Organochlorine and Metal Accumulation in Fish (Phoxinus phoxinus) Along a North-South Transect in the Alps

Southern populations of the European minnow fromremote oligotrophic mountain lakes along an Alpinenorth-south transect accumulated more p,p DDE andPCBs than northern populations. As these semi-volatileorganochlorines predominantly evaporate in warmcountries, higher rates of condensation (deposition)are assumed to occur in the southern slopes of theAlps. The higher accumulation of lead and cadmium insouthern population is rather attributed to geogenicand specific environmental impacts than to atmosphericdeposition. Increasing liver ratios of [glutathionedisulfide]/[glutathione], a potential indicator foroxidative stress, from north to south reflect thegenerally higher toxic load at remote sites at thesouthern edge of the Alps. However, histopathologicalchanges in the liver did not correlate withaccumulated toxicants indicating that deposition doesnot lead to severe lesions but induces specificmechanisms for detoxification.     

Metabolic responses to exogenous bovine somatotropin in Friesian cows of low or high genetic merit

Basal hormone/metabolite concentrations and responses to intravenous challenges of glucose, insulin and epinephrine were examined in Friesian cows from selection lines of low or high genetic merit treated with recombinantly-derived bovine somatotropin (bST) or control formulation in a 2 x 2 factorial design. Cows from the low genetic merit (low breeding index, LBI) line had previously been shown to be more responsive to the galactopoietic effects of bST (50 mg/day) than those from the high breeding index (HBI) line. Despite this, comparisons of metabolic differences were not confounded by differences in energy balance because bST treatment had also caused an increase in voluntary intake of cut pasture. Circulating levels of somatotropin, insulin-like growth factor-I (IGF-I) and insulin were greater in bST-treated than control cows but neither bST treatment nor selection line influenced basal concentrations of glucose, non-esterified fatty acids (NEFA), beta-hydroxybutyrate, urea or creatinine. Treatment with bST produced a small increase in sensitivity of cows to the lipolytic effects of epinephrine and this effect was similar in both selection lines. HBI cows had greater circulating insulin levels following the glucose challenge than LBI cows but bST treatment did not affect the insulin response to exogenous glucose. Whereas bST treatment retarded the glycogenolytic response to epinephrine and the clearance of blood glucose in response to insulin in LBI cows, it had no effect on epinephrine-stimulated glycogenolysis, and caused enhanced glucose clearance in response to insulin, in HBI cows. Results are consistent with bST altering the homeorhetic control of metabolism but do not adequately explain the greater responsiveness of LBI cows to the galactopoietic effects of bST.     

Estimation of relationships between mineral concentration and fatty acid composition of longissimus muscle and beef palatability traits

The objective of this study was to determine the influence of beef LM nutrient components on beef palatability traits and evaluate the impact of USDA quality grade on beef palatability. Longissimus muscle samples from related Angus cattle (n = 1,737) were obtained and fabricated into steaks for trained sensory panel, Warner-Bratzler shear force (WBSF), lipid oxidation measured by thiobarbituric acid reactive substances (TBARS), fatty acid, and mineral composition analysis. Pearson phenotypic correlations were obtained by the correlation procedure of SAS. Beef palatability data were analyzed by the GLM procedure of SAS with USDA quality grade as the main effect. Specific mineral concentrations did not demonstrate strong correlations with WBSF or sensory traits (r = -0.14 to 0.16). However, minerals appeared to have a stronger relationship with flavor; all minerals evaluated except Ca and Mn were positively correlated (P < 0.05) with beef flavor. Stearic acid (C18:0), C18:2, C20:4, and PUFA were negatively correlated (P < 0.05) with all 3 panelist tenderness traits (r = -0.09 to -0.22) and were positively correlated (P < 0.05) with WBSF (r = 0.09 to 0.15). The MUFA were positively correlated (P < 0.05) with panelist tenderness ratings (r = 0.07 to 0.10) and negatively associated (P < 0.05) with WBSF (r = -0.11). The strongest correlations with juiciness were negative relationships (P < 0.05) with C18:2, C18:3, C20:4, and PUFA (r = -0.08 to -0.20). Correlations with beef flavor were weak, but the strongest was a positive relationship with MUFA (r = 0.13). Quality grade affected (P < 0.05) WBSF, TBARS, and all trained sensory panel traits, except livery/metallic flavor. As quality grade increased, steaks were more tender (P < 0.05), as evidenced by both WBSF and sensory panel tenderness ratings. Prime steaks were rated juiciest (P < 0.05) by panelists, whereas Select and Low Choice were similarly rated below Top Choice for sustained juiciness. Quality grade influenced (P < 0.05) beef flavor, but not in a linear fashion. Although there were significant correlations, these results indicate tenderness, juiciness, and flavor are not strongly influenced by individual nutrient components in beef LM. Furthermore, the positive linear relationships between USDA quality grade and beef palatability traits suggest quality grade is still one of the most valuable tools available to predict beef tenderness.     

