Short‐term physiological role of thyroxine administration on plasma metabolites and growth performance of Sterlet sturgeon Acipenser ruthenus

Thyroid hormones (THs) play important roles in regulating growth, development and physiological functions in vertebrates. To study the role of short‐term effects of thyroxine (T4) on metabolism and growth in female Sterlet sturgeon, thirty fish with a weight of 707.97 ± 37.15 g were divided into six tanks. Fish were injected intraperitoneal with (a) coconut oil alone (control), (b) 1 mg T4 kg per BW in coconut oil (T₁) and (c) 10 mg T4 kg per BW in coconut oil (T₁₀). Blood samples were collected at 0, 4, 7, 14, 28 and 60 days for plasma biochemical analysis, and body length and mass were determined at day 60. Based on results, higher growth was indicated in T₁₀ group. The highest T4 levels were observed on day 4 in the T₁ and T₁₀ treatments and gradually declined during the trial. Plasma T3 levels were highest on days 4 and 7 in the T₁ and T₁₀ groups, respectively. Plasma triglyceride levels were significantly elevated on day 28 in the T₁ group and on day 60 in the T₁₀ group. Plasma glucose concentrations were significantly elevated on days 7 and 14 in T₁₀ group. Overall, the present results suggest that a single injection of T4 can improve growth via changes in the metabolic profile of Sterlet sturgeon.     

机械运输对伊朗北部山林陡峭集材道土壤的干扰

A study was conducted to investigate the effects of skid trail slope and traffic levels on soil disturbances at two soil depths (0–10 and 10–20 cm). The treatments were set at four traffic levels (2, 7, 12 and 20), two slope classes (<20% and >20%) and two soil depths (0–10 and 10–20 cm). Results show that skidder traffic, longitudinal slope and soil depth have significant effect on soil bulk density in skid trail. Comparison of average soil bulk density in different traffic levels shows that there are significant differences in average bulk density between different traffic levels and control (p<0.05). The average bulk densities in different slopes and soil depths are significantly increased with increase in traffic levels, maximized at 12 passes (p<0.05), but there are no significant differences between 12 and 20 passes. The interaction effects between traffic and soil depth are significant (F _0.05,3=0.109, p<0.001). For all traffic treatments, there are significant differences in soil moisture content between the two slope classes and the two depths (p<0.001). However, the interaction effects between traffic levels and slope classes are not significant (p >0.05), although skidder traffic and slope affected soil moisture content.     

Effect of growth parameters on structural and optical properties of CdS nanowires prepared by polymer controlled solvothermal route

Cadmium sulfide nanowires were successfully obtained via a poly (ethylene glycol)-assisted solvothermal route. In this procedure, cadmium nitrate and thiourea were used as Cd and S sources, respectively, and polyethylene glycol 400 was used as an inducing soft template to control the one-dimensional growth of CdS nanostructures. The effects of different growth parameters in the solvothermal process such as type of the solvents, reaction time, and temperature on the morphology, structural and optical properties of the products were investigated. The provided structures were characterized by X-ray diffractometery, scanning electron microscopy, and UV-visible absorption spectroscopy. The results show that the as-prepared samples have hexagonal phase and grow into long nanowire shape with increasing the reaction time, temperature and volume ratios of ethylenediamine (en) to H₂O. Uniform sized nanowires with the average diameter of 75 nm and the average length of 2.5 µm were obtained using ethylenediamine solvent at 170 °C for 3 days.     

