Potato germplasm development for warm climates: genetic enhancement of tolerance to heat stress

Complex potato hybrids were derived through unilateral sexual polyploidization between Solanum tuberosum cv. Atlantic and 11 diploid hybrids that produced 2n pollen through co-orientation of second division spindles. The hybrids represented the following genomic compositions: TAPB, TAPC, and TAPM where T = S. tuberosum, A = S. andigena, P = S. phureja, B = S. berthaultii, C = S. chacoense, and M = S. microdontum. The B, C, and M components of the hybrids had been selected from heat tolerant accessions. The heat tolerance and agronomic performance of the hybrids were assessed under both controlled environments and field tests. The hybrids exhibited good tuberization potential (tuber number, tuber weight and percent plants producing tubers) under heat stress conditions in controlled environments. Under severe heat stress conditions in the field in Israel, many of the hybrids tuberized when Atlantic failed to produce any tubers at all. Under more moderate heat stress in Virginia, the complex hybrids exhibited total tuber yield not significantly different from Atlantic, although the tuber set per plant was greater. However, the complex hybrids were more tolerant to heat necrosis and hollow heart than Atlantic. Total glycoalkaloids in field-grown tubers did not exceed the acceptable limit for 13 of 26 selections examined. This revised version was published online in July 2006 with corrections to the Cover Date.     

Path analysis of genotype-environment interactions of potatoes exposed to increasing warm-climate constraints

Summary Twenty potato cultivars were tested in replicated trials in three seasons. The weather gradually changed from relatively high humidity and cold air temperatures in February to dry and hot in July. Fresh and dry weights, sucrose, reducing sugar and starch contents were recorded on tubers sequentially harvested over four stages during the growing period of each of the three trials. The data were analyzed for genotype-environment interactions by a path regression model which is composed of a main effect and four multiplicative effects. The model fitted well to the observed data for all traits but reducing sugar. Results of dry tuber weight were used to calculate a heat susceptibility index for each of the cultivars. Four components of the index were identified based on the path model. Comparison of sizes of the components provided information on the degree of response to the environmental stress of each of the cultivars during successive stages of growth. High yielding and heat tolerant cultivars were identified based on the experimental results.     

The effects of cell wall swelling on the permeability of grand fir wood

Summary The longitudinal permeability of Abies grandis wood swollen to varying degree by water vapour sorption has been measured using a non-swelling liquid. The results obtained show that cell wall swelling causes a reversible decrease in permeability in both air dried and solvent exchange dried specimens.Direct microscopic measurements have shown that change in lumen diameter cannot explain the observed effect.Mathematical analysis of the data suggests that the permeability decrease may be due to increase in thickness of bordered pit membrane fibrils resulting from sorption of water.     

Polymer effects on runoff and soil erosion from sodic soils

High levels of soil sodicity, resulting from intensive irrigation with saline-sodic waters, lead to an increased soil susceptibility to seal formation and to severe problems of runoff and soil erosion. The objective of this study was to investigate the efficacy of the addition of small amounts of an anionic polyacrylamide (PAM) to the irrigation water in controlling seal formation, runoff and soil erosion. Two predominantly montmorillonitic soils were studied, a grumusol (Typic Haploxerert) and a loess (Calcic Haploxeralf), having naturally occurring exchangeable sodium percentage (ESP)>12. The soils were exposed to 60 mm of simulated irrigation with commonly used tap water (TW, electrical conductivity=0.8 dS m^–1; sodium adsorption ratio (SAR)=2), or saline water (SW, electrical conductivity=5.0 dS m^–1; SAR>12). PAM effectiveness in controlling runoff and erosion from the sodic soils was compared with runoff and erosion levels obtained from untreated soils having low ESPs (<4). For both soils and for both water qualities and polymer concentrations in the irrigation water, PAM was efficient in controlling runoff at low ESP levels and inefficient at high ESP levels. At moderate ESP levels, PAM's efficacy in controlling runoff was inconsistent and varied with water quality and polymer concentration. Conversely, in general, soil loss originating from rill erosion, was significantly and effectively reduced in moderate and high ESP soils by addition of PAM to the irrigation water, irrespective of water quality and polymer concentration. PAM was more effective in reducing rill erosion than in reducing runoff in the moderate and high ESP samples, because the energy involved in generating runoff is much higher than that involved in rill erosion. PAM treated surface aggregates were not stable against the distructive forces leading to seal formation and runoff production; but they were stable enough to resist the hydraulic shear exerted by the runoff flow.     

Amending Soil with Sludge,Manure, Humic Acid,Orthophosphate and Phytic Acid: Effects on Infiltration,Runoff and Sediment Loss

Application of organic wastes to cultivated lands can replace mineral fertilizers but may also alter soil physical properties and enhance pollution potential. The objective of this study was to investigate the effects of biosolids [composted manure (MC) and activated sludge (AS)] and specific biosolid component [orthophosphate (OP), phytic acid (PA) and humic acid (HA)] application on soils differing in texture [loamy‐sand (Ramat‐HaKovesh, RH), loam (Gilat, GL) and clay (Bet‐Dagan, BD)], infiltration rate, runoff volume and soil sediment loss. The soils were packed in erosion boxes (400 × 200 × 40 mm) and subjected to six consecutive simulated rainstorms, each of 186 mm deionized water. The results showed that runoff volume and sediment loss from untreated soils increased with increasing clay contents. In treated soils, the response to AS application differed from the response to other amendments; in the BD clay and GL loam, it was the only amendment that caused a decrease in sediment removed by runoff. In the RH loamy‐sand, all amendments reduced the final infiltration rate, but only AS and HA increased the measured runoff. It is proposed that the difference in the response of the soils to the amendments is associated with the soil's ability to attenuate changes in the negative charge on the clay edges following the increase in the specific adsorption of charged anions, thus controlling clay swelling and maintaining aggregate integrity. The effects of amending soils with a source of organic matter in order to control runoff and soil erosion are not straight forward and depend on soil and amendment properties. Copyright © 2015 John Wiley & Sons, Ltd.     