Centimetre-scale digital representations of terrain and impacts on depression storage and runoff

The microscale topography of a 20 × 10 m hillslope in a burned portion of Kootenay National Park, British Columbia, Canada was determined through laser scanning at a sub-centimetre scale. Digital terrain models (DTM) were developed for this hillslope at the 0.75 cm, 10 cm, 25 cm, 50 cm, 75 cm and 1 m scales. Random Roughness, Tortuosity and Mean Upslope Depression were computed for bare and vegetated surfaces created at each resolution to determine mean depression storage as a function of resolution. Results for these various roughness parameters and associated depression storage values are not found to change appreciably between the vegetated and bare surface DTMs, and moreover do not change notably with increasing grid cell resolution. Depression storage was also computed using a GIS-based method, the values of which are considered to be, at the highest resolution of 0.75 cm, the most realistic for comparative purposes. Mean depression storage using this latter approach decreases significantly with an increase in grid cell size, in contrast to the values based on Random Roughness which remain stable with increasing grid cell size. The generation of Hortonian overland flow was modelled at different scales using the GIS-derived DTMs. The values of depression storage for the various scales of DTM are demonstrated to have significant influences on overland flow generation. The scale of the DTM affects the changes over time between the proportion of water going into depression storage and that contributing to overland flow, with more water being retained as depression storage at a particular value of rainfall excess after infiltration for the smaller DTM scalings. When overland flow develops from a rising groundwater table in a simulation exercise, water depths are initially lower than the primary roughness elements on the land surface and water is relatively disconnected. As water depths increase, more integrated connections form.     

Use of ultrasound to predict body composition changes in steers at 100 and 65 days before slaughter

Steers from research crossbreeding projects (n = 406) were serially scanned using real-time ultrasound at 35-d intervals from reimplant time until slaughter. Cattle were evaluated for rump fat depth, longissimus muscle area (ULMA), 12th-rib fat thickness (UFAT), and percentage of intramuscular fat (IMF) to determine the ability of ultrasound to predict carcass composition at extended periods before slaughter. Additional background information on the cattle, such as live weight, ADG, breed of sire, breed of dam, implant, and frame score was also used. Carcass data were collected by trained personnel at "chain speed," and samples of the 12th-rib LM were taken for ether extract analysis. Simple correlation coefficients showed positive relationships (P < 0.01) between ultrasound measures taken less than 7 d before slaughter and carcass measures: ULMA and carcass LM area (CLMA, r = 0.66); UFAT and carcass 12th-rib fat thickness (CFAT, r = 0.74); and IMF and carcass numeric marbling score (r = 0.61). The same correlation coefficients for ultrasound measures taken 96 to 105 d before slaughter and carcass values (P < 0.01) were 0.52, 0.58, and 0.63, respectively. Steers were divided into source-verified and nonsource-verified groups based on the level of background information for each individual. Regression equations were developed for the carcass measurements; 46% of the variation could be explained for CLMA and 44% of CFAT at reimplant time, 46% of the variation in quality grade and 42% of the variation in yield grade could be explained. Significant predictors of quality grade were IMF (P < 0.001), natural log of 12th-rib fat thickness (LUFAT, P < 0.001), and ADG (P < 0.01), whereas LUFAT (P < 0.001), ULMA (P < 0.01), live weight (P < 0.001), hip height (P < 0.001), and frame score (P < 0.001) were significant predictors of yield grade. Regressions using ultrasound data taken 61 to 69 d before slaughter showed increasing R2. Live ultrasound measures at reimplant time are a viable tool for making decisions regarding future carcass composition.     

Timing and order of different insecticide classes drive control of Drosophila suzukii; a modeling approach

The spotted-wing drosophila, Drosophila suzukii Matsumura, is an invasive pest causing significant damage to soft skinned fruits. Control of D. suzukii is critical since there is no tolerance for infested fruit in the market. While most insecticides control one or more D. suzukii life-stages (e.g., egg, larvae, and adult), the impact of insecticides that are toxic to immature stages  is unclear on the subsequent generation of a field population. Insecticides were applied at field recommended rates on cherries and blueberries in the laboratory to determine immature D. suzukii mortality. Spinetoram, cyantraniliprole, malathion, methomyl, spinosad, and phosmet resulted in relatively high mortality of all immature life stages. Zeta-cypermethrin, cyclaniliprole, and fenpropathrin resulted in lower mortality of egg and all larval instars. Malathion was also applied to lowbush blueberries with different fruit sizes (small, medium, and large) in the laboratory and there was no statistical difference in mortality rates depending on fruit sizes. Mortality data from the laboratory experiments were used to parameterize a refined D. suzukii population model. The model revealed that the timing and order of different insecticide classes are important to control D. suzukii population. Model runs that included early applications of more effective insecticides resulted in high immature mortality and greater reduction of D. suzukii populations compared to treatments applied later.

     

Experimental rearing of juvenile New Zealand turbot Colistium nudipinnis (Waite 1910): a potential new aquaculture species

Investigations into factors affecting the growth of the first hatchery-produced juvenile New Zealand turbot Colistium nudipinnis (Waite 1910) showed that this endemic flatfish can be reared in raceways and tanks. After initial high mortality (> 60%) in the post-weaning period (to 120 days post-hatch), the juveniles showed high survival over the grow-out period. Growth of the juveniles was better at lower (16–18 °C) than at higher (> 20 °C) water temperatures, and better in a deep tank than in shallow raceways. Under the experimental rearing conditions, growth (to mean weight of 0.2 kg in 20 months) was relatively slow and food conversion (FCRs > 1.4) relatively high, both factors being related to the feeding behaviour of this species. C. nudipinnis feeds directly from the bottom, and this behavioural characteristic influences aspects of fish farming practice, such as stocking density and feeding strategy, that are critical to its economic viability. There is potential to improve the growth by optimizing the rearing conditions, so that it may not be unrealistic to achieve the maximum growth reached in these trials commercially and produce marketable farmed turbot, of over 400 g weight, within 2 years.     

Interstratified clays as fundamental particles

Materials representing common interstratified clay minerals are shown to be composed of aggregates of fundamental particles. Transmission electron microscopy and x-ray diffraction demonstrate that the x-ray diffraction characteristics of a wide range of interstratification can be modeled experimentally by utilizing materials containing only three types of particles. The data have been incorporated into a new model that regards interstratified clay minerals as populations of fundamental particles whose x-ray diffraction patterns result from interparticle diffraction.