Genetic mapping of AFLP markers in Japanese bunching onion (<Emphasis Type="Italic">Allium fistulosum</Emphasis>)

Summary The first genetic linkage map of Japanese bunching onion (Allium fistulosum) based primarily on AFLP markers was constructed using reciprocally backcrossed progenies. They were 120 plants each of (P₁)BC₁ and (P₂)BC₁ populations derived from a cross between single plants of two inbred lines: D1s-15s-22 (P₁) and J1s-14s-20 (P₂). Based on the (P₂)BC₁ population, a linkage map of P₁ was constructed. It comprises 164 markers – 149 amplified fragment length polymorphisms (AFLPs), 2 cleaved amplified polymorphic sequences (CAPSs), and 12 simple sequence repeats (SSRs) from Japanese bunching onion, and 1 SSR from bulb onion (A. cepa) – on 15 linkage groups covering 947 centiMorgans (cM). The linkage map of P₂ was constructed with the (P₁)BC₁ population and composed of 120 loci – 105 AFLPs, 1 CAPS, and 13 SSRs developed from Japanese bunching onion and 1 SSR from bulb onion – on 14 linkage groups covering 775 cM. Both maps were not saturated but were considered to cover the majority of the genome. Nine linkage groups in P₂ map were connected with their counterparts in P₁ map using co-dominant anchor markers, 13 SSRs and 1 CAPS.     

Elevated atmospheric CO2 concentration alters the effect of phosphate supply on growth of Japanese red pine (Pinus densiflora) seedlings

We demonstrated that the inorganic phosphate (P(i)) requirement for growth of Japanese red pine (Pinus densiflora Sieb. & Zucc.) seedlings is increased by elevated CO(2) concentration ([CO(2)]) and that responses of the ectomycorrhizal fungus Pisolithus tinctorius (Pers.) Coker & Couch to P(i) supply are also altered. To investigate the growth response of non-mycorrhizal seedlings to P(i) supply in elevated [CO(2)], non-mycorrhizal seedlings were grown for 73 days in ambient or elevated [CO(2)] (350 or 700 micromol mol(-1)) with nutrient solutions containing one of seven phosphate concentrations (0, 0.02, 0.04, 0.06, 0.08, 0.10 and 0.20 mM). In ambient [CO(2)], the growth response to P(i) was saturated at about 0.1 mM P(i), whereas in elevated [CO(2)], the growth response to P(i) supply did not saturate, even at the highest P(i) supply (0.2 mM), indicating that the P(i) requirement is higher in elevated [CO(2)] than in ambient [CO(2)]. The increased requirement was due mainly to an altered shoot growth response to P(i) supply. The enhanced P(i) requirement in elevated [CO(2)] was not associated with a change in photosynthetic response to P(i) or a change in leaf phosphorus (P) status. We investigated the effect of P(i) supply (0.04, 0.08 and 0.20 mM) on the ectomycorrhizal fungus P. tinctorius in mycorrhizal seedlings grown in ambient or elevated [CO(2)]. Root ergosterol concentration (an indicator of fungal biomass) decreased with increasing P(i) supply in ambient [CO(2)], but the decrease was far less in elevated [CO(2)]. In ambient [CO(2)] the ratio of extramatrical mycelium to root biomass decreased with increasing P(i) supply but did not change in elevated [CO(2)]. We conclude that, because elevated [CO(2)] increased the P(i) requirement for shoot growth, the significance of the ectomycorrhizal association was also increased in elevated [CO(2)].     

Plantlet regeneration from leaf protoplasts ofPopulus euphratica

Protoplasts were isolated from the leaves of sterile plants ofPopulus euphratica Oliv. by using 1% Cellulase “Onozuka” RS and 0.25% Pectolyase Y-23 in 0.6m of mannitol solution. Protoplasts were cultured in modified Murashige and Skoog's (MS) medium which contained no ammonium ions but was supplemented with BAP (6-benzylaminopurine), 2,4-D (2,4- dichlorophenoxy-acetic acid), and 1% sucrose at the cell density of 9×10⁴/ml. Cell divisions occurred in every culture medium, especially in the medium containing 0.5 mg/l of BAP and 0.1 mg/l of 2,4-D, in which callus was successfully induced by successive culture through cell cluster formation. Shoots were regenerated from the callus, and their growth was enhanced on 1/2 MS medium containing 0.8 mg/l of BAP. Finally, shoots were rooted and plantlets were regenerated on 1/2 MS medium without a hormone. A part of this paper was presented at the 106th Annual Meeting of the Jpn. For. Soc. (1995).     

