Involvement of histone H2B monoubiquitination in the regulation of mouse preimplantation development

Histone H2B monoubiquitination (H2Bub1) plays an important role in developmental regulation in various vertebrate species. However, the role of H2Bub1 in mammalian preimplantation development remains unclear. In the present study, we examined the role of H2Bub1 in the regulation of mouse preimplantation development. Based on immunocytochemical analysis using an anti-H2Bub1 antibody, no H2Bub1 signal was detected in the metaphase chromosomes of unfertilized oocytes or the pronuclei of early 1-cell stage embryos, but a weak signal was observed in late 1-cell stage embryos. The signal increased after cleavage into the 2-cell stage, and thereafter a strong signal was observed until the blastocyst stage. To assess the significance of H2Bub1 in the regulation of preimplantation development, RNF20 (an H2B-specific ubiquitin E3 ligase) was knocked down using small interfering RNA (siRNAs). In embryos treated with siRNA, the levels of Rnf20 mRNA and H2Bub1 decreased at the 4-cell and morula stages. Although these embryos developed normally until the morula stage, only one-third developed into the blastocyst stage. These results suggested that H2Bub1 is involved in the regulation of preimplantation development.     

Chemical changes of kenaf core binderless boards during hot pressing (I): influence of the pressing temperature condition

Self-bonding is the main factor of the performance expression of binderless boards, and therefore its clarification is considered to be an important issue. For this purpose, a series of chemical analyses were conducted on kenaf core binderless boards and their chemical changes during the hot-pressing process are discussed in this article. First of all, binderless boards were prepared from kenaf core powder at different pressing temperatures (without steam-explosion process) and were used for chemical analyses after they were reduced into powders and extracted with methanol. To investigate their chemical changes, lignin, holocellulose, and neutral sugar contents were determined, Fourier transform infrared (FTIR) spectra were recorded, and the nitrobenzene oxidation procedure was applied. As a result, it was found that parts of lignin and hemicelullose were decomposed during the hot-pressing process; however, the contribution of the resulting fractions to selfbonding was not observed. In addition, progress of condensation reactions in lignin and the formation of chemical bonds by low molecular weight conjugated carbonyl compounds in methanol extractives were observed. Thermal softening of lignin is also suggested to play an important role in the expression of board performance.     

Initial shapes of stress-strain curve of wood specimen subjected to repeated combined compression and vibration stresses and the piezoelectric behavior

This study investigated the relationship between the initial shape of the stress (σ)-strain (ε) curve of a Chamaecyparis obtusa wood specimen subjected to repeated combined compression and vibration stresses at various angles between the fiber direction and load direction and the piezoelectric behavior. The main findings of the study are: (1) the σ-ε curve became convex initially, and then the stress was proportional to the strain. The σ-ε curve had almost the same shape during both loading and unloading. (2) The σ-piezoelectric voltage (P) curve was nonlinear, with a maximal point or cusp on the curve, which had almost the same shape during both loading and unloading, as was also observed for the σ-ε curve. (3) The plot of the first derivative of the stress [dσ/dε (= σ′)] against ε was nonlinear. The σ′-ε and P-ε curves at various angles were fairly similar. (4) The stress at the maximal point (or cusp) of the σ-P curve decreased with an increase in the angle between the fiber direction and load direction. The tendency of the stresses was very similar to that of Young’s modulus and compression strength calculated from Hook’s law and Hankinson’s law, respectively.     

Manufacture and mechanical properties of binderless boards from kenaf core

Binderless boards were prepared from finely ground powders of kenaf (Hibiscus cannabinus L.) core under varying manufacturing conditions. This research was designed to investigate their mechanical properties and evaluate the various manufacturing conditions: pressing temperature and time, pressing pressure, board density, board thickness, grain size of raw materials, and addition of furfural. The mechanical properties (i.e., modulus of rupture and elasticity, internal bonding strength) of boards increased with increasing board density and met the requirement for 15 type medium-density fiberboard (MDF) by JIS A 5905-1994. Thickness swelling and water absorption of boards exceeded the maximum permitted levels for 15 type MDF and S20 grade hardboard by JIS A 5905-1994, which indicates the low water-resistant property of binderless boards. In contrast to that in usual wood-based materials, internal bonding strength showed significant correlations with other board properties: modulus of rupture and elasticity, thickness swelling, and water absorption. We confirmed experimentally that the best manufacturing conditions proved to be as follows: pressing temperature 180°C, time 10min; pressing pressure 5.3MPa; board thickness 5mm; board density 1.0g/cm³; average grain size 53µm; and powder with no furfural content.Part of this paper was presented at the 52nd Annual Meeting of the Japan Wood Research Society, Gifu, April 2002     

Mechanical behavior of the crystal lattice of natural cellulose in wood under repeated uniaxial tension stress in the fiber direction

This study investigated the relationship between the cellulose crystal lattice strain (crystalline region) and the macroscopic surface strain in specimens of Chamaecyparis obtusa wood under repeated uniaxial tension stress in the fiber direction. Changes in the strain of the crystal lattice were measured from the peak of (004) reflection using the transit X-ray method. The macroscopic surface strain of each specimen was measured with a strain gauge. In both loading and unloading, the surface strain changed linearly with changes in stress. However, crystal lattice strain was not linear but exhibited changes along a curve with changing stress. Under stressed conditions, the crystal lattice strain was always less than the surface strain, regardless of the frequency of repetition in the loading and unloading cycle. The ratio of the crystal lattice strain to the surface strain showed a negative correlation for stress in both loading and unloading. That is, the ratio decreased with increasing stress, and finally tend to converge to a specific value. The ratio (I/I ₀) between the diffracted intensity (I ₀) in the (004) plane in the unloaded condition and the diffracted intensity (I) in the (004) plane in the loaded condition tend to converge on a specific value with increasing frequency of repetition. When the substantial tension Young’s modulus of the wood in the longitudinal direction decreased, the ratio of the strain of the crystal lattice to the surface strain also decreased. Moreover, the ratio decreased with increasing microfibril angle of the specimen.     

