Artificial fertilization and generating families for a selective breeding programme of large yellow croaker ( Larimichthys crocea )

Large yellow croaker is an important marine aquaculture species in China. The aim was to determine an appropriate protocol of artificial fertilization for family construction in the breeding programme based on two trials. In trial 1, luteinizing hormone-releasing hormone A3 (LHRHA3) was injected once, with a dosage of 2 μg/kg for females and 1 μg/kg for males. The latency time was in the range of 30–34 h. The maturation stage was checked by extracting a few eggs with a Pasteur pipette. The fertilization rate and hatching rate were 27 and 52%, respectively. The percentage of females with spawning difficulties was 30%. In trial 2, the females were injected LHRHA3 twice: with a first dose of 0.8 μg/kg and a second dose of 2 μg/kg, at an interval of 10 h, whereas the males were still injected once. The latency time was in the range of 29.5–35 h, determined by only observing courtship behaviour of males. The females with spawning difficulties decreased to 10%, and the fertilization rate and hatching rate also improved to 41 and 62%, respectively.     

Growth and mortality in underplanted tree seedlings in response to variations in canopy closure of Norway spruce stands

Six broadleaved tree species and Picea abies (L.) Karst. wereplanted under spruce plantations of varying densities, in Sweden.Treatments included control (994 stems ha^–1), dense (538stems ha^–1), sparse (294 stems ha^–1) and gap (0stems ha^–1) overstory treatments. There was an increasein height and diameter growth from control to sparse overstorytreatment of all underplanted tree species except for ash (Fraxinusexcelsior L.) and Norway maple (Acer platanoides L.). Site conditionsmay have hampered the growth of these species, as well as wildcherry (Prunus avium L.). Both oak (Quercus robur L.) and sprucehad greater growth in the gap treatment, relative to the othertreatments. Insecticide application did not influence seedlinggrowth or survival. The performance of beech (Fagus sylvaticaL.), lime (Tilia cordata Mill.), spruce and oak was consistentwith shade tolerance ranking. Beech and lime had a very highsurvival rate, even under the densest canopy. The growth andmortality of ash, maple and wild cherry differed significantlyfrom what was expected. This experiment demonstrated significantvariation in interspecific growth and mortality between sevenplanted tree species in relation to canopy density. Correctsite and species selection is crucial when underplanting inshelterwood systems.     

Herbivory by the pine weevil (Hylobius abietis L.) and short-snouted weevils (Strophosoma melanogrammum Forst. and Otiorhynchus scaber L.) during the conversion of a wind-thrown Norway spruce forest into a mixed-species plantation

The influence of above-ground insect herbivory and other agents of damage to seedlings was studied in a field experiment. Nine different tree species were planted in each of five randomised blocks. The species were: Alnus glutinosa (L.) Gaertner, Betula pendula Roth., Fagus sylvatica L., Fraxinus excelsior L., Larix eurolepis Henry, Picea abies (L.) Karst., Prunus avium L., Quercus robur L. and Tilia cordata Mill. The seedlings were monitored through the 2000–2002 growing seasons. Pine weevils (Hylobius abietis L.) fed significantly more on Norway spruce seedlings than on all other tree species. The following rough preference order was obtained: Norway sprucelarch>birch, beech, oak>cherry>alder, ash, lime. Thus, during the conversion of single-species coniferous plantations to mixed-species broadleaved stands, the use of costly insecticides against pine weevil is not required. Short-snouted weevils (e.g. Strophosoma melanogrammum Forst. and Otiorhynchus scaber L.) and other insects caused leaf and needle area loss primarily during the first growing season.     

