Effects of carbon and nitrogen amendment on soil carbon and nitrogen mineralization in volcanic immature soil in southern Kyushu,Japan

Soil N mineralization is affected by microbial biomass and respiration, which are limited by available C and N. To examine the relationship between C and N for soil microbial dynamics and N dynamics, we conducted long-term laboratory incubation (150 days) after C and N amendment and measured changes in C and N mineralization, microbial biomass C, and dissolved C and N throughout the incubation period. The study soil was volcanic immature soil from the southern part of Japan, which contains lower C and N compared with other Japanese forest soils. Despite this, the area is covered by well-developed natural and plantation forests. Carbon amendment resulted in an increase in both microbial biomass and respiration, and net N mineralization decreased, probably due to increasing microbial immobilization. In contrast, N amendment resulted in a decrease in microbial respiration and an increase in net N mineralization, possibly due to decreased immobilization by microbes. Amendment of both C and N simultaneously did not affect microbial biomass and respiration, although net N mineralization was slightly increased. The results suggested that inhibitory effect on microbial respiration by N amendment should be reduced if carbon availability is higher. Thus, soil available C may limit microbial biomass and respiration in this volcanic immature soil. Even in immature soil where C and N substrate is low, soil C, such as plant root exudates and materials from above- and belowground dead organisms, might help to maintain microbial activity and N mineralization in this study site.     

Preparation and properties of oligoesterified wood blocks based on anhydride and epoxide

Summary Preparation and properties of oligoesterified woods in the form of block are reviewed. The oligoesterified wood blocks are prepared by stepwise addition reactions of dicarboxylic acid anhydride and epichlorohydrin (EpCl), or one-step chemical treatment with reactant solution of the anhydride and EpCl. Among the preparation methods investigated, the heating-suction method is industrially advantageous. In this method, wood blocks impregnated with the reactant solution are heated and then subjected to suction under reduced pressure and heating, to remove unreacted reactant solution. The oligoesterified wood blocks thus obtained contain oligoester chains formed by the alternate additions of the anhydride and EpCl to OH groups of wood. They also contain small amounts of free oligomers not linked with the wood matrix. Their dimensional stabilities against moisture and water become greater with increase in the apparent total weight increase due to the oligoester chains and the free oligomers. The oligoesterified wood blocks based on phthalic anhydride-EpCl are industrially promising, and exhibit higher compressive and flexural strenghts, greater chemical resistance, electric insulation, and much lower water absorption than untreated wood block. Furthermore, excellent resistances are observed against weathering and biodeterioration.     

Plus tree of Cryptomeria japonica D. Don with a heterozygous male-sterility gene

To find plus tree clones of Cryptomeria japonica that are heterozygous for a male-sterility gene (Aa), we crossed a homozygous male-sterile tree (aa) with 63 clones. Male sterility in this case is controlled by a recessive allele at a single gene locus and is expressed only in homozygotes. All F₁ seedlings obtained by crossing the male-sterile mother tree and 62 out of the 63 clones produced pollen. In contrast, F₁ seedlings obtained from the crossing between the male-sterile mother tree and a plus tree clone, Ohara 13, produced 64 male-sterile individuals and 52 fertile individuals. The segregation ratio fitted the expected 1 : 1 ratio according to a chi-square test. These results clearly demonstrate that the Ohara 13 clone is heterozygous for a male-sterility gene.     

Distribution of boron in wood treated with aqueous and methanolic boric acid solutions

The distributions of boron in Japanese cedar (Cryptomeria japonica D. Don) sapwood blocks treated with aqueous or methanolic boric acid [B(OH)₃] solutions were explored through Raman spectroscopy and prompt gamma-ray analysis (PGA). B(OH)₃ was the sole boron species observed in Raman spectra of the wood blocks treated with either solution. Plots of weight gain of the treated wood blocks versus boron concentration in treatment solutions were found to be linear. The results indicated that the methanolic solution makes it possible to impregnate wood with much larger amounts of boron than the aqueous solution. PGA confirmed that B(OH)₃ was highly enriched near the end grains of the treated wood blocks. Raman measurements suggested that boron content in the bulk of the wood block is not as large as expected from the weight gain of the treated wood blocks when an ordinary air-drying method is used. It was concluded that the aqueous solution impregnates the cell walls of wood with boron more easily than the methanolic solution. Part of this report was presented at the 55th (Kyoto, March 2005) and 56th (Akita, August 2006) Annual Meetings of the Japan Wood Research Society. This article follows the previous rapid communication “Analysis of boron in wood treated with boric acid solutions using Doppler broadening method of prompt gamma-rays.” J Wood Sci (2006) 52:279–281     