Effects of growth and dietary crude protein level until first insemination on milk production during first lactation in Holstein heifers

To decrease the age at first calving in Holsteins, the effects of average daily body weight gain (ADG) and crude protein (CP) level until first insemination on growth performance and milk production were examined. The MM group had a target ADG of 0.75 kg and received a diet with a CP level of 14%. The HM and HH groups had a target ADG of 1 kg; both these groups received a diet with CP levels 14% and 16%, respectively. The ADG in the HM and HH groups was 1.1 kg, whereas in the MM group it was 0.97 kg (P < 0.01). The HM and HH groups showed no differences in withers height at body weight 350 kg. The ages at first calving in MM, HM and HH groups were 23.1, 21.0 and 21.8 months, respectively. The HM and HH groups had lower milk yield at day 305 than the MM group (P < 0.01). These results suggest that growth performance until first insemination should be maintained at an ADG of 0.97 kg or less with a CP level of approximately 14%, to shorten time until first insemination and prevent the decrease of milk yield.     

Uptake by dietary exposure and elimination of aflatoxins in muscle and liver of rainbow trout (Oncorhynchus mykiss)

Uptake and elimination of aflatoxins (AFs) by rainbow trout ( Oncorhynchus mykiss ) during a long-term (21 days) dietary exposure were studied to assess contamination by AFs in aquaculture fish fed AF-containing feed. The uptake factor (UF) of aflatoxin B(1) (AFB(1)) in muscle ranged from 0.40 × 10(-3) to 1.30 × 10(-3). AFB(1) concentrations in liver were 165-342 times higher than in muscle. AFs from feed were more highly accumulated in liver than in muscle. Aflatoxicol (AFL) and aflatoxin M(1) (AFM(1)) were detected in muscle and liver and also in the rearing water. AFL concentrations were higher than AFM(1) by 2 orders of magnitude in muscle, and AFL was a major metabolite of AFB(1). The elimination rate constants (α) of AFB(1) and AFL in muscle (1.83 and 2.02 day(-1), respectively) and liver (1.38 and 2.41 day(-1), respectively) were very large. The elimination half-life (t(1/2)) of AFB(1) was 0.38 days (9.12 h) in muscle and 0.50 days (12.00 h) in liver. The elimination half-life of AFL in muscle and liver was 0.34 day (8.16 h) and 0.29 day (6.96 h), respectively. These data show that AFs are eliminated rapidly and are not biomagnified in fish. Thus, AFB(1) concentration in muscle of fish fed AFB(1)-containing feed (ca. 500 μg/kg) decreased to below the detection limit (20 ng/kg) of the most sensitive analytical method at 1.54 days (36.96 h) after the change to uncontaminated feed.     

Reflection and transmission of visible light by sugi wood: effects of cellular structure and densification

Transmittance and reflectance of visible light by sugi wood (Cryptomeria japonica) were investigated in the longitudinal (L) and tangential (T) directions. Transmittance was the highest in the L direction and reflectance was the highest in the T direction, suggesting that structural anisotropy influences transmittance and reflectance. Intra-ring variations observed with a microspectrometer indicated that T transmittance was higher for latewood than for earlywood, but there was no such trend in for L transmittance in which the highest levels occurred near the annual ring boundaries, on either the earlywood or latewood side, and the lowest at the transition from earlywood to latewood. Dependence of L transmittance on wavelength also showed variations according to the intra-ring position. The increasing of transmittance of earlywood at wavelengths?<?500 nm with increasing wavelength was observed, but this was not confirmed for latewood because of absorption by lignin. These observations supported a previously published finding, which was based on measurements in the radial direction, that the number of internal cell wall reflections, rather than density, determines wood lightness. Indeed, in the L direction, most of the incident light passes through lumens in earlywood and through cell walls in latewood, while it is subjected to numerous internal reflections at the interface between lumens and cell walls. This was further confirmed by the transmittance of earlywood being greatly decreased by radial compression.     

Reproductive performance and expression of imprinted genes in somatic cell cloned boars

To assess the performance of boars derived by somatic cell cloning, we analyzed various aspects of their reproductive characteristics and the expression of two imprinted genes. Cloned boars (cloned Duroc × Jinhua) were analyzed for birth weight, growth rate, age at first ejaculation, semen characteristics and fertility, in comparison with naturally bred control boars of the same strain. The expression of imprinted genes was analyzed using the microsatellite marker SWC9 for the paternally expressed gene insulin‐like growth factor ‐2 (IGF2) and with single nucleotide polymorphisms (SNPs) for the gene maternally expressed 3 (MEG3). The cloned boars had high production of semen and were nearly equal in level of fertility to conventional pigs; they showed similar characteristics as naturally bred boars of the same strains. The expression of IGF2 was partially disturbed, but this disturbed expression was not linked to a change in developmental fate or reproductive performance. These results indicate that use of cloned boars could be highly effective for proliferation of pigs with desirable characteristics, preservation of genetic resources and risk reduction against epidemic diseases, such as foot‐and‐mouth disease, through storage of somatic cells as a precautionary measure for use in regenerating pig populations after a future pandemic.     

Physiological characteristics of blue sac disease in chum salmon alevins

Fisheries Science - Blue sac disease (BSD) in salmonids results in the abnormal accumulation of ascites fluid and can often lead to mass mortality. However, the symptoms and causes of BSD remain...