Influence of temperature,humidity duration and growth stage on the infection and mycotoxin production by Fusarium langsethiae and Fusarium poae in oats

High occurrence of Fusarium poae (FP) and Fusarium langsethiae (FL) and their mycotoxins nivalenol (NIV) and T-2/HT-2 have been observed in Swiss oats. Early prediction of mycotoxin levels is important for farmers and the cereal industry to minimize the risk of contaminated food and feed. Therefore, climate chamber experiments were conducted to investigate the influence of different temperatures (10, 15, 20 °C) and durations (4, 8, 12 h) at 99% relative humidity (RH) on the infection of oats with FP and FL. In addition, to discover the most susceptible period of oats, artificial FL inoculations were conducted at different growth stages. Field experiments were performed to observe the dispersal of these fungal species within the field and to investigate the weather conditions that influence the dispersal. The climate chamber experiments revealed higher contamination with NIV and T-2/HT-2 in the 10 °C treatments and with a prolonged humidity duration of 12 h 99% RH. Inoculations of oat plants at early (DC 61) and mid (DC 65) anthesis, led to higher FL infection and T-2/HT-2 accumulation in the grains compared with treatments at earlier growth stages, which might be due to an increased susceptibility during anthesis. No indication for spore dispersal was observed in the field experiments. The results obtained, together with the cropping factors that influence infection and mycotoxin production, could be used as a first step in developing forecasting models to predict the contamination of oats with the mycotoxins NIV and T-2/HT-2.     

Calibration and validation of optical chlorophyll‐measuring devices for use in predicting crude protein concentration in tropical grass herbage

The objective of this experiment was to evaluate the Fieldscout CM 1000 NDVI and Yara N‐Tester as easy‐to‐use and cost‐effective tools for predicting foliar chlorophylls (a, b and total) and crude protein (CP) concentrations in herbage from three tropical grass species. Optical chlorophyll measurements were taken at three stages (4, 8 and 12 weeks) of regrowth maturity in Guinea grass (Panicum maximum) and Mulato II (Brachiaria hybrid) and at 6 and 12 weeks maturity in Paspalum spp (Paspalum atratum). Grass samples were harvested subsequent to optical measurements for laboratory analysis to determine CP and solvent‐extractable chlorophylls (a, b and total) concentrations. Optical chlorophyll measurements and CP concentrations were highly correlated (Yara N‐Tester: r² = 0·77–0·89; Fieldscout CM 1000 NDVI: r² = 0·52–0·84). Crude protein prediction models from the Yara N‐Tester and Fieldscout CM 1000 NDVI accounted for 70–89% and 44–73% CP variability, respectively, in Mulato II and Guinea grass. The Yara N‐tester produced more accurate and reliable CP estimates based on very high concordance correlation coefficient [CCC (0·73–0·91)] and low rMSPE, mean and regression bias. It is concluded that the Yara N‐Tester produces more accurate and reliable CP estimates of tropical pastures.     

Utilizing a DUALEM‐421 and inversion modelling to map baseline soil salinity along toposequences in the Hunter Valley Wine district

In the oldest commercial wine district of Australia, the Hunter Valley, there is the threat of soil salinization because marine sediments underlie the area. To understand the risk requires information about the spatial distribution of soil properties. Electromagnetic (EM) induction instruments have been used to identify and map the spatial variation of average soil salinity to a certain depth. However, soils vary with depth dependent on soil forming factors. We collected data from a single‐frequency and multiple‐coil DUALEM‐421 along a toposequence. We inverted this data using EM4Soil software and evaluated the resultant 2‐dimensional model of true electrical conductivity (σ – mS/m) with depth against electrical conductivity of saturated soil pastes (EC_p – dS/m). Using a fitted linear regression (LR) model calibration approach and by varying the forward model (cumulative function‐CF and full solution‐FS), inversion algorithm (S1 and S2), damping factor (λ) and number of arrays, we determined a suitable electromagnetic conductivity image (EMCI), which was optimal (R² = 0.82) when using the full solution, S2, λ = 3.6 and all six coil arrays. We conducted an uncertainty analysis of the LR model used to estimate the electrical conductivity of the saturated soil‐paste extract (EC_e – dS/m). Our interpretation based on estimates of EC_e suggests the approach can identify differences in salinity, how these vary with parent material and how topography influences salt distribution. The results provide information leading to insights into how soil forming factors and agricultural practices influence salinity down a toposequence and how this can guide soil management practices.     

Replacing Soybean Meal with Alternative Protein Sources in Diets for Pond‐raised Hybrid Catfish, ♀ Ictalurus punctatus × ♂ Ictalurus furcatus

The present study investigated the replacement of soybean meal with combinations of two or three alternative protein sources in diets for pond‐raised hybrid catfish, ♀ Ictalurus punctatus × ♂ Ictalurus furcatus. Alternative protein sources evaluated included cottonseed meal, distillers dried grains with solubles (DDGS), peanut meal, and porcine meat and bone meal (PMBM). Hybrid catfish fingerlings with a mean initial weight of 35 g/fish were stocked into 25 earthen ponds (0.04 ha) at a density of 14,826 fish/ha. Fish were fed once daily to apparent satiation for 166 d. No significant differences were observed for total diet fed, net yield, weight gain, survival, carcass yield, fillet yield, or fillet proximate composition among dietary treatments. Results show soybean meal may be completely replaced by combinations of cottonseed meal and one or two other alternative protein sources including DDGS, peanut meal, and PMBM in the diet without markedly affecting production and processing characteristics and fillet proximate composition of pond‐raised hybrid catfish. These alternative diets may be used during foodfish production when prices are favorable.     

