A PROPOSED RADIOGRAPHIC CLASSIFICATION SCHEME FOR CONGENITAL THORACIC VERTEBRAL MALFORMATIONS IN BRACHYCEPHALIC “SCREW‐TAILED” DOG BREEDS

Congenital vertebral malformations are common in brachycephalic “screw‐tailed” dog breeds such as French bulldogs, English bulldogs, Boston terriers, and pugs. The aim of this retrospective study was to determine whether a radiographic classification scheme developed for use in humans would be feasible for use in these dog breeds. Inclusion criteria were hospital admission between September 2009 and April 2013, neurologic examination findings available, diagnostic quality lateral and ventro‐dorsal digital radiographs of the thoracic vertebral column, and at least one congenital vertebral malformation. Radiographs were retrieved and interpreted by two observers who were unaware of neurologic status. Vertebral malformations were classified based on a classification scheme modified from a previous human study and a consensus of both observers. Twenty‐eight dogs met inclusion criteria (12 with neurologic deficits, 16 with no neurologic deficits). Congenital vertebral malformations affected 85/362 (23.5%) of thoracic vertebrae. Vertebral body formation defects were the most common (butterfly vertebrae 6.6%, ventral wedge‐shaped vertebrae 5.5%, dorsal hemivertebrae 0.8%, and dorso‐lateral hemivertebrae 0.5%). No lateral hemivertebrae or lateral wedge‐shaped vertebrae were identified. The T7 vertebra was the most commonly affected (11/28 dogs), followed by T8 (8/28 dogs) and T12 (8/28 dogs). The number and type of vertebral malformations differed between groups (P = 0.01). Based on MRI, dorsal, and dorso‐lateral hemivertebrae were the cause of spinal cord compression in 5/12 (41.6%) of dogs with neurologic deficits. Findings indicated that a modified human radiographic classification system of vertebral malformations is feasible for use in future studies of brachycephalic “screw‐tailed” dogs.     

The Lunar Laser Ranging Experiment: Accurate ranges have given a large improvement in the lunar orbit and new selenophysical information

The lunar ranging measurements now being made at the McDonald Observatory have an accuracy of 1 nsec in round-trip travel time. This corresponds to 15 cm in the one-way distance. The use of lasers with pulse-lengths of less than 1 nsec is expected to give an accuracy of 2 to 3 cm in the next few years. A new station is under construction in Hawaii, and additional stations in other countries are either in operation or under development. It is hoped that these stations will form the basis for a worldwide network to determine polar motion and earth rotation on a regular basis, and will assist in providing information about movement of the tectonic plates making up the earth's surface. Several mobile lunar ranging stations with telescopes having diameters of 1.0 m or less could, in the future, greatly extend the information obtainable about motions within and between the tectonic plates. The data obtained so far by the McDonald Observatory have been used to generate a new lunar ephemeris based on direct numerical integration of the equations of motion for the moon and planets. With this ephemeris, the range to the three Apollo retro-reflectors can be fit to an accuracy of 5 m by adjusting the differences in moments of inertia of the moon about its principal axes, the selenocentric coordinates of the reflectors, and the McDonald longitude. The accuracy of fitting the results is limited currently by errors of the order of an arc second in the angular orientation of the moon, as derived from the best available theory of how the moon rotates in response to the torques acting on it. Both a new calculation of the moon's orientation as a function of time based on direct numerical integration of the torque equations and a new analytic theory of the moon's orientation are expected to be available soon, and to improve considerably the accuracy of fitting the data. The accuracy already achieved routinely in lunar laser ranging represents a hundredfold improvement over any previously available knowledge of the distance to points on the lunar surface. Already, extremely complex structure has been observed in the lunar rotation and significant improvement has been achieved in our knowledge of lunar orbit. The selenocentric coordinates of the retroreflectors give improved reference points for use in lunar mapping, and new information on the lunar mass distribution has been obtained. Beyond the applications discussed in this article, however, the history of science shows many cases of previously unknown, phenomena discovered as a consequence of major improvements in the accuracy of measurements. It will be interesting to see whether this once again proves the case as we acquire an extended series of lunar distance observations with decimetric and then centimetric accuracy.     

Experiments with controlled langmuir circulations

Laboratory experiments in which wind was blown gently over a regular crossed-wave pattern have clearly shown the existence of regular, steady, and reproducible Langmuir circulations. The circulations were present only when both the wind and the wave patterns existed at the same time. With circulations having an across-wind wavelength of 44 centimeters, the descending vertical motions carried turbulent surface water downward 39 centimeters to the bottom of the wind and wave tank. The observations are in general agreement with the mathematical model of Craik and Leibovich, although further experiments will be required to definitively test the analytical model.     