Evidence of Lower Productivity in Long Term Limed Lakes as Compared to Unlimed Lakes of Similar pH

Ecosystem development in lime-treated waters in Sweden has been followed since 1989 in a programme for integrated studies of the effects of liming acidified waters (ISELAW). Observations after prolonged liming (>10 y) indicate a phosphorus depletion in the limed lakes which contrasts to the increased phosphorus supply often following within the initial years after lime treatment. After prolonged liming, the levels of total phosphorus are lower as compared to neutral reference lakes at identical TOC, and the phosphorus/TOC -ratio is consequently lower in limed lakes. Depletion of dissolved inorganic nitrogen during the summer is also lower in limed as compared to neutral reference lakes. Phytoplankton biomass and species number also lower in the limed lakes as compared to unlimed neutral references. Furthermore the bacterial number per unit TOC is lower in the long term limed lakes, possibly as a result of phosphorus limitation. As to the higher trophic levels, the benthic soft-bottom fauna of limed lakes (specifically the sublittoral fauna) is poorer in terms of species diversity and abundance. Also fish community composition indicates lower productivity in the limed lakes. Taken together there is thus evidence that the long term limed lakes have a lower trophic level than reference lakes.     

Molecular tracing confirms that infection with infectious pancreatic necrosis virus follows the smolt from hatchery to grow‐out farm

Infectious pancreatic necrosis (IPN) is an important restraint to production of salmonids in aquaculture globally. In order to implement efficacious mitigation strategies for control of this disease, it is important to understand infection routes under current production systems. IPN virus has been shown to be transmitted vertically in Rainbow trout, from broodstock to fingerlings in hatcheries, and there is circumstantial evidence suggesting that vertical transmission can also occur in Atlantic salmon, in addition to horizontal transmission between grow‐out fish in farms. In this study, we show that the smolt carries infection with IPN from hatchery to the marine farm. We do this by comparing sequences from fish groups taken both in hatcheries and on corresponding marine grow‐out farms. We use statistical analysis to prove that sequences obtained from the same fish group in both hatchery and marine farm are more similar than sequences obtained from random fish groups on hatcheries and marine farms.     

Structure liming enhances aggregate stability and gives varying crop responses on clayey soils

It has been suggested that liming can improve soil structure and thereby decrease losses of particles and associated nutrients. In this study, two types of structure lime, slaked lime (Ca(OH)₂) and a mixed product of calcium carbonate (CaCO₃) and slaked lime (Ca(OH)₂), were applied at three different rates in field trials on clayey soils (23%–40% clay). A combination of primary tillage and structure liming was also studied, in a split-plot trial on a clayey soil (25% clay). Aggregate (2–5?mm) stability, measured as reduction in turbidity (which is strongly correlated with losses of particulate phosphorus), was significantly increased with the highest application rates of both structure lime products. Aggregate size distribution was also improved with structure lime, creating a finer tilth in the seedbed. Yield response to structure lime was not consistent, with both negative and positive responses over the four-year study period. Positive yield responses can possibly be attributed to the finer tilth preventing evaporation in two dry growing seasons. Negative yield responses were probably an effect of impaired phosphorus availability associated with limited precipitation in May-July in 2011 and 2013. Two years after liming, soil pH levels were significantly elevated in plots with the highest application rate of structure lime, whereas no significant increases were found three years after liming. However, a lingering effect of liming was still detectable, as manganese concentration in barley grain was significantly lower in plots with the highest application rates of both structure lime products in the fourth study year. These results indicate that structure liming can be used as a measure to mitigate phosphorus losses from clayey soils, thereby preventing eutrophication of nearby waters. However, the yield response was varying and unpredictable and thus further investigations are needed to determine the circumstances in which field liming can act efficiently not only to prevent phosphorus losses, but also to ensure consistent yield increases.     

