Three‐dimensional CT examination of the forefoot and hindfoot of the hippopotamus and tapir during a semiaquatic walking

Semiaquatic walking has resulted in the evolution of functional and morphological changes in various hoofed mammals, such as hippopotamus and Brazilian tapir. The biomechanics of skilful walking in wetlands or at the bottom of a waterbody involve the medio‐lateral opening and closing of the feet to effectively support and stabilize the body on soft ground and to reduce the water resistance during recovery stroke, respectively. We demonstrate that the opening and closing of the feet in hippopotamus and Brazilian tapir are mediated by the adduction and abduction of the most medial and lateral phalanges from the CT examination. The axial toes, metacarpals and metatarsals do not contribute to changes in the width and shape of the feet, unlike the medial and lateral toes. We suggest that this semiaquatic walking motion is derived from the original terrestrial mode of locomotion, in contrast to the highly functional swimming motion using webs or fins in morphologically modified feet and tail. From the present data we demonstrate that semiaquatic locomotion evolved due to the acquisition of adductor–abductor mobility in the phalanges of the most medial and lateral digits, as shown in hippopotamus and Brazilian tapir.     

Catalog of Micro-Tom tomato responses to common fungal, bacterial, and viral pathogens

Lycopersicon esculentum cultivar Micro-Tom is a miniature tomato with many advantages for studies of the molecular biology and physiology of plants. To evaluate the suitability of Micro-Tom as a host plant for the study of pathogenesis, Micro-Tom plants were inoculated with 16 well-known fungal, bacterial, and viral pathogens of tomato. Athelia rolfsii, Botryotinia fuckeliana, Oidium sp., Phytophthora infestans, and Sclerotinia sclerotiorum caused typical symptoms and sporulated abundantly on Micro-Tom. Micro-Tom was resistant to Alternaria alternata, Corynespora cassiicola, and Fusarium oxysporum. When Micro-Tom was inoculated with 17 isolates of Ralstonia solanacearum, many isolates induced wilt symptoms. Agrobacterium tumefaciens also was pathogenic, causing crown galls on stem tissue after needle prick inoculation. In Micro-Tom sprayed with Pseudomonas syringae pv. tomato, P. s. pv. tabaci, or P. s. pv. glycinea, bacterial populations did not increase, and yellow lesions appeared only on leaves sprayed with P. s. pv. tomato. Tomato mosaic virus, Tomato aspermy virus, and Cucumber mosaic virus systemically infected Micro-Tom, which developed symptoms characteristic of other cultivars of tomato after infection with the respective virus. These results indicated that Micro-Tom was generally susceptible to most of the important tomato pathogens and developed typical symptoms, whereas certain pathogens were restricted by either hypersensitive resistance or nonhost resistance on Micro-Tom. Therefore, an assortment of Micro-Tom–pathogen systems should provide excellent models for studying the mechanism of susceptible and resistant interactions between plants and pathogens.     

Development of wooden portal frame structures with improved columns

In Japan, the lifetime cycle of most housing lasts around 20–30 years. A governing factor in this respect is poor durability due to old-fashioned use of the house. As a solution of this problem, houses can be built with a skeleton structure that allows free partition of spaces by future owners. To develop the skeleton structure effectively, multistory frames with spans of 6 to 10 m are required. For this reason, attention has been focused on the behavior of multistory timber frame structures. In this article, two types of wooden portal frame structures are proposed. Both structures have improved vertical columns with short horizontal members glued in. The aim of this study was to investigate structurally effective solutions with these types of columns. The first type of the new structure changed the location of the moment-transmitting ductile connection with the improved columns. The second type of structure used an extended panel zone. Nine portal frame specimens were tested. The stiffness values were improved by around 1.7 and 3.5 times when compared with the control, and the strength was improved by around 1.25 and 1.45 times.     

云杉胶合木钢板斜螺钉连接的剪切性能研究

为准确评价斜螺钉连接钢 木节点的剪切性能,探明其受力机理,以云杉胶合木、钢板和自攻螺钉作为研究材料,测试不同荷载方向与受力情况下斜螺钉连接节点的承载性能,将试验数据与国外规范中的计算模型进行对比,提高了侧边钢板 胶合木(钢 木)斜螺钉连接节点承载性能的预测能力。结果表明:自攻螺钉与剪切面之间的角度变化对其在钢 木节点承受剪 压复合应力的承载力影响不明显,当偏转为剪 拉复合应力时,节点承载力明显增大,并在30°~45°获得最大值;剪 压复合应力时,现行EC5公式计算剪 压节点的极限承载力非常不安全;EC5的刚度预测结果在剪 压复合应力区和垂直剪切面钉入时,与试验值吻合度很高,但对剪 拉区节点的滑移模量没有预测性;将Tomasi模型应用于斜螺钉连接钢 木节点滑移模量理论计算时,在45°~90°时与试验值吻合度极高。单颗自攻螺钉的抗拔刚度计算节点滑移模量的方法极为有效,具有较高的借鉴意义。     

Bearing properties of engineered wood products I: effects of dowel diameter and loading direction

