Screening of Human CYP1A2 and CYP3A4 Inhibitors from Seaweed In Silico and In Vitro

Phenolic compounds and carotenoids are potential inhibitors of cytochrome P450s. Sixteen known compounds, phenolic compounds and carotenoids from seaweed were examined for potential inhibitory capacity against CYP1A2 and CYP3A4 in silico and in vitro. Morin, quercetin, and fucoxanthin inhibited the enzyme activity of CYP1A2 and CYP3A4 in a dose-dependent manner. The IC₅₀ values of morin, quercetin, and fucoxanthin were 41.8, 22.5, and 30.3 μM for CYP1A2 and 86.6, 16.1, and 24.4 μM for CYP3A4, respectively. Siphonaxanthin and hesperidin did not show any significant effect on CYP1A2, but they slightly inhibited CYP3A4 activity at high concentrations. In silico modeling of CYP’s binding site revealed that the potential inhibitors bound in the cavity located above the distal surface of the heme prosthetic group through the 2a or 2f channel of CYPs. This study presents an approach for quickly predicting CYP inhibitory activity and shows the potential interactions of compounds and CYPs through in silico modeling.     

Dietary protein requirement for juvenile mandarin fish,Siniperca scherzeri

An 8‐week feeding trial was conducted to investigate the dietary protein requirement of juvenile mandarin fish, Siniperca scherzeri, a demersal freshwater piscivore with high commercial value in East Asia. Five isolipidic (100 g/kg) and isoenergetic (20 MJ/kg) practical diets were formulated to contain graded levels of 450, 500, 550, 600, and 650 g/kg crude protein, using mackerel fishmeal as the sole source of protein. Each of the five test diets was fed to visual satiety to triplicate groups of fish (initial mean body weight ± SE; 20.1 ± 0.2 g) reared in a recirculating freshwater system over the experimental period. Fish growth performance in terms of weight gain tended to improve with increasing dietary protein level, and the highest values were observed in those fish fed the 600–650 g/kg diets. Feed intake significantly declined as the protein content of the diet increased. Feed efficiency and protein retention tended to increase with increasing dietary protein levels, from 450 to 600 g/kg, and then declined when dietary protein content further increased to 650 g/kg. A similar trend was also found for the protein efficiency ratio, although the observed changes did not reach statistical significance. Whole‐body composition and plasma biochemical parameters were not significantly affected by the dietary protein content. Based on these findings and a broken‐line model of growth, 614.4 g/kg seems to be the proper amount of protein in a practical diet for >20 g mandarin fish.     

Prediction of bending properties for structural glulam using optimized distributions of knot characteristics and laminar MOE

This study established a prediction model for bending properties of glued-laminated timber (glulam) using optimized knot and modulus of elasticity (MOE) distributions of lumber laminate as the main input variables. For this purpose, knot and MOE data were investigated for all pieces of lumber that were prepared for glulam manufacturing, and statistical distributions of knot size, knot number in one lumber, and MOE of each laminate were optimized as distribution functions. These knot and MOE data were used as input variables in the prediction model for bending properties, and were also used in generating virtual glulam using the inverse transform method. Prediction of bending properties for glulam was carried out using the transformed section method, which is partially provided in ASTM D 3737 (Annex A4). Predicted values were compared with those from full-scale four-point bending tests for 60 six-layered glulams with 10 different laminar combinations. Finally, the allowable bending properties of glulam for each specific laminate combination were determined by calculating the fifth percentile of the modulus of rupture and the average modulus of elasticity from virtual test results of more than 1000 virtual glulams. From the results of this study, predicted bending properties for glulam and their distributions could be used for structural design in both allowable stress design and limit state design.     

