The release and uptake of metals from potential biofilm inhibition products during spiny lobster (Sagmariasus verreauxi,H. Milne Edwards 1851) culture

Zinc (Zn) and copper (Cu) are strong inhibitors of bacterial biofilms in aqueous solutions, but are known toxins of crustaceans. A new metal application method; cold‐sprayed metal embedment, known to modulate metal release, was tested for its applications in crustacean larval culture systems. Cold‐spray technology allows metal particles to bond to plastics, while modulating metal ion release and biocide activity to the substrate boundary. In this study, Eastern spiny lobster (Sagmariasus verreauxi) larvae (phyllosoma) were cultured in the presence of cold‐sprayed Zn and Cu metal surfaces. Metal loss was monitored gravimetrically on embedded surfaces, assessment of water ion concentrations and analysis of phyllosoma body content were undertaken. Phyllosoma moulting, deformity and mortality patterns were monitored. Cold‐sprayed Zn‐ and Cu‐embedded surfaces were depleted with losses of 0.69% and 31.2% noted respectively. Culture water concentrations of these metals were elevated and accumulation by phyllosoma occurred. Water Zn concentrations of 18.5 μg L^?1 were associated with chronic eyestalk moult deformities; the first report of Zn causing a non‐lethal moult deformity in crustacean larvae. The Cu surface lost a third of its metal mass with a water concentration of 40 μg L^?1 causing acute toxicity and localization of composite granules in the midgut gland. Cu associated mortality was noted by Day 2 of culture with a LD 50 experienced by Day 9. Future work on the use of bioactive metals in aquaculture systems will focus on a range of different metal alloys, and improved modulation of ion release mechanisms through increased particle embedment depth and separation.     

Tree allometry, leaf size and adult tree size in old-growth forests of western Oregon

Relationships between tree height and crown dimensions and trunk diameter were determined for shade-tolerant species of old-growth forests of western Oregon. The study included both understory and overstory species, deciduous and evergreen angiosperms and evergreen conifers. A comparison of adult understory species with sapling overstory species of similar height showed greater crown width and trunk diameter in the former, whether the comparison is made among conifers or deciduous trees. Conifer saplings had wider crowns than deciduous saplings, but the crown widths of the two groups converged with increase in tree height. Conifer saplings had thicker trunks than deciduous saplings of similar crown width, possibly because of selection for resistance to stem bending under snow loads. The results suggest that understory species have morphologies that increase light interception and persistence in the understory, whereas overstory species allocate their biomass for efficient height growth, thereby attaining the high-light environment of the canopy. The greater crown widths and the additional strength requirements imposed by snow loads on conifer saplings result in less height growth per biomass increment in conifer saplings than in deciduous saplings. However, the convergence in crown width of the two groups at heights greater than 20 m, and the proportionately smaller effect of snow loads on large trees, may result in older conifers equalling or surpassing deciduous trees in biomass allocation to height growth.     

Genetic effects on total phenolics, condensed tannins and non-structural carbohydrates in loblolly pine (Pinus taeda L.) needles

Carbon allocation to soluble phenolics (total phenolics, proanthocyanidins (PA)) and total non-structural carbohydrates (TNC; starch and soluble sugars) in needles of widely planted, highly productive loblolly pine (Pinus taeda L.) genotypes could impact stand resistance to herbivory, and biogeochemical cycling in the southeastern USA. However, genetic and growth-related effects on loblolly pine needle chemistry are not well characterized. Therefore, we investigated genetic and growth-related effects on foliar concentrations of total phenolics, PA and TNC in two different field studies. The first study contained nine different genotypes representing a range of genetic homogeneity, growing in a 2-year-old plantation on the coastal plain of North Carolina (NC), USA. The second study contained eight clones with different growth potentials planted in a 9-year-old clonal trial replicated at two sites (Georgia (GA) and South Carolina (SC), USA). In the first study (NC), we found no genetic effects on total phenolics, PA and TNC, and there was no relationship between genotype size and foliar biochemistry. In the second study, there were no differences in height growth between sites, but the SC site showed greater diameter (diameter at breast height (DBH)) and volume, most likely due to greater tree mortality (lower stocking) which reduced competition for resources and increased growth of remaining trees. We found a significant site?×?clone effect for total phenolics with lower productivity clones showing 27-30% higher total phenolic concentrations at the GA site where DBH and volume were lower. In contrast to the predictions of growth-defense theory, clone volume was positively associated with total phenolic concentrations at the higher volume SC site, and PA concentrations at the lower volume GA site. Overall, we found no evidence of a trade-off between genotype size and defense, and genetic potential for improved growth may include increased allocation to some secondary metabolites. These results imply that deployment of more productive loblolly pine genotypes will not reduce stand resistance to herbivory, but increased production of total phenolics and PA associated with higher genotype growth potential could reduce litter decomposition rates and therefore, nutrient availability.     

