Mitigating nitrous oxide emissions from agricultural soils by precision management

Nitrous oxide (N₂O) emissions make up a significant part of agricultural greenhouse gas emissions. There is an urgent need to identify new approaches to the mitigation of these emissions with emerging technology. In this short review four approaches to precision managements of agricultural systems are described based on examples of work being undertaken in the UK and New Zealand. They offer the opportunity for N₂O mitigation without any reduction in productivity. These approaches depend upon new sensor technology, modeling and spatial information with which to make management decisions and interventions that can both improve agricultural productivity and environmental protection.     

The spread of the fall armyworm Spodoptera frugiperda in Africa—What should be done next?

Journal of Plant Diseases and Protection - The following text summarizes the different perspectives of presenters participating in the section Plant Protection in the Tropics and Subtropics, 61st...     

Semisynthesis and pharmacological investigation of lipo-alkaloids prepared from aconitine

Processed aconite drugs are widely used in Eastern medicine as painkillers and antirheumatic agents. It is known that the traditional processing of aconite drugs increases the amount of lipo-alkaloids. In order to obtain information about the pharmacological potential of these compounds, semisynthesis of 9 aconitine-derived lipo-alkaloids was carried out and their COX-1, COX-2 and LTB₄ formation inhibitory activities were investigated. It was found that compounds esterified with unsaturated fatty acids demonstrated significant COX-2 inhibitory effects, while in the COX-1 assay only 14-benzoylaconine-8-O-eicosapentaenoate exerted remarkable activity. The inhibition of LTB₄ formation was pronounced in cases of long chain fatty acid derivatives.     

Bedeutung eines jahreszeitlich unterschiedlichen Einschlagszeitpunktes für das Trocknungsverhalten des Schnittholzes von Fichten (Picea abies (L.) Karst.)

Zusammenfassung:   Die vorliegende Untersuchung hat zum Ziel, die Auswirkungen eines jahreszeitlich unterschiedlichen Einschlagszeitpunktes von Fichten (Winter- und Sommereinschlag) auf die Dimensionsstabilität des daraus erzeugten Schnittholzes zu erfassen und zu quantifizieren. Hierzu wurden jeweils 12 Fichten aus Winter- und Sommereinschlag unmittelbar nach der Aufarbeitung im Bestand zu Bauschnittholz in praxisüblichen Dimensionen verarbeitet. Die Erfassung der trocknungsbedingten Verwerfungen des Schnittholzes erfolgte mittels Vermessung der Kantholzform vor und nach einer technischen Kammertrocknung (Zielfeuchte u = 15 ± 3%). Dabei zeigte sich, dass der saisonal unterschiedliche Zeitpunkt der Fällung der Bäume keinen statistisch abgesicherten Einfluss auf die durchschnittlichen Verwerfungen bzw. die Dimensionsstabilität der daraus erzeugten Kanthölzer hatte.     

The impact of extraction methodologies on the toxicity of sediments in the zebrafish (Danio rerio) embryo test

Purpose

Traditionally, methods for sediment extractions are characterised using chemical analyses. However, in order to evaluate sediment extracts with regard to biological effects and, thus, bioaccessibility, extraction methods have to be compared to effect data obtained from experiments with in situ exposure scenarios, i.e., sediment contact tests. This study compares four extraction methods and sediment contact test data from a previous project with respect to predictive power in the fish embryo test with zebrafish (Danio rerio).

Materials and methods

A natural and an artificial sediment spiked with a mixture of six organic pollutants (2,4-dinitrophenol, diuron, fluoranthene, nonylphenol, parathion and pentachlorophenol) were extracted using (a) membrane dialysis extraction (MDE), (b) a Soxhlet procedure, (c) hydroxypropyl-??-cyclodextrin (HPCD) or (d) Tenax^®-TA. Whereas the former two are regarded being exhaustive with respect to non-covalently bound contaminants, the latter two are considered to predict bioaccessibility. Resulting extracts were tested in the fish embryo assay with D. rerio for embryotoxic and teratogenic potential.

