Modelling optimal timing and frequency of insecticide sprays for knockdown in preparation for other control measures

A modelling investigation was conducted into optimizing the number of sprays and inter-spray interval to reduce an insect population to a low level, for example, prior to pheromone trapping or the release of sterile males. The model population was age-structured and density-dependent. If spray mortality is 100% for each spray, then the ideal spraying schedule is easily determined from the durations of the various life stages. For spray mortality of less than 100%, a simulation was used to determine optimal spraying schedules. Relative length of the larval period, fertility rate and age to first oviposition were found to be the most important biotic parameters for this determination. Their importance is magnified as spray mortality decreases. The stage targeted by sprays and the percent mortality caused by each spray are also important in determining the required number of sprays. Using medfly (Ceratitis capitata Wiedmann) biotic parameters as an example when the spray targets adults, it appeared that neither the stage at which density-dependent mortality takes effect, nor the form of the adult survivorship curve are important in determining the optimal spray schedule.     

Landscape-level naturalness of conservation easements in a mixed-use matrix

Context

With underrepresentation of habitats in publicly protected areas, attention has focused on the function of alternative land conservation mechanisms. Private conservation easements (CEs) have proliferated in the United States, yet assessing landscape-level function is confounded by varying extent, resolution, and temporal scale.

Objectives

We developed and tested an assessment tool to evaluate interacting spatial, social, and environmental attributes of easements relative to the degree of human modification (HM). We hypothesized that on both private and public conservation properties HM would be lower than on non-conserved parcels, and that for fine-scale features (most CEs), the level of HM would be driven by the variables used to create the coarser scale HM measure.

Methods

Variation in HM between private, public, and non-conserved was tested via pairwise parcel sampling. Composition was evaluated using multiple geographic bounds and edge characteristics. We assessed both environmental and social predictors using multinomial logistic regression.

Results

Privately conserved lands did not differ significantly from non-conserved lands. Publicly conserved lands had lower HM than both privately conserved and non-conserved lands. Edge contrast was similar between private and matched non-conserved patches. The level of HM was not driven by distance to roads, or by elevation in this mixed-use setting.

Conclusions

Variation in tests for differences, land characteristics, and HM variables confirmed the significantly lower HM of publicly protected lands, and opens the question as to naturalness of easements in some contexts. CEs in this location may be representative of the mixed rural-forested landscape instead of more natural land cover.

     

Mitigating nitrous oxide emissions from agricultural soils by precision management

Nitrous oxide (N₂O) emissions make up a significant part of agricultural greenhouse gas emissions. There is an urgent need to identify new approaches to the mitigation of these emissions with emerging technology. In this short review four approaches to precision managements of agricultural systems are described based on examples of work being undertaken in the UK and New Zealand. They offer the opportunity for N₂O mitigation without any reduction in productivity. These approaches depend upon new sensor technology, modeling and spatial information with which to make management decisions and interventions that can both improve agricultural productivity and environmental protection.     

Measuring fish catch and consumption: Practical methods for small‐scale fisheries based on length as an alternative to weight‐based approaches

Small‐scale fisheries are recognised as making important contributions to nutrition and economic development despite a lack of accurate quantitative information on catches and consumption. While direct measurement remains the most appropriate way of collecting such data, it is impractical at large scales. Instead, household surveys based upon informant recall of fish caught and/or consumed are frequently used. However, the accuracy of weight recall by informants (even over short recall periods) has not been established. Using data from household surveys, the accuracy and precision of catch and consumption estimates derived from: (a) asking informants to recall weights of fish caught and (b) asking respondents to recall lengths of fish caught and converting to weight were tested. Length‐based methods, using visual aids to assist recall, were more accurate, precise and correctable. These methods could be useful for catch estimation, especially where fish are processed, sold or consumed shortly after capture.     

Isolating the effect of soil properties on agricultural soil greenhouse gas emissions under controlled conditions

Agricultural soils are important sources of greenhouse gases (GHGs). Soil properties and environmental factors have complex interactions which influence the dynamics of these GHG fluxes. Four arable and five grassland soils which represent the range of soil textures and climatic conditions of the main agricultural areas in the UK were incubated at two different moisture contents (50 or 80% water holding capacity) and with or without inorganic fertiliser application (70 kg N ha⁻¹ ammonium nitrate) over 22 days. Emissions of N₂O, CO₂ and CH₄ were measured twice per week by headspace gas sampling, and cumulative fluxes were calculated. Multiple regression modelling was carried out to determine which factors (soil mineral N, organic carbon and total nitrogen contents, C:N ratios, clay contents and pH) that best explained the variation in GHG fluxes. Clay, mineral N and soil C contents were found to be the most important explanatory variables controlling GHG fluxes in this study. However, none of the measured variables explained a significant amount of variation in CO₂ fluxes from the arable soils. The results were generally consistent with previously published work. However, N₂O emissions from the two Scottish soils were substantially more sensitive to inorganic N fertiliser application at 80% water holding capacity than the other soils, with the N₂O emissions being up to 107 times higher than the other studied soils.     