海水倒灌农田水稻栽培技术示范小结

通过对2014年"威马逊"超强台风造成海水倒灌农田后的修复改良水稻栽培技术,包括品种筛选、整地、育秧、水肥管理等试验。摸索出一套海水倒灌农田的水稻高产栽培技术,解决了海水倒灌农田灾区农民的口粮问题,为今后海南沿海地区台风造成海水倒灌农田后的水稻恢复生产储备相应技术。     

Ray blight of pyrethrum in Australia: a review of the current status and future opportunities

Ray blight caused by Stagonosporopsis tanaceti is one of the most important diseases of pyrethrum (Tanacetum cinerariifolium), a perennial herbaceous plant cultivated for the extraction of insecticidal pyrethrins in Australia. The disease is responsible for complete yield loss in severe outbreaks. Infected seed is considered as the principal source of S. tanaceti. Infection hyphae remain only in the seed coat and not in the embryo, resulting in pre- and post-emergence death of seedlings and latent infection. Therefore, quantification of the level of infection by S. tanaceti within seed using a qPCR assay is important for efficient management of the disease. Stagonosporopsis tanaceti completes its life cycle within 12 days after leaf infection through production of pycnidia and can infect every tissue of the pyrethrum plant except the vascular and root tissues. Ray blight epidemics occur in pyrethrum fields through splash dispersal of pycnidiospores between adjacent plants. Besides steam sterilization, thiabendazole/thiram and fludioxonil are effective seed-treating chemicals in controlling S. tanaceti before planting begins. Ray blight is currently managed in the field through the foliar application of strobilurin fungicides in the first 1–2 years of crop establishment. Later on, difenoconazole and multisite specific fungicides in the next 2–3 years during early spring successfully reduce ray blight infestation. Avoiding development of resistance to fungicides will require more sustainable management of ray blight including the development and deployment of resistant cultivars.     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

Mapping QTLs using a novel source of salinity tolerance from Hasawi and their interaction with environments in rice

Background

Salinity is one of the most severe and widespread abiotic stresses that affect rice production. The identification of major-effect quantitative trait loci (QTLs) for traits related to salinity tolerance and understanding of QTL × environment interactions (QEIs) can help in more precise and faster development of salinity-tolerant rice varieties through marker-assisted breeding. Recombinant inbred lines (RILs) derived from IR29/Hasawi (a novel source of salinity) were screened for salinity tolerance in the IRRI phytotron in the Philippines (E1) and in two other diverse environments in Senegal (E2) and Tanzania (E3). QTLs were mapped for traits related to salinity tolerance at the seedling stage.

Results

The RILs were genotyped using 194 polymorphic SNPs (single nucleotide polymorphisms). After removing segregation distortion markers (SDM), a total of 145 and 135 SNPs were used to construct a genetic linkage map with a length of 1655 and 1662 cM, with an average marker density of 11.4 cM in E1 and 12.3 cM in E2 and E3, respectively. A total of 34 QTLs were identified on 10 chromosomes for five traits using ICIM-ADD and segregation distortion locus (SDL) mapping (IM-ADD) under salinity stress across environments. Eight major genomic regions on chromosome 1 between 170 and 175 cM (qSES1.3, qSES1.4, qSL1.2, qSL1.3, qRL1.1, qRL1.2, qFWsht1.2, qDWsht1.2), chromosome 4 at 32 cM (qSES4.1, qFWsht4.2, qDWsht4.2), chromosome 6 at 115 cM (qFWsht6.1, qDWsht6.1), chromosome 8 at 105 cM (qFWsht8.1, qDWsht8.1), and chromosome 12 at 78 cM (qFWsht12.1, qDWsht12.1) have co-localized QTLs for the multiple traits that might be governing seedling stage salinity tolerance through multiple traits in different phenotyping environments, thus suggesting these as hot spots for tolerance of salinity. Forty-nine and 30 significant pair-wise epistatic interactions were detected between QTL-linked and QTL-unlinked regions using single-environment and multi-environment analyses.

Conclusions

The identification of genomic regions for salinity tolerance in the RILs showed that Hasawi possesses alleles that are novel for salinity tolerance. The common regions for the multiple QTLs across environments as co-localized regions on chromosomes 1, 4, 6, 8, and 12 could be due to linkage or pleiotropic effect, which might be helpful for multiple QTL introgression for marker-assisted breeding programs to improve the salinity tolerance of adaptive and popular but otherwise salinity-sensitive rice varieties.

     

Inhibition of postharvest senescence of green leafy vegetables by exogenous D-cysteine and L-cysteine as precursors of hydrogen sulphide

Hydrogen sulphide (H₂S) inhibits senescence in harvested fruit and vegetables but presents logistical, safety and regulatory issues to become a commercial treatment. D-cysteine and L-cysteine are semi-essential amino acids that are metabolised to hydrogen sulphide by plant tissues albeit by different pathways. This paper examines the effect of cysteine on postharvest senescence of three green leafy vegetables. Spraying pak choy leaves with 10 mmol D-cysteine, L-cysteine or DL-cysteine inhibited leaf senescence through a delayed loss of green colour expressed as market life, reduced respiration rate and reduced ethylene production. The beneficial effects of cysteine were similar to those achieved by fumigation with hydrogen sulphide. L-cysteine sprays on parsley and peppermint leaves also showed reduced leaf colour loss and respiration compared to untreated leaves. Cysteine, either as the racemate or individual enantiomers, is considered to have commercial potential for green leafy vegetables as it provides the beneficial effect of hydrogen sulphide but should be easier to register for commercial use due to the GRAS status of L-cysteine.