Results and discussion

Mortalities caused by organic extracts from Soxhlet extraction and MDE were high. However, HPCD extracts turned out to be at least as effective as extracts obtained with these two methods. One possible reason might be short ageing time of the spiked sediments. Only Tenax^®-TA extracts gave results comparable to the sediment contact assay for natural sediment, but revealed low reproducibility. Significant differences between natural and artificial sediment were found for extracts obtained with techniques using native (i.e., non-freeze-dried) sediments, i.e., HPCD and Tenax^®-TA. In contrast, MDE and Soxhlet extracts used freeze-dried sediment and did not differentiate between natural and artificial sediment. Therefore, freeze-drying has likely altered and equalised sediment properties that influence accessibility, such as composition of bacterial communities and organic matter quality.

Conclusions

Four extraction methods were successfully characterised with respect to their stringency and predictiveness for bioaccessibility. MDE was confirmed as an alternative to Soxhlet extraction. High mortalities induced by HPCD extracts underline the need to include ageing into consideration when assessing sediments. Although Tenax^®-TA may basically be used to predict bioaccessibility in the fish embryo test, the high variability observed warrants further investigation of the relation between effect and extractability. Apparently, freeze-drying can severely affect sediment properties, potentially eliminating individual properties of natural sediments.     

Quantification of heterocyclic aromatic amines in fried meat by HPTLC/UV-FLD and HPLC/UV-FLD: a comparison of two methods

A recently developed HPTLC/UV-FLD method was compared to the routinely used HPLC/UV-FLD method for the quantification of heterocyclic aromatic amines (HAA) formed at trace levels during the heating process of meat. For formation of these process contaminants under normal cooking conditions, beef patties were fried in a double-contact grill at 230 degrees C for five different frying times and extracted by solid-phase extraction. The HAAs most frequently found, that is, 2-amino-1-methyl-6-phenylimidazo[4,5- b]pyridine (PhIP), 2-amino-3,8-dimethylimidazo[4,5- f]quinoxaline (MeIQx), 2-amino-3,4,8-trimethylimidazo[4,5- f]quinoxaline (4,8-DiMeIQx), 9 H-pyrido[3,4- b]indole (norharman), and 1-methyl-9 H-pyrido[3,4- b]indole (harman), were quantified by two chromatographic methods, which were orthogonal to each other (normal versus reversed phase system). Both methods showed a similar performance and good correlation of the results ( R (2) between 0.8875 and 0.9751). The comparison of running costs and run time in routine analysis proved HPTLC/UV-FLD to be more economical (factor of 3) and faster (factor of 4) due to its capability of parallel chromatography. The HAA findings calculated by standard addition increased with the heating time from <1 to 33 microg/kg related to 3-6 min of frying time. The precision (RSD) was between 7 and 49% (HPTLC) and between 5 and 38% (HPLC) at these very low HAA levels formed.     

Contrasting response of two forest soils to nitrogen input: rapidly altered NO and N2O emissions and nirK abundance

Denitrification represents one of the main microbial processes producing the primary and secondary greenhouse gases nitrous oxide (N₂O) and nitric oxide (NO) in soils. It is well established that abiotic factors like the soil water content and the availability of nitrogen (N) are key parameters determining the activity of denitrifiers in soils. However, soils differing regarding their characteristics such as the content of C_org, the soil texture or the pH value may respond in specific manners to equivalent changes in soil moisture and N input. Thus, short-term incubation experiments were performed to test and compare the capacity of two contrasting Austrian forest soils to respond to mineral N application at increased soil water contents. Soils from the pristine Rothwald forest (rich in C_org) and the more acidic Schottenwald forest (poor in C_org) were amended with either NH ₄ ⁺ -N or NO ₃ ^? -N and were incubated at 40% and 70% water-filled pore space for 4 days. Changes in mineral N pools, nitrite reductase activity and NO and N₂O emission rates were measured, and the abundance and structural community composition of the functional group involved in nitrite reduction were analysed via quantitative real-time polymerase chain reaction and terminal restriction fragment length polymorphism analysis of the nirK gene. Rapid and distinct activity responses to increased soil moisture and altered mineral nitrogen availability were observed in two contrasting forest soils. In both soils, nitrogen oxide emission rates were stimulated by N inputs and, depending on the soil moisture status, either NO or N₂O emission was prevailing. However, different N cycling processes appeared to predominate in either soil under equivalent treatment. Nitrogen oxide emissions peaked following NO ₃ ^? application in Schottenwald soils but were the highest after NH ₄ ⁺ application in Rothwald soils. Denitrifying (nirK) communities differed significantly in Rothwald and Schottenwald soils; however, changes in the community structure were marginal during the short-term incubation. Abundances of nirK genes remained unaffected by N application in either soil. The soil water content affected nirK gene abundances only in Rothwald soil, indicating a distinct reaction of nitrite reducing communities in the two soils.     