Seed oil and fatty acid content in okra (Abelmoschus esculentus) and related species

Approximately 1100 genebank accessions of okra (Abelmoschus esculentus) and 540 additional accessions that included six of its related species-A. caillei, A. crinitis, A. esculentus, A. ficulneus, A. manihot, A. moschatus and A. tuberculatus-were evaluated for seed oil content using time domain NMR (TD-NMR). Oil content in seed of A. caillei, A. esculentus, A. ficulneus, A. manihot, A. moschatus and A. tuberculatus was in the ranges 2.51-13.61%, 12.36-21.56%, 6.62-16.7%, 16.1-22.0%, 10.3-19.8% and 10.8-23.2%, respectively. Accession PI639680 (A. tuberculatus) had the highest seed oil content (～23%). Accessions of A. esculentus with high seed oil content included PI nos. PI274350 (21.5%), PI538082 (20.9%) and PI538097 (20.9%). Values for the three accessions of A. manihot with the highest seed oil content were PI nos. PI639673 (20.4%), PI639674 (20.9%) and PI639675 (21.9%), all representing var. tetraphyllus. Average percent seed oil in materials of A. esculentus from Turkey and Sudan (17.35% and 17.36%, respectively) exceeded the averages of materials from other locations. Ninety-eight accessions (total of six species) were also examined for fatty acid composition. Values of linoleic acid ranged from 23.6-50.65% in A. esculentus. However, mean linoleic acid concentrations were highest in A. tuberculatus and A. ficulneus. Concentrations of palmitic acid were significantly higher in A. esculentus (range of 10.3-36.35%) when compared to that of other species, and reached a maximum in PI489800 Concentrations of palmitic acid were also high in A. caillei (mean = ～30%). Levels of oleic acid were highest in A. manihot, A. manihot var. tetraphyllus and A. moschatus.     

Uptake of veterinary medicines from soils into plants

Medicines play an important role in the treatment and prevention of disease. Whereas the side effects on human and animal health resulting directly from treatment have been widely documented, only recently have the occurrence and fate of medicines in the environment and the potential consequences for human health been recognized as an issue warranting consideration. Medicines have been shown to be released to soils and to persist in the environment. This study was performed to investigate the potential for a range of veterinary medicines to be taken up from soil by plants used for human consumption and to assess the potential significance of this exposure route in terms of human health. Soil analyses indicated that, for selected substances, measurable residues of these are likely to occur in soils for at least 5 months following application of manure containing these compounds. Experimental studies on the uptake of veterinary medicines into carrot roots (tubers) and lettuce leaves showed that only florfenicol, levamisole, and trimethoprim were taken up by lettuces, whereas diazinon, enrofloxacin, florfenicol, and trimethoprim were detected in carrot roots. Measured concentrations in plant material were used to model potential adult human exposure to these compounds. Although exposure concentrations were appreciable in a few instances, accounting for approximately 10% of the acceptable daily intake values (ADI), all were lower than the ADI values, indicating that, at least for compounds with properties similar to those considered here, there is little evidence of an appreciable risk. This exposure route may, however, be important when veterinary medicines have a very low ADI, at which they elicit subtle effects over prolonged periods, or when exposure is occurring via a number of routes at once. Although degradation products (produced in the soil or the plant) were not measured, it is possible for some substances that these could increase the risks to consumers.     

Water quality,ecological processes and management procedures in a periphyton biofiltration system in mariculture: A statistical analysis

A periphyton biofiltration system of mariculture effluents was studied to identify ecological processes and management procedures that strongly affect the biofilter functioning, in order to attain optimal biomass production and nutrient removal. The multivariate statistical technique of factor analysis allowed reducing the large amount of data available into three main factors. The first factor, which accounted for 49% of the overall data variability, was herein called “biological activity” as it represents the joint effects on the variables measured of photosynthesis, N and P uptake, respiration and decomposition of organic matter. The second and third factors were “autotrophic biomass density” and “nitrite and phosphate uptake/release balance”, which, respectively, accounted for further 20% and 14% of the data variability. A conceptual model, describing the functioning of the periphyton biofilters, revealed a delicate equilibrium among the different processes, whose understanding help to manage the biofilters towards optimal production of periphytic biomass and nutrient removal. Raising flow rate raised the overall nutrient uptake rate but reduced uptake efficiency and diluted nitrifying particles. A reduced flow rate led to sedimentation of organic particles, decomposition and nutrients re‐mineralization. Apparently, control of water flow and nutrient content, periphyton substrate area and the cleaning of the effluent supply system are key management elements for the operation of a periphyton‐based biofilter system that maximizes both periphyton biomass production and nutrient removal.