Length‐based assessment of larval lamprey population structure at differing spatial scales

1. Perspectives on lamprey management contrast between pest control in the US Great Lakes and species conservation in the Pacific Northwest, New Zealand, and Europe. Five lamprey species are listed in the European Union (EU) Habitats Directive (HD) as requiring conservation measures. Assessments of HD ‘conservation status’ for these lampreys mainly target the larval (ammocoete) stage.
2. Larval lamprey populations can be assessed by evaluating presence or absence, density and demographic structure in riverine samples. Demographic structure has typically been described from length–frequency data using qualitative approaches and the statistical assignment of age classes. Length‐based indicators (LBIs) may provide a more rapid and flexible framework.
3. The demographic structure of a fish population can be described by univariate length metrics: length range (L_RANGE) and 90^th percentile of length (L₉₀). This study used a pooled data set from seven Irish catchments to estimate a reference point (RP) value for each metric corresponding to a healthy larval lamprey population. Two LBIs were then derived that can be estimated for an observed (OBS) population as LBI_RANGE = L_{RANGE_OBS}/L_{RANGE_RP} and LBI₉₀ = L_{90_OBS}/L_{90_RP}.
4. Simulated lamprey population length structures, representing a range of status values, were used to develop a reference gradient (RG) to support population assessment using LBIs. The assessment framework was applied to each of the seven Irish catchments, and also to subcatchment and sampling‐site scales within the Barrow system. The LBIs and RG suggested that most catchments had favourable conservation status overall, whereas smaller assessment scales revealed a spread of status values.
5. The proposed framework allows the rapid assessment of demographic structure and comparison across systems. There is potential to track states across sampling sites, events, and legislative reporting cycles, and to interpret change in relation to the local environment. The general approach may be adaptable for other fish species monitored during juvenile stages.

     

Fluorescent in situ hybridization as an aid to introducing alien genetic variation into wheat

Summary Fluorescent in situ hybridization (FISH) has been used to assess the occurrence and frequency of wheat-alien chromosome pairing in a wheat/Thinopyrum bessarabicum hybrid and in wheat/rye hybrids with different levels of chromosome pairing by examining pollen mother cells at metaphase I of meiosis. The use of FISH to identify the presence and size of alien chromatin in a wheat background is also demonstrated.The value of FISH as an aid to the introgression of alien genetic variation into wheat is discussed.Abbreviations FISH fluorescent in situ hybridization - GISH genomic in situ hybridization - PRINS primer-induced in situ hybridization     

Identification of triploid Citrus by isozyme analysis

Summary Seedlessness is a desirable horticultural attribute in Citrus and is positively associated with triploidy. The conventional cytological method for triploid identification is a laborious technique involving the preparation of root tips for chromosomal analysis. Digital densitometry of isozymes, however, offers the possibility of distinguishing triploid Citrus from large populations of seedlings both quickly and cheaply. Where there are no gene dosage regulation effects, greater band density should be evident in the allozyme contributed by the diploid gamete for a heterozygous locus. The isozymes of 4 enzymes; malate dehydrogenase, 6-phosphogluconate dehydrogenase, shikimate dehydrogenase, and phosphoglucose isomerase, were investigated with polyacrylamide gel electrophoresis. Band densities of these isozymes for triploid Citrus, their diploid siblings and diploid progenitors were measured using a digital densitometer. Of the 4 enzymes investigated only allozymes for shikimate dehydrogenase exhibited consistent differences over a wide range of Citrus cultivars. Greater band density was evident in the allozyme contributed by the diploid gamete. The band density ratio between allozymes for triploid Citrus was close to 0.5, while for diploid Citrus band density ratios were close to 1.0. This effect is due to the extra protein coded by the additional gene dose and was not observed in diploids. Shikimate dehydrogenase proved to be an accurate molecular marker for distinguishing between diploid and triploid Citrus for heterozygous progeny.Abbreviations PAGE Polyacrylamide gel electrophoresis - MDH malate dehydrogenase - 6PGD 6-phosphogluconate dehydrogenase - SkDH shikimate dehydrogenase - PGI phosphoglucose isomerase     

Evaluation of maternal parent and puroindoline allele on kernel texture in a reciprocal cross between two hard spring wheat cultivars

Kernel texture is an important characteristic for both the milling and the end-use quality of wheat (Triticum aestivum L.). Gene sequence variation and mutations to the two puroindoline genes (Pina and Pinb), located at the Ha locus on chromosome 5DS, account for the majority of variation in wheat kernel texture. Other factors also influence kernel texture, including effects associated with different maternal parent backgrounds. To investigate the effect of two hard puroindoline alleles in different maternal backgrounds, a population of 228 recombinant inbred lines (RILs) derived from a reciprocal cross between two wheat cultivars ID377s (Pina-D1b/Pinb-D1a) and Klasic (Pina-D1a/Pinb-D1b) were examined in two succeeding generations (F₇ & F₈). Kernel texture was determined using the Single Kernel Characterization System (SKCS) and the RIL puroindoline haplotype was identified by the sequence-specific PCR amplification of each gene. Analysis of variance identified a significant (P 0.001) effect of the maternal parent and puroindoline mutation on kernel texture. RILs containing the Pina-D1b mutation were significantly harder than lines containing the Pinb-D1b mutation. RILs which had Klasic as the maternal parent were significantly harder than those which had ID377s as the maternal parent. When the maternal parent and puroindoline allele were analyzed in combination, RILs derived from Klasic as the maternal parent and the Pina-D1b allele were significantly harder (P 0.001) than those containing the same allele but ID377s as the maternal parent. The same occurred for RILs containing the Pinb-D1b allele, lines with Klasic as the maternal parent were harder than lines with ID377s as the maternal parent. These results corroborate the harder phenotype of the Pina-D1b allele and indicate a significant maternally-inherited contribution to kernel texture variation.