A new plant-based bioassay for aquatic sediments

Background, Goal and Scope  To date, standardised bioassays for the assessment of the ecotoxicological potential in sediments and dredged material use test organisms like bacteria, algae and crustaceae. This paper presents the development and application of a novel sediment contact test (whole sediment) withMyriophyllum aquaticum, a representative of rooted aquatic macrophytes. The aim of the present study is to demonstrate the value of a sediment contact test with rooted macrophytes as a supplement to existing test batteries in order to improve the assessment of sediment toxicity. Methods  The newly developed sediment contact test withMyriophylhim aquaticum was applied to natural whole sediments. For performing the test, whorls ofMyriophyllum aquaticum were directly planted in the native sediment and incubated in the light at 24°C (cf. section results and discussion). The end points of the test were the number of the shoots and the fresh weight of the whole plants. The duckweed growth inhibition test withLemna minor according to ISO/DIS 20079 was performed in pore waters from sediment samples. The results of the sediment contact test withMyriophyllum aquaticum were compared with each other and with those of the aquatic duckweed test. Results and Discussion  A test protocol for the new plant-based sediment contact test using the aquatic plantMyriophyllum aquaticum as an indicator was developed. The best control sediment proved to be the OECD sediment (OECD 207). A test period of 10 days appeared to be sufficient for the test. The increase of biomass and the derived growth rate were found to be the most suitable evaluation parameters. The growth behaviour ofMyriophyllum aquaticum differed depending on the origin of sediments. Therefore, plant-affecting contamination, that is bound in sediments, was indicated. Conclusions  The novel sediment contact test withMyriophyllum aquaticum can indicate phytotoxic effects in sediments. Therefore, it allows a better assessment of the overall-toxicity in whole sediments. Recommendations and Outlook  The sediment contact test withMyriophyllum aquaticum is a valuable tool for the evaluation of the ecotoxicological risk potential of waters and sediments. It should become a complement to a standardised test battery generally used for the assessment of sediment toxicity.     

Priming effects in different soil types induced by fructose, alanine, oxalic acid and catechol additions

It is well established that certain substrate additions to soils may accelerate or retard the mineralisation of soil organic matter. But up to now, research on these so called ‘priming effects’ was almost exclusively conducted with arable soils and with plant residues or glucose as additives. In this study, the effects of the uniformly ¹⁴C-labelled substrates fructose, alanine, oxalic acid and catechol on the mineralisation of soil organic carbon (SOC) from different horizons of two forest soils (Haplic Podzol and Dystric Cambisol) and one arable soil (Haplic Phaeozem) under maize and rye cultivation were investigated in incubation experiments for 26 days. Apart from the controls, all samples received substrate additions of 13.3 μg substrate-C mg⁻¹ C_org. During the incubation, CO₂-evolution was measured hourly and the amount of ¹⁴CO₂ was determined at various time intervals. In almost all soils, priming effects were induced by one or several of the added substrates. The strongest positive priming effects were induced by fructose and alanine and occurred in the Bs horizon of the Haplic Podzol, where SOC mineralisation was nearly doubled. In the other soil samples, these substrates enhanced SOC mineralisation by +10 to +63%. Catechol additions generally reduced SOC mineralisation by −12 to −43% except in the EA horizon of the Haplic Podzol where SOC-borne CO₂-evolution increased by +46%. Oxalic acid also induced negative as well as positive priming effects ranging from −24 to +82%. The data indicate that priming effects are ubiquitously occurring in surface and subsoil horizons of forest soils as well as in arable soils. Although a broad variety of soils was used within this study, relationships between soil properties and priming effects could not be ascertained. Therefore, a prediction on occurrence and magnitude of priming effects based on relatively easily measurable chemical and physical soil properties was not possible. Nevertheless, the data suggest that positive priming effects are most pronounced in forest soils that contain SOC of low biodegradability, where the added substrates may act as an important energy source for microbial metabolism.