Combining ability for grain chemistry quality traits in a white oat diallelic cross

There has been a strong demand for oat genotypes that contain caryopsis with high chemical quality which can suit the different market niches. Therefore, the objectives of this study were to assess the general (GCA) and specific combining ability (SCA) of white oat cultivars through diallelic crosses providing information about the genetic effects on expression of grain chemical quality components. Also, it was aimed to estimate the heterosis on F₁ and F₂ generations and the vigor loss due to inbreeding. During 2008, 21 hybrid populations F₁ and F₂ were obtained from artificial crossing among seven Brazilian white oat cultivars, following the complete diallel design, without considering the reciprocals. These populations and their parents were evaluated in the 2009 season in the experimental field in Capão do Leão, RS, Brazil. The higher values of mean squares associated to GCA indicates a strong contribution of additive genetic effects to the expression of grain chemical components. The parents tested showed a tendency to develop progeny with negative heterosis regarding protein, lipid, β-glucan and soluble dietary fiber in the grain, and positive for the content of nitrogen-free extract, total and insoluble dietary fiber. IAC 7 features a potential parent for obtaining grains with high protein and dietary fiber content, and low caloric content, fit to human diet. Meanwhile, UPF 15 and FAPA Louise can represent donors of alleles to increase lipid contents, while FAPA Louise and URS Guapa can be used to raise the grain nitrogen-free extract contents of lines intended for animal feeding.     

Synthesis of highly intercalated urea-clay nanocomposite via domestic montmorillonite as eco-friendly slow-release fertilizer

The present study describes the preparation and characterization of montmorillonite-urea nanocomposites (Mt-Ur) using aqueous suspension technique at various stirring times and different ratio of montmorillonite to urea (Mt/Ur) via an impure and domestic montmorillonite (Mt), without the application of any chemical reagents and high-energy-demand process (environmentally friendly). The intercalation of urea into Mt interlayer was clearly demonstrated by a significant expansion of d₀₀₁ spacing (interlayer space of Mt) from 1.23 to 1.71 nm which has not yet been reported by aqueous suspension technique. Analyses performed by Fourier transform-infrared spectroscopy (FT-IR), Thermogravimetric analysis (TGA) and X-ray diffraction (XRD) also confirmed the effectiveness of this simple process to intercalate the urea into clay lamella. The release pattern demonstrated that the nanocomposite had a slow-release behaviour for urea dissolution. The results also suggested that the Mt type applied in the current study, in a 1:20 Mt/Ur ratio and stirred for 1 h, possessed desirable ecological and economic efficiency in the production of slow-release urea fertilizer due to the application of the impure and domestic clay which is of very low-cost and eco-friendly. Nevertheless, urea was fully intercalated into the interlayer of clay by a simple technique and with a good slow-release behaviour.     

Evaluation of bone healing in canine tibial defects filled with cortical autograft,commercial-DBM,calf fetal DBM,omentum and omentum-calf fetal DBM

The present study was conducted to compare the effects of xenogenic bovine fetal demineralized bone matrix (DBM), commercial DBM, omentum, omentum-calf fetal DBM, cortical autograft and xenogenic cartilage powder on the healing of tibial defects in a dog model to determine the best material for bone healing. Seven male adult mongrel dogs, weighing 26.2 ± 2.5 kg, were used in this study. Seven holes with a diameter of 4-mm were created and then filled with several biomaterials. Radiographs were taken postoperatively on day 1 and weeks 2, 4, 6, 8. The operated tibias were removed on the 56th postoperative day and histopathologically evaluated. On postoperative days 14, 42 and 56, the lesions of the control group were significantly inferior to those in the other group (p < 0.05). On the 28th postoperative day, the autograft group was significantly superior to the control and omentum groups (p < 0.05). Moreover, calf fetal DBM was significantly superior to the control group. There was no significant difference between the histopathological sections of all groups. Overall, the omentum and omentum-DBM groups were superior to the control group, but inferior to the autograft, commercial-DBM, calf fetal DBM and calf fetal cartilage groups.     