Promoting sustainable intensification in precision agriculture: review of decision support systems development and strategies

Precision agriculture provides important issues toward a more sustainable agriculture. Many farmers have the necessary technology to operate site-specifically, but they do not use it in practice, and thus available information and communications technology (ICT) systems are not used to their full potential. This paper addresses how to reduce the so-called “problem of implementation”, based on the knowledge that participatory approaches during the design and development process is one of the most important factors to frame technology adoption. The development of sustainable ICT systems through theories and methodologies from the fields of human computer interaction and user-centered design (UCD) is presented and an ongoing Swedish project for development of an agricultural decision support system (AgriDSS) for nitrogen fertilization is used as an example to frame the issue. The overreaching aim is to develop AgriDSSs that are sustainable in design as well as through design by stressing the importance of participatory approaches for the successful development of AgriDSSs. The Swedish project has the intention to apply a UCD approach, and some pitfalls on starting to use this way of working is identified as well as some suggestions on how to reduce them through co-learning processes. Despite the challenges presented in this paper, ICT can contribute significantly to long-term sustainable development. Thus, several competences and scientific disciplines need to act in concert to help develop a sustainable development of agriculture via a transdisciplinary approach that can make an impact on society at many levels.     

Susceptibility of European bread and durum wheat cultivars to Tilletia indica

Representative European wheat cultivars were tested under quarantine containment for their susceptibility to Tilletia indica, the cause of Karnal bunt of wheat. Fifteen winter and 15 spring wheat ( Triticum aestivum ) and 11 durum wheat ( Triticum durum ) cultivars were inoculated by boot injection just prior to ear emergence to test their physiological susceptibility. Selected cultivars were then re-tested by spray inoculation after ear emergence to determine their morphological susceptibility, which is a better predictor of field susceptibility. At maturity, the ears and seeds were assessed for incidence and severity of disease. For the physiological susceptibility tests, 13/15 winter wheat cultivars were infected and the percentage of infected seeds ranged from 1 to 32%. For spring cultivars, 13/15 cultivars were infected and the percentage of infected seeds ranged from 1 to 48%. For the durum cultivars, 9/11 were infected and the percentage of infected seeds ranged from 2 to 95%. Across all cultivars, 35/41 were infected. Based on historical Karnal bunt susceptibility categories using coefficients of infection, one cultivar was classed as highly susceptible, three as susceptible, 11 as moderately susceptible, 20 as resistant and only six as highly resistant. The spray-inoculation morphological susceptibility tests broadly confirmed the physiological susceptibility results, although lower levels of infection were observed. Overall, the range of susceptibility was similar to that found in cultivars grown in Karnal bunt affected countries. The results demonstrate that European wheat cultivars are susceptible to T. indica and thus could potentially support the establishment of T. indica if introduced into Europe.     

Effects of granivorous rodents on direct seeding of oak and beech in relation to site preparation and sowing date

Planting bare-rooted seedlings is a rather expensive method to regenerate oak (Quercus robur) and beech (Fagus sylvatica). Direct seeding could reduce artificial regeneration costs substantially, but the method currently suffers from a number of problems, one of which is seed consumption by rodents. In the present study clear-cut areas in southern Sweden were prepared using one of four different mechanical site preparation methods – disc trenching, patch scarification, topsoil removal or mounding – then manually sown with acorns and beech nuts. Acorns were sown in May and July 2006, and both acorns and beech nuts were sown in May 2007. Three years following sowing, best seedling establishment from viable acorns, 60–70%, was achieved after sowing in mounds in May, and the subsequent survival reached 90–100%. After the first growing season for beech, both seedling establishment and subsequent survival was lower than for oak, which coincides with a higher number of lost beech nuts at the excavation to investigate the fate of seeds. Granivorous rodents (Apodemus flavicollis, A. sylvaticus, Mus musculus, and Myodes glareolus) were live-trapped more frequently in the vicinity of slash piles compared to other micro-site features, such as uprooted stumps, snags and stones. In 2006, no connection was found between number of rodents captured and proportion of lost seeds, while in 2007 the two were in good accordance. No clear relationship was found between number of captured rodents, vegetation cover class and mechanical site preparation method. More rodents were captured in 2007 than in 2006, and there was an increase in captures from spring until late summer/autumn for both years, which was mirrored in the seedling establishment result from the three different times of sowing. Based on experiences from the present study the recommendation for successful direct seeding of oak on clear-cuts is a combination of mounding site preparation, removal of slash and sowing in May rather than July. However, the results indicate that successful direct seeding of beech is more difficult to achieve.