Investigation of relationships between cell and pulp properties in Eucalyptus by examination of within-tree property variations

 Relationships between cell and pulp properties were investigated by examining the within-tree property variations in Eucalyptus camaldulensis and Eucalyptus globulus. Properties investigated included proportions of ray and axial parenchyma, thickness of cell walls and cell wall percentages. The characteristics of the ray and axial parenchyma (their proportions and wall thickness) were found to have a significant influence on all measured pulp properties, including paper strength properties. Multiple regression of pulp properties in relation to cell properties revealed that nearly all measured pulp properties were explained by cell properties at the 1% significance level. It was concluded, therefore, that all cell types are important for predicting pulp properties, and it is strongly recommended that tree breeding programs for Eucalyptus include the measurement of all cell types. Received 6 July 1999     

Fundamental studies on wood/cellulose-plastic composites: effects of composition and cellulose dimension on the properties of cellulose/PP composite

Although wood/cellulose-plastic composites (WPC) of low wood/cellulose content have been more accepted worldwide and are promoted as low-maintenance, high-durability building products, composites containing high wood/cellulose content are not yet developed on an industrial scale. In this study, flow properties, mechanical properties, and water absorption properties of the compounds of cellulose microfiber/polypropylene (PP) and maleic anhydride-grafted polypropylene (MAPP) were investigated to understand effects of the high cellulose content and the dimensions of the cellulose microfiber. The molding processes studied included compression, injection, and extrusion. It was found that fluidity is not only dependent on resin content but also on the dimension of the filler; fluidity of the compound declined with increased fiber length with the same resin content. Dispersion of the composite was monitored by charge-coupled device (CCD) microscope. Increasing the plastic content in the cellulose-plastic formulation improved the strength of mold in addition to the bond development between resin and filler, and the tangle of fibers. The processing mode affected the physicomechanical properties of the cellulosic plastic. Compression-molded samples exhibited the lowest modulus of rupture (MOR) and modulus of elasticity (MOE) and the highest water absorption, while samples that were injection-molded exhibited the highest MOR (70 MPa) and MOE (7 GPa) and low water absorption (2%).     

Evaluating the durability of wood-based panels using internal bond strength results from accelerated aging treatments

In this study, the durability of wood-based panels was evaluated by comparing the internal bond (IB) strength retention after five different laboratory-based accelerated aging tests with the IB retention after 5 years of outdoor exposure in Shizuoka City. In each accelerated aging test, the IB retention of MDI-bonded panels showed high retention compared to other panels. Outdoor exposure in Shizuoka City resulted in an IB retention value for particleboard (PF) and oriented strandboard (aspen) of less than 10% after the 5-year exposure period. Medium-density fiberboards maintained their initial IB strength over the same period. Calculation of the mean IB retention for all board types allowed comparison of the severity of aging between the accelerated test methods and outdoor exposure. The ASTM six-cycle test method was the most severe among the standard treatment cycles applied.     

Isolation of some glycosides as aroma precursors in young leaves of Japanese pepper (Xanthoxylum piperitum DC.).

To clarify the formation mechanism for the major alcoholic aroma compounds in young leaves of Japanese pepper, the glycosides were isolated as aroma precursors. The presence of glycosides of the main alcoholic aroma constituents was indirectly determined by enzymatic hydrolysis and trifluoroacetylation (TFA) of the glycoside-containing fraction. After Amberlite XAD-2 column chromatography, ODS flash chromatography, and high-performance liquid chromatography (HPLC), two new compounds, namely, (3S,6S)-cis-linalool-3,7-oxide beta-D-glucopyranoside and 2-methylpropanyl 6-O-beta-D-apiofuranosyl-beta-D-glucopyranoside, were isolated. In addition, (3S,6R)-cis-linalool-3,6-oxide beta-D-glucopyranoside, which absolute configuration was the first determined, and six known glycosides, citronellyl beta-D-glucopyranoside, linalyl 6-O-beta-D-apiofuranosyl-beta-D-glucopyranoside, (Z)-3-hexenyl beta-D-glucopyranoside, benzyl 6-O-beta-D-apiofuranosyl-beta-D-glucopyranoside, dendranthemoside A, and 3,6-dihydroxy-5,6-dihydro-beta-ionol 9-beta-D-glucopyranoside, were isolated. All of these glycosides were isolated for the first time from the leaves of Japanese pepper. Their structures were established on the basis of spectral data and chemical evidence. The ratios of stereoisomers of the aglycon moieties of citronellyl beta-D-glucopyranoside and linalyl 6-O-beta-D-apiofuranosyl-beta-D-glucopyranoside were investigated by a chiral GC analysis and compared with those of free citronellol and linalool in the aroma concentrate.     

Purification and characterization of two anionic trypsins from the hepatopancreas of carp

SUMMARY: Two trypsins, designated as trypsin A and trypsin B, have been purified from the hepatopancreas of carp. The purification procedures consisted of ammonium sulfate fractionation, and chromatographies on DEAE-Sephacel, Ultrogel AcA54 and Q-Sepharose. Trypsin A was purified to homogeneity with the molecular mass of approximately 28 kDa, while trypsin B gave two close bands of 28.5 kDa and 28 kDa on sodium dodecylsulfate polyacrylamide gel electrophoresis both under reducing and non-reducing conditions. On native-PAGE, both trypsin A and trypsin B showed a single band. Trypsin A and trypsin B revealed optimum temperature of 40°C and 45°C, respectively, and shared the same optimum pH 9.0 using Boc-Phe-Ser-Arg-MCA as substrate. Both enzymes were effectively inhibited by trypsin inhibitors and their susceptibilities were similar. The NH₂-terminal amino acid sequences of trypsin A and trypsin B were determined to 37th and 40th amino acid residue, respectively. Their sequences were very homologous, but not identical to that of a trypsin-type serine proteinase from carp muscle and these of other trypsins. Immunoblotting test using the antibody raised against trypsin A cross-reacted with trypsin B positively.