去雄对睡莲花瓣开放角度及生理生化特征的影响

为揭示睡莲(基部被子植物)的开花特性,探究雄蕊在睡莲花瓣节律性开放过程中的作用.本研究以蓝鸟睡莲(Nymphaea 'Blue Bird')为实验材料,在去雄(摘除雄蕊)后记录花瓣开放角度和萎蔫时间,并于去雄后第6、24、48及72小时测定花瓣的生理生化指标变化.结果 显示,去雄后睡莲花瓣的开放角度小于对照组,在第48小时与对照组开放角度差异最大,达到49.31°,而去雄后花瓣萎蔫的时间与对照组相同,均出现在第72小时;去雄引起了花瓣多项生理生化指标发生变化,其中,含水量在第24小时与72小时显著低于对照组,比对照组分别低0.7％与0.9％;可溶性糖含量变化显著,在第24小时和48小时比对照组分别高出0.48与0.68 mg/g;脯氨酸(Pro)含量在第72小时显著高于对照组;过氧化物酶(POD)活性从第24小时起比对照组显著升高;而丙二醛(MDA)含量则与对照组无明显差异.以上结果说明,去雄导致了睡莲花瓣开放角度及生理状态发生改变,该发现进一步地揭示了睡莲的开花特性,首次证明了雄蕊对于花瓣节律性开放具有调节作用,为花瓣开放闭合及切花保鲜等领域的研究提供了新的思路.     

Influence of temperature,humidity duration and growth stage on the infection and mycotoxin production by Fusarium langsethiae and Fusarium poae in oats

High occurrence of Fusarium poae (FP) and Fusarium langsethiae (FL) and their mycotoxins nivalenol (NIV) and T-2/HT-2 have been observed in Swiss oats. Early prediction of mycotoxin levels is important for farmers and the cereal industry to minimize the risk of contaminated food and feed. Therefore, climate chamber experiments were conducted to investigate the influence of different temperatures (10, 15, 20 °C) and durations (4, 8, 12 h) at 99% relative humidity (RH) on the infection of oats with FP and FL. In addition, to discover the most susceptible period of oats, artificial FL inoculations were conducted at different growth stages. Field experiments were performed to observe the dispersal of these fungal species within the field and to investigate the weather conditions that influence the dispersal. The climate chamber experiments revealed higher contamination with NIV and T-2/HT-2 in the 10 °C treatments and with a prolonged humidity duration of 12 h 99% RH. Inoculations of oat plants at early (DC 61) and mid (DC 65) anthesis, led to higher FL infection and T-2/HT-2 accumulation in the grains compared with treatments at earlier growth stages, which might be due to an increased susceptibility during anthesis. No indication for spore dispersal was observed in the field experiments. The results obtained, together with the cropping factors that influence infection and mycotoxin production, could be used as a first step in developing forecasting models to predict the contamination of oats with the mycotoxins NIV and T-2/HT-2.     

Utilizing a DUALEM‐421 and inversion modelling to map baseline soil salinity along toposequences in the Hunter Valley Wine district

In the oldest commercial wine district of Australia, the Hunter Valley, there is the threat of soil salinization because marine sediments underlie the area. To understand the risk requires information about the spatial distribution of soil properties. Electromagnetic (EM) induction instruments have been used to identify and map the spatial variation of average soil salinity to a certain depth. However, soils vary with depth dependent on soil forming factors. We collected data from a single‐frequency and multiple‐coil DUALEM‐421 along a toposequence. We inverted this data using EM4Soil software and evaluated the resultant 2‐dimensional model of true electrical conductivity (σ – mS/m) with depth against electrical conductivity of saturated soil pastes (EC_p – dS/m). Using a fitted linear regression (LR) model calibration approach and by varying the forward model (cumulative function‐CF and full solution‐FS), inversion algorithm (S1 and S2), damping factor (λ) and number of arrays, we determined a suitable electromagnetic conductivity image (EMCI), which was optimal (R² = 0.82) when using the full solution, S2, λ = 3.6 and all six coil arrays. We conducted an uncertainty analysis of the LR model used to estimate the electrical conductivity of the saturated soil‐paste extract (EC_e – dS/m). Our interpretation based on estimates of EC_e suggests the approach can identify differences in salinity, how these vary with parent material and how topography influences salt distribution. The results provide information leading to insights into how soil forming factors and agricultural practices influence salinity down a toposequence and how this can guide soil management practices.     

油菜覆膜打孔穴播机打孔装置设计与试验

为实现油菜等小粒径作物覆膜种植中膜上均匀打孔的功能,针对传统膜上成穴装置结构庞大复杂、工作时易黏土挑种及撕挑地膜等问题,设计了一种法兰式滚轮与螺纹式圆锥型锥钉组合式结构的打孔装置,确定了其主要结构参数范围;构建了打孔装置运动学模型,分析了打孔锥钉关键点的运动轨迹,确定了膜上打孔过程,并基于轨迹方程分析了膜孔尺寸参数;运用ADAMS运动学仿真,采用四因素三水平正交试验方法,以打孔锥钉顶角、打孔锥钉直径、打孔滚轮半径、机组前进速度为试验因素,以膜孔长度、膜孔间距偏差为试验考核指标,进行了打孔装置结构和运动参数的仿真试验。仿真结果表明:影响膜孔长度的因素主次顺序为打孔滚轮半径、打孔锥钉顶角、打孔锥钉直径、机组前进速度;影响膜孔间距偏差的因素主次顺序为打孔滚轮半径、机组前进速度、打孔锥钉顶角、打孔锥钉直径;基于参数优化,获得较优参数组合为:打孔锥钉顶角53°、打孔锥钉直径16 mm、打孔滚轮半径65 mm、机组前进速度4 km/h。以打孔装置较优结构参数组合进行了田间验证试验,结果表明:打孔装置所打膜孔形状较规则,普遍呈类圆形状,膜孔长度均在18 mm以上,膜孔间距较为均匀,与仿真结果基本一致;各行膜孔长度一致性变异系数为4.98%,各行膜孔间距均匀性变异系数为3.44%。结果表明试验参数组合选取合理,打孔装置符合设计要求。     