Molecular characterization of Korean rabies virus isolates

The nucleoprotein (N) and glycoprotein (G) of 11 Korean rabies virus (RABV) isolates collected from animals diagnosed with rabies between 2008 and 2009 were subjected to molecular and phylogenetic analyses. Six isolates originated from domestic animals (cattle and dogs) and five were obtained from wild free-ranging raccoon dogs. The similarities in the nucleotide sequences of the N gene among all Korean isolates ranged from 98.1 to 99.8%, while those of the G gene ranged from 97.9 to 99.3%. Based on the nucleotide analysis of the N and G genes, the Korean RABV isolates were confirmed as genotype I of Lyssavirus and classified into four distinct subgroups with high similarity. Phylogenetic analysis showed that the Korean isolates were most closely related to the non-Korean NeiMeng1025B and 857r strains, which were isolated from rabid raccoon dogs in Eastern China and Russia, respectively. These findings suggest that the Korean RABV isolates originated from a rabid raccoon dog in Northeastern Asia. Genetic analysis of the Korean RABV isolates revealed no substitutions at several antigenic sites, indicating that the isolates circulating in Korea may be pathogenic in several hosts.     

Occurrence of Honeysuckle Yellow Vein Virus (HYVV) containing a monopartite DNA-A genome in Korea

Two newly emerged begomoviruses were isolated from naturally infected tomato (Solanum lycopersicum) plants grown in greenhouses at Jeju Island and Dangjin in Korea and their genomes were characterized. These viruses-infected plants had very small leaves that curled upward, yellow margins and a leathery appearance, and a bushy and stunted appearance with short internodes. Nucleotide (nt) sequence analysis of their genomes showed that they have a DNA-A component of a monopartite begomovirus. Their genomes comprised 2763 and 2764 nucleotides with six open reading frames. The results of nt sequence similarity analysis of DNA-A genome between the two Korean isolates and isolates of Tobacco leaf curl Japan virus (TbLCJV), Honeysuckle yellow vein virus (HYVV), Honeysuckle yellow vein mosaic virus (HYVMV), and Eupatorium yellow vein virus in Japan (EpYVV) showed that they are likely similar to HYVV-[Masuda] (89.4–92.8% nt identity). Consequently, we tentatively propose the two isolates’ names as HYVV-Jeju and -DJ according to the ICTV geminivirus rules. Phylogenetic relationship analysis of 33 DNA-A genome sequences using PAUP* 4.0b10 and MrBayes revealed that HYVV-Jeju and -DJ belong to the Far East Asian begomovirus species complex. Within the Far East Asian begomovirus species complex, HYVV-Jeju and -DJ are distantly related to EpYVV, HYVMV, and TbLCJV groups. Based on the presence of a recombination fragment spanning the C3 ORF, a recombinant origin was suggested for both HYVV-Jeju and –DJ, with parents close to Japanese isolates HYVMV-[SP1:00] and Eupatorium yellow vein virus (EpYVV)-[Suya]. In addition, the presence of a further recombination fragment spanning the IR suggested the parents of HYVV-DJ were close to HYVV-Jeju and EpYVV-[Suya].     

Effect of SiC and ZnO Nanoparticles on UV Absorbance and Heat Transfer of PET Composite Film

Zinc oxide (ZnO) and silicon carbide (SiC) nanoparticles were compounded with polyethylene terephthalate (PET) by using a twin screw extruder, and their effect on the UV absorption and heat transfer in PET/ZnO and PET/SiC composite films was investigated. The presence of ZnO and SiC in the PET matrix was verified by X-ray diffraction. The UV absorbance of both PET/ZnO and PET/SiC composite films increased with increasing particle content. The UV absorbance of PET/SiC was higher than that of PET/ZnO under the same particle content. A thermal imaging camera was used to analyze the heat transfer in PET/ZnO and PET/SiC composite films after heating them to 40 °C. As the content of ZnO and SiC particles increased, the temperature decreased more rapidly. PET/SiC showed faster cooling than PET/ZnO because of the higher thermal conductivity of SiC compared to that of ZnO. Response temperature surfaces for PET/ZnO and PET/SiC were obtained by using an exponential decay function and a second order equation, and the elapsed times to cool to room temperature were estimated.     