Assessing the sublethal impacts of anthropogenic stressors on fish: An energy‐budget approach

Fish are increasingly exposed to anthropogenic stressors from human developments and activities such as agriculture, urbanization, pollution and fishing. Lethal impacts of these stressors have been studied but the potential sublethal impacts, such as behavioural changes or reduced growth and reproduction, have often been overlooked. Unlike mortality, sublethal impacts are broad and difficult to quantify experimentally. As a result, sublethal impacts are often ignored in regulatory frameworks and management decisions. Building on established fish bioenergetic models, we present a general method for using the population consequences of disturbance framework to investigate how stressors influence ecologically relevant life processes of fish. We partition impact into the initial energetic cost of attempts to escape from the stressor, followed by the energetic impacts of any injury or behavioural change, and their consequent effects on life processes. As a case study, we assess the sublethal effects of catch and release angling for the European sea bass (Dicentrachus labrax, Moronidae), a popular target species for recreational fishers. The energy budget model described is not intended to replace existing experimental approaches but does provide a simple way to account for sublethal impacts in assessment of the impact of recreational fisheries and aid development of robust management approaches. There is potential to apply our energy budget approach to investigate a broad range of stressors and cumulative impacts for many fish species while also using individual‐based models to estimate population‐level impacts.     

Forage legumes in grass pastures in tropical Brazil and likely impacts on greenhouse gas emissions: A review

Beef cattle producers seldom use fertilizers for their pastures in tropical regions of Brazil. Slowly, this is changing but because of the need for repeated applications, N fertilizer is rarely applied. The introduction of a forage legume is an appropriate solution for this problem, but until recently adoption has been very low as the legumes generally have not persisted in the sward. We report research on how grazing management can affect the persistence of stoloniferous legumes in pastures of Brachiaria spp. and the problems of establishing and maintaining crown-forming legumes such as Stylosanthes spp. With suitable management, milk or bovine carcass yields can be equal or greater from mixed than from grass-alone pastures fertilized with 120 or 150 kg Nha^-1 year⁻¹. In addition to savings in CO₂ emissions from fossil fuels for the production and distribution of N fertilizers, nitrous oxide emissions from cattle excreta and legume residues are lower than those from N-fertilized brachiaria grass monocultures. Other studies indicate that enteric methane emissions from cattle may be mitigated when forage legumes are included in their diet. The use of forage legumes in mixed pastures for tropical regions is emerging as a feasible strategy to keep meat and milk production at acceptable levels with reduced greenhouse gas emission rates.     

Regional variability in landscape effects on forest bird communities

Landscape Ecology - Functional responses to landscape heterogeneity are context-dependent, hampering the transferability of landscape-scale conservation initiatives. Japan provides a unique...     

Mechanical behavior of nylon 66 tyre cord under monotonic and cyclic extension: Experiments and constitutive modeling

Many industrial products are made of cord-rubber composite materials. Their mechanical behavior not only depends on rubber but also depends on cord. Nylon 66 cord is one of the most important reinforcement in these products. This paper research the mechanical behavior of nylon 66 cord under various load cases. A series of experiments were carried out to obtaining stress-strain curves under different load cases. Complex changes of the modulus and Mullins effect can be found in monotonic and cyclic tension, respectively. Mechanism of these behaviors has been analyzed considering both the twisted structure and material. A phenomenological constitutive model, accounting for different loading conditions, has been firstly proposed base on strain energy density function and damage mechanics method. The proposed model has been verified by comparing the predicted results with experimental data. It has been found that the proposed model predicted the stress-strain curves that were consistent with the experimental data. The proposed model can be implemented in finite element software for engineering design and application.     

Interactions of baseflow habitat constraints: Macroinvertebrate drift,stream temperature,and physical habitat for anadromous salmon in the Calapooia River,Oregon

1. The Calapooia River in western Oregon supports a small winter steelhead trout (Oncorhynchus mykiss) population and historically supported spring Chinook salmon (Oncorhynchus tshawytscha). Early timber harvesting removed the riparian forest, and log transportation practices simplified the channel. Those disturbance legacies continue to affect fish habitat by limiting shade and channel complexity, complicating conservation efforts.
2. To evaluate juvenile salmonid rearing potential, macroinvertebrate drift, thermal regime and physical habitat were measured at eight sites in 24 km of the upper river during late summer baseflow.
3. Overall physical habitat was simple, with few functioning instream structures or pools. During the 22‐day drift study, flows declined and maximum site stream temperatures ranged from 23.1°C at the lower end to 16.4°C 24 km upstream.
4. Macroinvertebrate drift concentrations ranged from 0.7–13.7 ind. m^?3 with biomasses from 0.02–1.23 mg m^?3. Drift concentration biomass was higher upstream (P  = 0.006) than downstream and declined overall (P  < 0.001) during the study. Drift biomass was dominated by five taxon groups – Baetis tricaudatus, Calineuria californica, Hesperoperla pacifica, Simulium spp., and Chironomidae, which were 65% of total biomass. During twilight, total biomass and biomass of B. tricaudatus, Simulium spp., and Chironomidae (both larvae and adults) were higher.
5. Total drift declined dramatically over the study period owing to decreases in drift concentration and a 58% decline in discharge, greatly reducing overall drift and available food resources for juvenile‐rearing salmonids.
6. The upper catchment, both with cooler temperatures and higher food availability, provided the best conditions for juvenile anadromous salmonids to survive late summer conditions. Conservation consequences of climate change‐induced alterations in flow and temperature may further affect habitat quality for juvenile salmonids in this catchment in the coming decades.