Ray blight of pyrethrum in Australia: a review of the current status and future opportunities

Ray blight caused by Stagonosporopsis tanaceti is one of the most important diseases of pyrethrum (Tanacetum cinerariifolium), a perennial herbaceous plant cultivated for the extraction of insecticidal pyrethrins in Australia. The disease is responsible for complete yield loss in severe outbreaks. Infected seed is considered as the principal source of S. tanaceti. Infection hyphae remain only in the seed coat and not in the embryo, resulting in pre- and post-emergence death of seedlings and latent infection. Therefore, quantification of the level of infection by S. tanaceti within seed using a qPCR assay is important for efficient management of the disease. Stagonosporopsis tanaceti completes its life cycle within 12 days after leaf infection through production of pycnidia and can infect every tissue of the pyrethrum plant except the vascular and root tissues. Ray blight epidemics occur in pyrethrum fields through splash dispersal of pycnidiospores between adjacent plants. Besides steam sterilization, thiabendazole/thiram and fludioxonil are effective seed-treating chemicals in controlling S. tanaceti before planting begins. Ray blight is currently managed in the field through the foliar application of strobilurin fungicides in the first 1–2 years of crop establishment. Later on, difenoconazole and multisite specific fungicides in the next 2–3 years during early spring successfully reduce ray blight infestation. Avoiding development of resistance to fungicides will require more sustainable management of ray blight including the development and deployment of resistant cultivars.     

Mapping QTLs using a novel source of salinity tolerance from Hasawi and their interaction with environments in rice

Background

Salinity is one of the most severe and widespread abiotic stresses that affect rice production. The identification of major-effect quantitative trait loci (QTLs) for traits related to salinity tolerance and understanding of QTL × environment interactions (QEIs) can help in more precise and faster development of salinity-tolerant rice varieties through marker-assisted breeding. Recombinant inbred lines (RILs) derived from IR29/Hasawi (a novel source of salinity) were screened for salinity tolerance in the IRRI phytotron in the Philippines (E1) and in two other diverse environments in Senegal (E2) and Tanzania (E3). QTLs were mapped for traits related to salinity tolerance at the seedling stage.

Results

The RILs were genotyped using 194 polymorphic SNPs (single nucleotide polymorphisms). After removing segregation distortion markers (SDM), a total of 145 and 135 SNPs were used to construct a genetic linkage map with a length of 1655 and 1662 cM, with an average marker density of 11.4 cM in E1 and 12.3 cM in E2 and E3, respectively. A total of 34 QTLs were identified on 10 chromosomes for five traits using ICIM-ADD and segregation distortion locus (SDL) mapping (IM-ADD) under salinity stress across environments. Eight major genomic regions on chromosome 1 between 170 and 175 cM (qSES1.3, qSES1.4, qSL1.2, qSL1.3, qRL1.1, qRL1.2, qFWsht1.2, qDWsht1.2), chromosome 4 at 32 cM (qSES4.1, qFWsht4.2, qDWsht4.2), chromosome 6 at 115 cM (qFWsht6.1, qDWsht6.1), chromosome 8 at 105 cM (qFWsht8.1, qDWsht8.1), and chromosome 12 at 78 cM (qFWsht12.1, qDWsht12.1) have co-localized QTLs for the multiple traits that might be governing seedling stage salinity tolerance through multiple traits in different phenotyping environments, thus suggesting these as hot spots for tolerance of salinity. Forty-nine and 30 significant pair-wise epistatic interactions were detected between QTL-linked and QTL-unlinked regions using single-environment and multi-environment analyses.

Conclusions

The identification of genomic regions for salinity tolerance in the RILs showed that Hasawi possesses alleles that are novel for salinity tolerance. The common regions for the multiple QTLs across environments as co-localized regions on chromosomes 1, 4, 6, 8, and 12 could be due to linkage or pleiotropic effect, which might be helpful for multiple QTL introgression for marker-assisted breeding programs to improve the salinity tolerance of adaptive and popular but otherwise salinity-sensitive rice varieties.

     

Inhibition of postharvest senescence of green leafy vegetables by exogenous D-cysteine and L-cysteine as precursors of hydrogen sulphide

Hydrogen sulphide (H₂S) inhibits senescence in harvested fruit and vegetables but presents logistical, safety and regulatory issues to become a commercial treatment. D-cysteine and L-cysteine are semi-essential amino acids that are metabolised to hydrogen sulphide by plant tissues albeit by different pathways. This paper examines the effect of cysteine on postharvest senescence of three green leafy vegetables. Spraying pak choy leaves with 10 mmol D-cysteine, L-cysteine or DL-cysteine inhibited leaf senescence through a delayed loss of green colour expressed as market life, reduced respiration rate and reduced ethylene production. The beneficial effects of cysteine were similar to those achieved by fumigation with hydrogen sulphide. L-cysteine sprays on parsley and peppermint leaves also showed reduced leaf colour loss and respiration compared to untreated leaves. Cysteine, either as the racemate or individual enantiomers, is considered to have commercial potential for green leafy vegetables as it provides the beneficial effect of hydrogen sulphide but should be easier to register for commercial use due to the GRAS status of L-cysteine.