Comparative evaluation of MCP gene in worldwide strains of Megalocytivirus (Iridoviridae family) for early diagnostic marker

Members of the Iridoviridae family have been considered as aetiological agents of iridovirus diseases, causing fish mortalities and economic losses all over the world. Virus identification based on candidate gene sequencing is faster, more accurate and more reliable than other traditional phenotype methodologies. Iridoviridae viruses are covered by a protein shell (capsid) encoded by the important candidate gene, major capsid protein (MCP). In this study, we investigated the potential of the MCP gene for use in the diagnosis and identification of infections caused Megalocytivirus of the Iridoviridae family. We selected data of 66 Iridoviridae family isolates (53 strains of Megalocytivirus, eight strains of iridoviruses and five strains of Ranavirus) infecting various species of fish distributed all over the world. A total of 53 strains of Megalocytivirus were used for designing the complete primer sets for identifying the most hypervariable region of the MCP gene. Further, our in silico analysis of 102 sequences of related and unrelated viruses reconfirms that primer sets could identify strains more specifically and offers a useful and fast alternative for routine clinical laboratory testing. Our findings suggest that phenotype observation along with diagnosis using universal primer sets can help detect infection or carriers at an early stage.     

Spectral Doppler ultrasound in the major arteries of normal conscious immature micropigs

Spectral waveform analysis of blood flow velocity in the major arteries of six healthy, conscious immature micropigs was determined using Doppler ultrasonography. Doppler spectral tracings were recorded from the external iliac artery, femoral artery, and renal arcuate artery. Tracings were also taken from three parts of the common carotid artery and two parts of the abdominal aorta. Spectral Doppler parameters included peak systolic velocity, early diastolic velocity, peak systolic velocity-to-end diastolic velocity ratio, resistive index, and pulsatility index. In addition, the diameter of major arteries and indirect blood pressure were measured. These results from spectral Doppler analysis in major arteries may be useful as reference ranges in the future studies of vascular hemodynamics in immature micropigs.     

Effect of polystyrene mixing on mechanical properties and structural changes in melt spinning

To increase the spinning speed of poly(trimethylene terephthalate) (PTT) fibers, polystyrene (PS) was selected as an additive polymer in the PTT matrix. Mixing of the immiscible PS with PTT led to an increase in spinning speed up to 5,500 m/min. PS was employed to improve the extensibility of the matrix PTT in the spinning process as it can prevent PTT molecular orientation. Experimental results show that the mixing of PS achieved this. The elongation at break of spun fibers increased with the amount of PS. PS addition prevented fiber orientation, especially amorphous orientation, and improved drawability, and as such, increased spinning speed up to 5,500 m/min.     

The effect of bentonite concentration on the drug delivery efficacy of a pH-sensitive alginate/bentonite hydrogel

We produced a protein loaded, pH-sensitive alginate-bentonite hydrogel for wound dressings. Alginate is a nontoxic polysaccharide with favorable pH-sensitive properties that make it useful for the intestinal delivery of protein drugs. However, the use of alginate for drug delivery is limited by drug leaching and rapid dissolution of alginate at the higher pH, which may result in lower entrapment efficiency and a burst in the release of entrapped protein drugs. To overcome these problems, we created a novel cross-linked alginate-bentonite hydrogel by combining mineral-rich bentonite with the alginate matrix along with an additive to ensure controlled release. We analyzed the gel in the drug loading process in an aqueous environment by looking at the release profiles of a model protein drug (BSA) from the hydrogel at pH values of 4.5, 5.2 (skin area) and 7.4, 9.2 (wound area). The swelling ratio decreased with bentonite concentration, but did not fall below 6. The rate of drug release was slowest at a pH value of 4.5 and fastest at a pH value of 9.2. The rate of drug release decreased with bentonite concentration. The presence of bentonite prevents the rapid dissolution of alginate at the higher pH, ensuring the controlled release of the entrapped drug.