Finding suitable growth models for turbot (Scophthalmus maximus L.) in aquaculture 1 (length application)

Growth data of two different commercial turbot (Scophthalmus maximus) strains reared in recirculating aquaculture systems were analysed with the aim to determine the most suitable model for turbot. To assess the model performance three different criteria were used: (1) The mean percentage deviation between the estimated length and actual length; (2) the residual standard error with corresponding degrees of freedom and (3) the Akaike information criterion. The analyses were carried out for each strain separately, for sexes within strains and for a pooled data set containing both strains and sexes. We tested a pre‐selection of six models, containing three to four parameters. Models were of monomolecular shape or sigmoid shape with a flexible point of inflection including the special case of monomolecular shape in defined cases of their parameters. The 4‐parametric Schnute model achieved best fit in 62% of all cases and criteria tested, followed by the also 4‐parametric generalized Michaelis–Menten equation in 48% and the 4‐parametric Janoschek model (38%). The von Bertalanffy growth function achieved only 29%, Brody 24% and a new flexible function 19% best fit. In a 1–1000 day growth‐simulation sigmoid shaped curves were produced by the Schnute model in 71% of cases. The Janoschek and the Michaelis–Menten model each produced sigmoid curves in 57% of all cases. This indicates that a flexible 4‐parametric function reflects the growth curve of turbot the best and that this curve is rather sigmoid than monomolecular shaped.     

Is N‐feedback involved in the regulation of nitrogenase activity in Medicago truncatula?

To determine whether senescing leaves provoke an active nitrogen (N) remobilization that results in the reduction of nitrogenase activity, 60% of Medicago truncatula lower leaves were either darkened or individually excised for two weeks. Although a considerable amount of N was remobilized, N₂ fixation activity was found to be increased to maintain the N source/sink balance, indicating an absence of the negative N‐feedback regulation of nitrogenase activity in the senescing M. truncatula.     

田间试验的空间变异性及其统计控制

利用空间相关模型和传统方差分析模型对小麦和玉米3个田间试验产量数据进行了拟合与分析。结果表明，3个试验都显著存在空间变异，空间变异方差占据剩余变异方差的83.5%~0.4%；相对于传统随机完全区组分析法，空间相关模型法效应比较的标准误平均降低18.4%~14.2%，分析相对效率平均为1.50~1.36，因而比区组控制空间变异更有效；不同空间相关模型分析的结果呈现出一定的差异。建议利用空间相关模型分析田间试验，并利用Akaike信息准则（AIC）进行最佳空间相关模型选择。     

Development and application of functional markers in maize

Summary Functional markers (FMs) are derived from polymorphic sites within genes causally involved in phenotypic trait variation (Andersen, J.R. & T. Lübberstedt, 2003. Trends Plant Sci 8: 554–560). FM development requires allele sequences of functionally characterized genes from which polymorphic, functional motifs affecting plant phenotype can be identified. In maize and other species with low levels of linkage disequilibrium, association studies have the potential to identify sequence motifs, such as a few nucleotides or insertions/deletions, affecting trait expression. In one of the pioneering studies, nine sequence motifs in the dwarf8 gene of maize were shown to be associated with variation for flowering time (Thornsberry, J.M., M.M. Goodman, J. Doebley, S. Kresovich, D. Nielsen & E.S. Buckler, 2001. Nat Genet 28: 286–289). Proof of sequence motif function can be obtained by comparing isogenic genotypes differing in single sequence motifs. At current, the most appropriate approach for this purpose in crops is targeting induced local lesions in genomes (TILLING) (McCallum, C.M., L. Comai, E.A. Greene & S. Henikoff, 2000. Nat Biotechnol 18: 455–457). In central Europe, maize is mainly grown as forage crop, with forage quality as major trait, which can be determined as proportion of digestible neutral detergent fiber (DNDF). Brown midrib gene knock out mutations have been shown to be beneficial for forage quality but disadvantageous for overall agronomic performance. Two brown midrib genes (bm1 and bm3) have been shown to be involved in monolignol biosynthesis. These two and additional lignin biosynthesis genes have been isolated based on sequence homology. Additional candidate genes putatively affecting forage quality have been identified by expression profiling using, e.g., isogenic bm lines. Furthermore, we identified an association between a polymorphism at the COMT locus and DNDF in a collection of European elite inbred lines.     

Taxonomy and evolution of cultivated plants: Literature review 1980/1981

Summary Important papers on taxonomy and evolution of cultivated plants published in 1980 and 1981 were compiled and briefly discussed.

