This study investigated the influence of temperature (4, 8 and 12°C) on development and survival of brown trout (Salmo trutta) fry. The three aims of this study were: (a) to propose a typology of malformations; (b) to compare malformation types between live and dead fry and (c) to establish relationships between temperature and malformation occurrences. It was found 20 single malformations and 39 combinations of two or more malformations. Comparison between dead and live fry at different development stages (hatching, emergence and first food intake) showed that malformations of yolk sac were predominant at hatching and then decreased, while malformations of skeleton or multiple malformations were higher thereafter. All dead fry, and only 14% of live fry were malformed. Dead fry were mainly characterized by yolk sac malformations and multiple malformations whatever the temperature. Live fry showed a higher rate of skeleton malformations at 12°C, and the different types of malformations were equally represented at two other temperatures (4 and 8°C). To conclude, it is suggested that some malformations (yolk sac at hatching, yolk sac associated with skeleton malformations at emergence and skeleton at first food intake or combinations of malformations at all stages)might be lethal as they were founding dead fry and that temperature influences differently the occurrence of malformations. 相似文献
Precise and accurate patient positioning is necessary when doing stereotactic radiosurgery (SRS) to ensure adequate dosing to the tumor and sparing of normal tissues. This prospective cross‐sectional study aimed to assess feasibility of a commercially available modified frameless SRS positioning system for use in veterinary radiotherapy patients with brain tumors. Fifty‐one dogs and 12 cats were enrolled. Baseline and verification CT images were acquired. The verification CT images from 32 dogs and five cats had sufficient images for fusion to baseline CT images. A rigid box‐based fusion was performed to determine interfraction motion. Forty‐eight dogs and 11 cats were assessed for intrafraction motion by cine CT. Seventy percent of dogs and 60% of cats had interfraction 3D vector translational shifts >1 mm, with mean values of 1.9 mm in dogs, and 1.8 mm in cats. In dogs muscle wasting was weakly correlated with translational shifts. The maximum angular interfraction motion observed was 6.3° (roll), 3.5° (pitch), and 3.3° (yaw). There was no correlation between angular interfraction motion and weight, brachycephaly, or muscle wasting. Fifty‐seven percent of dogs and 50% of cats had respiration‐related intrafraction motion. Of these, 4.5% of dogs and 10% of cats had intrafraction motion >1 mm. This study demonstrates the modified Brainlab system is feasible for SRS in dogs and cats. The smaller cranial size and difference in anatomy increases setup uncertainty in some animals beyond limits usually accepted in SRS. Image‐guided positioning is recommended to achieve clinically acceptable setup accuracy (<1 mm) for SRS. 相似文献
Cannibalism has been described in 390 teleost fish species belonging to 104 families. In rearing conditions, intra‐cohort cannibalism is one of the major bottlenecks during the early life stages of pikeperch (Sander lucioperca). This study aims to describe precisely the occurrence and the onset of cannibalism of this species during the first two post‐hatching months. In a first step, the cannibalistic behaviour was analysed through observations in three experiments. In each experiment, the number of cannibalistic cases was similar. From 14 to 48 days post‐hatching (dph), more than 60 % of prey ingestions were realized by tail‐first, but after 48 dph, the number of prey ingestions by head‐first increased. In a second step, the behavioural sequence exhibited to attack and to capture a conspecific was analysed, taking into account the size ratio between the cannibal and its prey. The behavioural sequence to capture was always the same, similar to a predatory sequence and it seems that the cannibal chose its prey about 10 s before attacking. Moreover, prey choice by a cannibal was based more on the size ratio between the cannibal and its prey than the previous activity of the potential prey. These new results could lead to solutions to decrease cannibalism in pikeperch rearing. 相似文献
Herbicide treatments in viticulture can generate highly contrasting mosaics of vegetated and bare vineyards, of which vegetated fields often provide better conditions for biodiversity. In southern Switzerland, where herbicides are applied at large scales, vegetated vineyards are limited in extent and isolated from one another, potentially limiting the distribution and dispersal ability of organisms.
Objectives
We tested the separate and interactive effects of habitat amount and fragmentation on invertebrate abundance using a multi-scale framework, along with additional environmental factors. We identified which variables at which scales were most important in predicting patterns of invertebrate abundance.
Methods
We used a factorial design to sample across a gradient of habitat amount (area of vegetated vineyards, measured as percentage of landscape PLAND) and fragmentation (number of vegetated patches, measured as patch density PD). Using 10 different spatial scales, we identified the factors and scales that most strongly predicted invertebrate abundance and tested potential interactions between habitat amount and fragmentation.
Results
Habitat amount (PLAND index) was most important in predicting invertebrate numbers at a field scale (50 m radius). In contrast, we found a negative effect of fragmentation (PD) at a broad scale of 450 m radius, but no interactive effect between the two.
Conclusions
The spatial scales at which habitat amount and fragmentation affect invertebrates differ, underpinning the importance of spatially explicit study designs in disentangling the effects between habitat amount and configuration. We showed that the amount of vegetated vineyards has more influence on invertebrate abundance, but that fragmentation also contributed substantially. This suggests that efforts for augmenting the area of vegetated vineyards is more beneficial for invertebrate numbers than attempts to connect them.
