜗壳断面面积线性变化规律(以下简称L-规律)进行对比,分析了原型泵采用的蜗壳断面面积变化规律(以下简称Y-规律)对水力性能以及径向力的影响.结果表明:在定常工况下,2种规律的双吸离心泵在设计工况下水力性能相近,相较于L-规律方案,采用Y-规律设计的蜗壳作用在叶轮上的径向力增大高达24.77%;在非设计工况下,相较于L-规律方案,采用Y-规律设计的蜗壳水力性能更加优越,但是作用在叶轮上的径向力要高于采用L-规律方案时作用在叶轮上的径向力;在非定常工况下,Y-规律方案的脉动幅值以及高频脉动都要比采用L-规律方案设计时明显得多.蜗壳断面面积变化规律对作用在叶轮上的径向力影响显著.研究结果可为解决由于径向力过大导致断轴问题提供一定的理论依据.     

应用压力早期恢复资料确定低渗地层压力

低渗透油藏的压力恢复曲线,不能用Horner外推压力求取地层压力。基于Horner方程的等轴双曲线形式,提出了应用压力早期恢复资料确定低渗地层压力的新方法。通过油井实际资料计算验证,用该方法计算的地层压力准确可靠,较好地解决了低渗透油藏求地层压力的问题。     

Dropwise Condensation Heat Transfer Coefficient on the Horizontal Circular Surface with Radial Gradient Surface Energy

A theoretical model is developed for the dropwise condensation heat transfer on the horizontal circular surface with radial gradient surface energy based on the heat transfer model of individual condensate drop and the size distribution model of condensate drop on homogeneous condensation surface.The effect of variation of contact angle on the gradient surface on condensation heat transfer and condensate drop size distribution is taken account of in this model.The theoretical calculation method was obtained to predict the dropwise condensation heat transfer coefficient on the horizontal circular surface with radial gradient surface energy under various wall subcooled temperature,contact angle profile on wall surface,and working fluid.The effects of surface energy gradient,wall subcooled temperature,and thermophysical properties of condensate on the condensation heat transfer are discussed respectively.The calculation results show that the condensation heat transfer coefficient increases slightly with the increase of wall subcooled temperature.As latent heat and surface tension increasing,the condensation heat transfer coefficient increases.A larger surface energy gradient induces a larger condensation heat transfer coefficient.     

弧形钢闸门抗滑稳定可靠性分析

以弧形钢闸门自重、静水压力、闸墩及护坡自重、闸墩基础与地基间的摩擦系数和基底粘着力等因素作为随机变量,探讨了弧形钢闸门抗滑稳定可靠性分析方法,建立了抗滑稳定极限状态方程。结合工程实例对弧形钢闸门抗滑稳定可靠性进行了定量分析,可靠性指标b为4.1688,失效概率Pf为6.717×10-5,并与传统的容许应力法作了比较。结果表明,该方法更科学、更合理、更具有实际意义。     

金属体积成形过程的无网格RPIM方法分析

建立了基于无网格径向点插值RPIM法的二维体积成形动态显式计算模型.采用具有Delta函数性质的RPIM形函数构造位移域，因此可以很方便地施加本质边界条件.基于防御节点法给出了二维接触碰撞问题的接触力计算方法，避免罚函数法罚因子选择问题，以及拉格朗日乘子法不适合显式算法的问题.采用完全拉格朗日格式和弹塑性本构关系解决金属体积成形过程所涉及的几何非线性和材料非线性问题，并通过将工件变形分解为偏量部分和体积部分，有效消除金属体积成形中的体积自锁现象.数值算例表明，该算法可方便准确处理大变形畸变问题，是模拟金属体积成形过程的一种有效方法.     

杉木和I-72杨人工林木材干缩性质的研究

通过对杉木和I-72杨人工林木材南北向、不同高度位置、不同径向位置横向干缩(弦、径向)的测量,研究上述3个因素对2种木材横向干缩(弦、径向)的影响规律。结果表明:南北向的不同对杉木和I-72杨人工林木材的干缩均无显著影响;高度位置的不同对杉木和I-72杨木的弦向干缩均有显著影响,而对径向干缩则无显著影响;径向位置的不同对杉木和I-72杨人工林木材的径、弦向干缩均有极显著影响:从树皮到髓心,木材径、弦向干缩逐渐减小,与其基本密度的变化趋势一致。     

径向槽对硬质合金圆锯片"啸声"影响的研究

"啸声"是木工硬质合金圆锯片空转的主要噪声源,是一种自激振动噪声.本文主要研究径向槽对硬质合金圆锯片噪声的影响.研究结果表明,采用金属铜填塞径向槽底部圆孔技术,可以消除硬质合金圆锯片在整个测试转速范围的"啸声".而其他两种普通径向槽的圆锯片只能在较高转速下消除"啸声".此外,径向槽底部塞有金属铜圆锯片的空气动力性噪声比未塞有金属铜的圆锯片略低2～3 dB(A).