---

Taxonomie und Evolution der Kulturpflanzen: Literaturübersicht 1980/1981

Zusammenfassung Wichtige Arbeiten über Taxonomie und Evolution der Kulturpflanzen aus den Jahren 1980 und 1981 wurden zusammengestellt und kurz kommentiert.

---

: 1980–1981 .

, 1980 1981 . .

---

---

Herrn Prof. Dr. Dr. h. c. mult. H.Stubbe aus Anlaß der 80. Wiederkehr seines Geburtstages gewidmet.     

Entwicklung der Niederschlags-Deposition von Schwermetallen in West-Deutschland. 1. Blei und Cadmium

Development of heavy-metal deposition by precipitation in West Germany. 1. Lead and cadmium Between 1984 and 1993 the deposition of Pb and Cd with bulk precipitation was measured on 25 open field sites in 4 German federal states. The absolute amount of Pb and Cd deposition varies according to field sites and annual precipitation. In all studied areas, however, Pb deposition via bulk precipitation decreased significantly during the observation period. Considering all research areas under study, the average Pb deposition with bulk precipitation fell from 142 g ha^?1 in 1984 to 31 g ha^?1 in 1993 (r = ?0.934***). This decrease in Pb deposition correlates with the prognosticated decline in Pb emissions that occurred in Germany during the same time period owing to the introduction of unleaded motor fuels in 1984. Average Cd deposition on all research stations fell from 3.4 g ha^?1 in 1984 to 2.0 g ha^?1 in 1993 (r = ?0.900***). However, in contrast to Pb, the reduction of Cd deposition was significant only at 11 of 25 research stations. The reduction in Cd deposition with precipitation is substantially lower than the reduction in Cd emissions prognosticated.     

Water acidification by air pollutants in the Federal Republic of Germany

In the Federal Republic of Germany (FRG), airborne pollutants are leading to an increased rate of acidification of aquatic systems. In particular, the upper reaches of rivers and obligotrophic lakes in low-carbonate areas are affected. These areas are a minority of the total number of waterways, but are of great importance for environmental protection. Water acidification cannot be viewed as an isolated issue. In forested areas, it is associated with damage to the entire ecosystem. In lakes and streams, one of the most significant effects of water acidification is fish mortality; several bodies of water in which fish were once plentiful are now devoid of fish. With increasing acidification of the ground water, drinking-water supply problems may also be expected, All measures which can be taken to prevent the entry of pollutants into aquatic systems are preferred to those which merely treat the symptoms of acidified aquatic systems (e.g. addition of lime). The Federal Environmental Agency therefore considers the reduction of air pollutants to be the most effective solution to the problem of acidified of aquatic systems.     

Soil‐ and plant‐based nitrogen‐fertilizer recommendations in arable farming

Under‐ as well as overfertilization with nitrogen (N) will result in economic loss for the farmer due to reduced yields and quality of the products. Also from an ecological perspective, it is important that the grower makes the correct decision on how much and when to apply N for a certain crop to minimize impacts on the environment. To aggravate the situation, N is a substance that is present in many compartments in different forms (nitrate, ammonium, organic N, etc.) in the soil‐plant environment and takes part in various processes (e.g., mineralization, immobilization, leaching, denitrification, etc.). Today, many N‐recommendation systems are mainly based on yield expectation. However, yields are not stable from year to year for a given field. Also the processes that determine the N supply from other sources than fertilizer are not predictable at the start of the growing season. Different methodological approaches are reviewed that have been introduced to improve N‐fertilizer recommendations for arable crops. Many soil‐based methods have been developed to measure soil mineral N (SMN) that is available for plants at a given sampling date. Soil sampling at the start of the growing period and analyzing for the amount of NO ‐N (and NH ‐N) is a widespread approach in Europe and North America. Based on data from field calibrations, the SMN pool is filled up with fertilizer N to a recommended amount. Depending on pre‐crop, use of organic manure, or soil characteristics, the recommendation might be modified (±10–50 kg N ha^–1). Another set of soil methods has been established to estimate the amount of N that is mineralized from soil organic matter, plant residues, and/or organic manure. From the huge range of methods proposed so far, simple mild extraction procedures have gained most interest, but introduction into practical recommendation schemes has been rather limited. Plant‐analytical procedures cover the whole range from quantitative laboratory analysis to semiquantitative “quick” tests carried out in the field. The main idea is that the plant itself is the best indicator for the N supply from any source within the growth period. In‐field methods like the nitrate plant sap/petiole test and chlorophyll measurements with hand‐held devices or via remote sensing are regarded as most promising, because with these methods an adequate adjustment of the N‐fertilizer application strategy within the season is feasible. Prerequisite is a fertilization strategy that is based on several N applications and not on a one‐go approach.