As a key parameter in the management of fish populations, individual growth rate (GR) variations were examined in the European eel (Anguilla anguilla; > 150 mm) using extensive mark–recapture surveys in the lotic habitats of two small rivers of western France: the Frémur, supposed to be saturated, and at the same latitude, the Oir with densities fivefold lower than those of the Frémur. In both systems, generalised linear models were used to test whether spatiotemporal factors such as dominant habitat type or local density affect GR variability. In the presumed unsaturated system, the Oir, GR variability is mainly explained by a set of habitat suitability drivers (density, dominant habitat type). In the Frémur, GRs appear independent of differences in habitat density or productivity. Below saturation, an increase in density will decrease the GR through intraspecific competition. At saturation, intraspecific competition reaches such high levels that regardless of eel density and productivity, the resources available by individual are similar throughout the system. In these circumstances, the effect of density on growth was presumed undetectable. Despite these contrasted results, mean GRs observed in both catchments were closed (~20 mm·year?1). This is an unexpected result as GR is expected to be higher in unsaturated systems. This similarity could be explained by the difference between the two systems in terms of: (i) sex ratio (the Frémur is dominated by male, whereas the female is dominant in the Oir), (ii) habitat type distribution or (iii) possible interspecific competition (important salmonid populations in the Oir). 相似文献
Medium density fibreboard (MDF) was produced from fibres treated with maleated polypropylene wax. The objectives of this study were to investigate the effect of fibre treatment with maleated polypropylene wax on the advancing and receding contact angle and wicking of MDF panels by the Wilhelmy plate method; to verify the chemical reactions occurring between fibres and maleated polypropylene wax by infrared spectroscopy, and to verify if there are relationships with the water absorption of panels. Three maleated polypropylene wax contents (0, 3, 5%) and two resin types (urea–formaldehyde, UF and melamine–urea–formaldehyde, MUF) were considered in this study. Our results showed that the treatment increased the advancing contact angle of panels bonded with UF resin. The receding contact angles of MDF panels produced from treated fibres with 5% maleated polypropylene wax content were also increased by the treatment. Also, the wicking was reduced by the treatment independent of the maleated polypropylene wax content. Reductions of the wicking were 59% for panels bonded with UF resin and 73% for panels bonded with MUF. Relationships between the wicking and water absorption were observed. Chemical analysis realized by infrared spectroscopy did not detect the presence of an esterification reaction between wood fibres and anhydride groups of the maleated polypropylene wax. This suggests, therefore, that an esterification reaction did not take place or that chemical modifications were so small that they are not visible by infrared spectroscopy. 相似文献
Summary The pressure membrane and pressure plate techniques were used to establish the moisture content-water potential (M-) relationship of red pine (Pinus resinosa Ait.) sapwood in desorption above the fiber saturation point. The moisture content-water potential relationship is required for the development of a model of drying considering the gradient of water potential as the driving force of moisture in wood. This relationship was established at 18, 56 and 85 °C for radial desorption. The results obtained demonstrate that water potential increases with temperature T at a given moisture content M. There is no significant variation of /T with temperature. Also, there is no plateau at intermediate moisture contents as was the case for the M- relationship of aspen sapwood established in a previous work. The effective integral and differential pore size distributions inferred from the M- relationship are also presented. The largest proportion of effective pore openings was found for a radius of 0.2 m. This value can be related to the pit membrane openings of red pine.This research project is currently supported by the Natural Sciences and Engineering Research Council of Canada under grant no. OGP0121954 相似文献
The radial pattern of both maximum ring density and ring area of 36 black spruce trees were used to determine the transition age from juvenile wood to mature wood. The data were obtained by X-ray densitometry and both segmented linear and polynomial regressions were used to point out the age of the juvenile wood boundary. Three stand densities (1,790, 2,700 and 3,400 stems/ha) and three sampling heights (2.4, 5.1 and 7.8 m) were studied. Although maximum ring density and ring area presented similar radial patterns, they gave two significantly different results of transition ages. The maximum ring density over-estimated the transition age (17.6 years) in contrast to ring area (14 years). The results show that the transition from juvenile wood to mature wood occurred after 12 years at 7.8 m (versus 13.1 years at a height of 5.1 m, and 17.6 years at 2.4 m). Although transition age occurred later in the high stand density group (21 years), the difference was not significant between the three stand density groups. Nevertheless, transition age remains difficult to determine since no standard definition exists. The transition occurs over years, and most probably a transition wood exists between juvenile wood and mature wood. Estimation of the juvenile wood proportion in volume shows that it remains constant along the stem and it increases with stand density. 相似文献
Market-oriented production of gardening crops and cassava (Manihot utilissima) in the dry season is an increasingly frequent practice in Ségou, Mali. Traditionally, these crops are protected from roaming
livestock with the help of dead fences. In order to provide a sustainable alternative to dead fences, the International Centre
for Research in Agroforestry (ICRAF) began promoting the use of live fences, living trees planted closely together around
a field plot. This study was conducted with the first farmers to use these live fences. These farmers expressed satisfaction
with the protection offered by the trees and their ability to provide a variety of medicinal, economic, and food products.
The form of land tenure, the social status of farmers within their families, and the availability of labour seem to be important
factors in the decision to test the live fence. This raises questions about the accessibility of this technique and its possible
contribution to the social and economic differentiation of its users.
This revised version was published online in June 2006 with corrections to the Cover Date. 相似文献
The amount of UF resin penetration into fibers, used for the production of medium density fiberboard (MDF), is unknown. To
evaluate the relationship between resin viscosity and resin penetration depth, an experimental procedure involving confocal
laser scanning microscopy (CLSM) and a Toluidine Blue O staining system was performed. The results indicate that CLSM in combination
with a Toluidine Blue O staining system is a good way to characterize UF resin penetration into wood fibers. The main penetration
direction is toward the fiber lumen. For wet fibers, whose moisture content is about 88%, the effect of resin viscosity with
a range of 80 cps – 340 cps on penetration is very similar, with all adhesives reaching or almost reaching the fiber lumen
after 60 min at room temperature. For MDF industrial samples, the highest depth of penetration of the adhesive was attained
in the second dryer stage. After the second dryer stage, the resin penetration into the fiber did not increase. 相似文献