日本北海道北部寒温带森林流域林冠层凋落物及其养分归还量的景观格局(英文)

Within a forested watershed at the Uryu Experimental Forest of Hokkaido University in northern Hokkaido, overstory litterfall and related nutrient fluxes were measured at different landscape zones over two years. The wetland zone covered with Picea glehnii pure stand. The riparian zone was deciduous broad-leaved stand dominated by Alnus hirsuta and Salix spp., while the mixture of deciduous broadleaf and evergreen conifer dominated by Betula platyphylla, Quercus crispula and Abies sachalinensis distributed on the upland zone. Annual litterfall averaged 1444, 5122, and 4123 kg.hm^-2·a^-1 in the wetland, riparian and upland zones, respectively. Litterfall production peaked in September-October, and foliage litter contributed the greatest amount （73.4%-87.6 %） of the annual total litterfall. Concentrations of nutrients analyzed in foliage litter of the dominant species showed a similar seasonal variation over the year except for N in P glehnii and A. hirsuta. The nutrient fluxes for all elements analyzed were greatest on riparian zone and lowest in wetland zone. Nutrient fluxes via litterfall followed the decreasing sequence： N （11-129 kg.hm-2.aq） 〉 Ca （9-69） 〉 K （5-20） 〉 Mg （3-15） 〉 P （0.4-4.7） for all stands. Significant differences were found in litterfall production and nutrient fluxes among the different landscape components. There existed significant differences in soil chemistry between the different landscape zones. The consistently low soil C：N ratios at the riparian zone might be due to the higher-quality litter inputs （largely N-fixing alder）.     

Development of an air-injection press for preventing blowout of particleboard II: improvement of board properties using small-diameter holes for air injection

An air-injection press, which has holes punched in the heating plates, injects high-pressure air through the holes of one plate into boards during press heating. The air-injection press can manufacture boards from high-moisture-content particles by controlling blowouts of the boards. In this study, boards were manufactured from particles that had a moisture content of 25% by using the air-injection press, which reduced the required pressing time. Boards manufactured by injecting air through holes of 5 mm in diameter were of poor quality with a low internal bond strength of only 0.31 MPa. When the hole diameter was reduced to 1 mm, the internal bond strength increased to 0.44 MPa. A high air-injection pressure of 0.55 MPa also resulted in improved board properties over those for boards manufactured at lower pressures. This was probably because a large amount of binder was released from boards through the 5-mm holes, together with water vapor, during air injection; the small-diameter holes reduced the release of binder, resulting in better board properties.     

Effects of sealed press on improving the properties of particleboard

To improve the properties of particleboard, boards were produced using a sealed press. With the sealed press, boards were processed under high-temperature and high-pressure steam. This increased the saturation temperature, causing a dramatic rise in temperature inside the board, faster curing of the binder, and a shorter pressing time. The boards were bonded with urea formaldehyde resin, melamine urea formaldehyde resin, or poly(methylene diphenyl diisocyanate) (PMDI). The sealed press improved the internal bond strength and thickness swelling of boards regardless of the binder used during the reduced pressing time. The increased bonding strength improved the board properties, allowing PMDI with a lower resin content to be used for bonding the boards.     

Comparative Evaluation on Nitrogen Saturation of Forest Catchments in Japan and Northeastern United States

To analyze the differences in the status and processes of nitrogen saturation in Japan and northeastern United States, we examined the hydrobiogeochemistry of nitrogen of forested watersheds in these regions. Two distinct differences were found between watersheds in Japan compared with those in US. 1) In Japanese watersheds, marked decreases of NO₃ ^? concentration in surface waters during the summer growing season were not found and NO₃ ^? concentrations sometimes increased especially in the summer at nitrogen saturated sites. This contrast with watersheds in US where decreases in NO₃ ^? concentration during the summer are commonly observed except those watersheds in advanced stages of nitrogen saturation. These differences in NO₃ ^? concentration relationships can be attributed to climatic differences, with Japan having high precipitation and high discharge during the summer, while in many regions of North America lowest discharges are found in the summer. The climatic regime in Japan leads to high rates of mineralization and the rapid transport of NO₃ ^? to streams in summer. 2) Japanese watersheds, even those with high NO₃ ^? concentrations in surface waters, show little evidence of acidification. This is in contrast to sites in US where increased NO₃ ^? concentrations, especially during episodic events, result in surface water acidification.