The embedment tests of laminated veneer lumber (LVL) with two moduli of elasticity (MOE; 7.8 GPa and 9.8GPa), parallel strand lumber (PSL), and laminated strand lumber (LSL) were conducted in accordance with ASTM-D 5764. The load-embedment relation for each of these engineered wood products (EWPs) was established. The directional characteristics of bearing strength (_e), initial stiffness (k _e), and effective elastic foundation depth were obtained from the tested results. The effective elastic foundation depth (=E/k _e,E = MOE), based on the theory of a beam on elastic foundation, was obtained from thek _e and MOE. An of 90° (perpendicular to the grain) was calculated by dividingE ₉₀ [MOE of 90° from the compression test, but MOE of 0° (E ₀), parallel to the grain, obtained from the bending test] byk _e90, the initial stiffness of 90°. This study aimed to obtain the bearing characteristics of each EWP, taking into consideration their anisotropic structures, for estimating the fastening strength of a dowel-type fastener. The relations between the bearing coefficients ( _e,k _e,) on the loading direction and dowel diameter were established from the load-embedment curves. Based on the results of the embedment test, tested EWPs showed different tendencies in all directions from wood and glued laminated timber.Part of this study was presented at the 49th Annual Meeting of the Japan Wood Research Society, Tokyo, April 1999     

Dynamic excitation and static loading tests of glulam lattice floor

A wooden lattice floor with high stiffness and damping capacity has been developed to solve noise problems in wooden apartment houses. The lattice floor consisted of Douglas fir glulam beams with inserted steel plate joints and drift pins. To examine the structural performance of the floor, dynamic excitation and static loading tests were conducted on the full size floor. The first and second order resonance frequencies of the floor were 13.5Hz and 27.0Hz, respectively. These frequencies are similar to the peak frequency of a conventional wooden floor and the combined floor fabricated from glued laminated timber and iron. The maximum static load of the floor was 127kN. The apparent flexural rigidity was less than half the value of several floors studied in the past. However, it is considered that the stiffness is improved by constructing panels and this floor has almost equivalent performance. Relative deflection was not affected by the loading history.Part of this study was presented at the International Wood Engineering Conference, New Orleans, October 1996.     

On mechanical behavior of traditional timber shear wall in Taiwan I: background and theory derivation

The objectives of this study were to explore the mechanical behavior of traditional timber shear walls in Taiwan and to propose a theoretical model to predict their lateral force resistance. An extensive field investigation was conducted, and the dimensions, tectonic detail, and materials used were recorded. The data collected were used as the reference for theoretical derivation and experimental design. In the theoretical model, the moment resistance of entire shear walls was derived from the contributions of the moment-resisting capacity supplied not only by embedment and friction action between board units and beams but also the dowel action of bamboo nails. Timber shear walls with various geometric conditions and material properties are considered. The theoretical model demonstrated in this study can be used to predict the mechanical behavior of timber shear walls and will be verified by experiments in our next article.     

Seasonal atopic dermatitis in dogs sensitive to a major allergen of Japanese cedar (Cryptomeria japonica) pollen

Three dogs were examined because of episodes of recurrent pruritic dermatitis in the spring, the season of Japanese cedar (Cryptomeria japonica, CJ) pollination in Japan. The dogs were shown to be sensitive to CJ pollen allergen using intradermal testing and antigen-specific IgE measurement. Fluorometric enzyme-linked immunosorbant assay (ELISA) showed increased concentrations of IgE specific to Cry j 1 and a negative result for Cry j 2 in the three dogs. The concentrations of IgE specific to Cry j 1 during the season of CJ pollination were higher than the concentrations found during the off-season in all the dogs, and the variation in the concentrations correlated with the variation in clinical signs. Peripheral blood mononuclear cells showed apparent proliferative responses to crude CJ pollen antigen and Cry j 1 during CJ pollination season. These findings indicated that Cry j 1 was the major allergen recognized by IgE and lymphocytes and resulted in the development of type I hypersensitivity to CJ pollen allergen in these atopic dogs.     

A bronchopulmonary artery fistula in a horse

A 24-year-old, Thoroughbred gelding presented with difficulty breathing for a few days and intermittent nose bleeding before dying. At necropsy, the bronchoesophageal artery and the bronchial artery that flowed into the left anterior lobe were tortuous and dilated, and it was found that dilated tortuous branches of the bronchial artery ran over the dorsal and ventral surfaces of the left anterior lobe. Histopathologically, an anastomosis between a muscular artery and an elastic artery were demonstrated, which were identified as bronchial and pulmonary arteries, respectively. Based on the gross and histopathological findings, a bronchopulmonary artery fistula was diagnosed. To the best of our knowledge, this is the first case report of a pulmonary vascular anastomosis in a horse.     

Developmental changes in pituitary–thyroid axis, and formation of gonads in leptocephali and glass eels of Anguilla spp.

SUMMARY: Pituitary, thyroid gland and gonads in leptocephali of Japanese eel Anguilla japonica (19.8–32.6 mm in total length), A. obscura (45.0 mm), and A. bicolor pacifica (49.5 mm) and those in glass eels of the Japanese eel were histologically and immunohistochemically examined in order to observe the developmental changes of these endocrine organs in the Anguillidae. The pituitary, consisting of adenohypophysis and neurohypophysis in Japanese eel leptocephali over 22.5 mm, did not contain thyroid stimulating hormone (TSH) immunoreactive cells. Such cells were, however, detectable in the more developed pituitaries of leptocephali of A. obscura and A. bicolor pacifica and in those of glass eels. Conversely, thyroxine (T₄)-immunoreactive thyroid follicles could be detected in all specimens, both leptocephalic and glass eel. Only in glass eels, gonads were found in the body cavity, and these gonads harbored one or two primordial germ cells (PGC) per cross-section. Our results indicate that thyroid hormones (TH) production started prior to TSH production, and that TSH and TH are both secreted during the metamorphosis from leptocephalus to glass eel. Therefore, it is plausible that the TSH–TH axis is involved in the metamorphosis from leptocephalus to glass eel, but not in the early growth from preleptocephalus to leptocephalus.