Extraction and characterization of volatile compounds in Maytenus ilicifolia, using high-pressure CO2

This work is focused on the chemical characterization of Maytenus ilicifolia extracts obtained from high-pressure CO2 extraction. The experiments were performed in a laboratory-scale unit, where the effect of particle size (35-200 mesh), CO2 mass flow rate (1-3 g/min), temperature (293-323 K), pressure (100-250 bar), and extraction time was investigated in terms of liquid yield and chemical composition of the extracts. Results show that the particle size and CO2 mass flow rate did not affect the liquid yield, whereas the extraction temperature and solvent density exerted a pronounced effect on both liquid yield and chemical distribution of volatile compounds. The extracts were chemically analyzed with regard to phytol, squalene, vitamin E, stigmasterol, friedelan-3-ol, friedelin, dodecanoic acid and geranyl acetate in a GC/MSD.     

Identification of broad bean cultivars based on isozyme patterns

Summary With the increasing rate of new cultivar production for different crop plants, there is great need for methods of identifying each cultivar discriminatingly. Starch gel electrophoresis was employed to study the differences between the esterase and cathodal peroxidase isozyme patterns of 40 broad bean (Vicia faba L.) cultivars. A total of 10 and 17 medium to darkly stained bands were obtained for esterase and peroxidase systems, respectively. Bands from each enzyme system could be gropuped into three zones. Bands belonging to zone 1 of esterase (E₁) and zones 2 and 3 of peroxidase (P₂ and P₃) were quite distinct, stained intensely, and were especially useful for identification purposes.The differences in banding patterns among cultivars of the same origin were as great as those of cultivars of unrelated origin. A large proportion of the cultivars could be completely differentiated using both of the isozyme systems. There were no bands present in either enzyme system which were common to all cultivars.     

Growth,development and behaviour of Persian sturgeon Acipenser persicus larvae in different light regimes

The effects of five different light regimes on growth performance and behaviour of Persian Sturgeon larvae were examined. Larvae were reared under five different photoperiods (24L, 12L:12D, 16L:8D, 8L:16L and 24D), from hatching (25.8 ± 8.1 mg; 12 ± 0.6 mm) to 28 days post‐hatch (dph). Except the last week, there was no significant difference in growth parameters among the experimental groups. Growth performance significantly improved in larvae reared under a continuous light regime. The highest final length (34.5 ± 1.7 mm) was measured in 24L and the lowest one (29.5 ± 0.4 mm) in the constant darkness. Relative to other experimental groups, the continuous darkness had a retarding impact on the yolk sac absorption and swarming behaviour. Among the whole body compositions, the lowest body moisture content was measured in the continuous light group. Persian Sturgeon pre‐larvae and larvae were not completely dependent on light regimes (in 1–21 days), whereas on the basis of measured parameters (total length, wet and dry weight and digestive fullness index) a continuous light regime played a decisive role on growth performance beyond 21 dph.     

Beta-D-glucosyl and alpha-D-galactosyl Yariv reagents: syntheses from p-nitrophenyl-D-glycosides by transfer reduction using ammonium formate

Yariv beta-D-glucosyl (4a) and Yariv alpha-d-galactosyl (4b) reagents are multivalent phenylglycosides. The beta-D-glucosyl reagent is considered diagnostic for arabinogalactan proteins (AGPs) to which it can reversibly bind, stain, and precipitate. The alpha-D-galactosyl reagent does not bind AGPs and is used as a control. In a new strategy, we accomplished the large scale synthesis of the Yariv reagents in one continuous step by a transfer reduction method and without a need for any specialized apparatus. As the starting material, p-nitrophenyl-D-glycosides (1) were reduced to p-aminophenyl-D-glycosides (2) using ammonium formate as the hydrogen donor. The excess formate was converted to formic acid and ammonia, which then were removed from the reaction by simple distillation. Without isolation, p-aminophenyl-D-glycosides were diazotized (3) and coupled to phloroglucinol to give the Yariv reagents in approximately 40% yield. AGPs are a major component of gum arabic, an emulsifying agent widely used in the food and pharmaceutical industries. Increasing interest in AGPs prompted the development of a relatively easy and inexpensive method for the synthesis of these reagents.