Schwefeldioxid,Schwefelwasserstoff, nitrose Gase und Ammoniak als ausschließliche S- bzw. N-Quellen der höheren Pflanze

Sulphur dioxid, hydrogen sulphate, nitrous gases, and ammonia as sole source of S and N for higher plants Long duration gasing experiments using SO₂, H₂S, nitrous gases and NH₃, showed, that higher plants can use these gases as only source of S or N respectively, without affecting their normal growth during the whole vegetation period. The sulphur and nitrogen of these high oxidized or high reduced gas forms were taken up by the plants and were also translocated to the roots. The assimilation of sulphur, given as SO₂, was more intensive than that given as H₂S. The uptake of nitrogen, given as ammonia, was higher than that given as nitrous gases.     

Growth and survival of juvenile red drum,Sciaenops ocellatus,acclimated to freshwater at three different stocking densities in a partial recirculation system

Preliminary technical baseline information for the inland culture of juvenile red drum, Sciaenops ocellatus, in a freshwater fish hatchery is presented. Three initial stocking densities (d₁ = 83, d₂ = 167, and d₃ = 250 fish/m³) were tested in a semirecirculation system for 575 days using a commercially available feed (48.1% protein, 25% lipids, and 0.13% fiber). Initial and final mean fish weight were 7.11 ± 0.02 g and 287.6 ± 27 g. As carrying capacity appeared to have been reached, only data from Days 1–333 were analyzed. One‐way ANOVA analyses indicated that the survival rate of the smaller density (d₁ =40 ± 3.7%) was significantly different from the other two densities (d₃ = 21 ± 1.1% and d₂ = 23 ± 1.0%), which did not differ between them. Absolute growth rate (0.87 ± 0.02 g/day) was not significantly different between densities (F = 0.23. p = .801). Neither was weight significantly different between treatments. There were significant differences in the feed conversion rate (FCR) between densities (F = 8.54; p = .02). FCR for d₁ was significantly lower than for the two other densities, which did not differ from each other. A von Bertalanffy growth model was adjusted (R² = 0.95), and weight–length relationship presented negative allometric values (b = 2.85, R² = 0.98).     

Residence Time Distribution and Barrel Fill in Pet Food Twin‐Screw Extrusion Cooking

The residence time distribution and barrel fill of pet food in a twinscrew extruder was determined under conditions of a constant ratio of feed rate to screw speed. Specific feeding load was held constant at 0.16 kg/hr/ rpm while feed rate ranges were 24–56 kg/hr and screw speed ranges were 150–350 rpm. The residence time rapidly decreased as feed rate and screw speed increased. The spread of the residence time distribution (RTD) was smaller at higher feed rates and screw speed, however analysis of the normalized RTD indicated greater mixing. The barrel fill was constant at ≈50% throughout the range of experimental conditions.     

Formation of Resistant Starch by a Twin-Screw Extruder

The objective of this study was to evaluate the potential to increase the level of resistant starch (RS) in extruded products by optimizing extruder conditions. Three experiments were conducted as randomized complete block designs with two replicates. In the first experiment, corn starch, wheat starch, and potato starch were added at a level of 30% (w/w) to degerminated yellow corn meal to investigate the influence of starch type. In the second experiment, citric acid (CA) monohydrate was added to corn meal at levels of 0, 2.5, 5, and 7.5% (w/w). The third experiment was a full-factorial arrangement to evaluate the effect of high-amylose corn starch (HACS) level (0, 15, 30%, w/w) and CA level (0, 5, 7.5%, w/w) at two screw speeds (200 and 300 rpm). In the first experiment, the means for RS plus dietary fiber for the different starch formulations ranged from 1.27 to 2.28%. In experiment 2, adding CA increased RS plus dietary fiber content to a maximum of 5.23% at 7.5% CA. In the third experiment, the means for RS plus dietary fiber ranged from a low of 1.75% for 100% corn meal at 300 rpm to 14.38% for 7.5% CA and 30% HACS at 200 rpm. The results indicated a highly significant positive relationship between CA and RS formation and the same for amylose content. The RS formation had a negative relationship with screw speed, but the influence of screw speed was small when compared with that of CA and HACS.     

The structure of a mycobacterial outer-membrane channel

Mycobacteria have low-permeability outer membranes that render them resistant to most antibiotics. Hydrophilic nutrients can enter by way of transmembrane-channel proteins called porins. An x-ray analysis of the main porin from Mycobacterium smegmatis, MspA, revealed a homooctameric goblet-like conformation with a single central channel. This is the first structure of a mycobacterial outer-membrane protein. No structure-related protein was found in the Protein Data Bank. MspA contains two consecutive beta barrels with nonpolar outer surfaces that form a ribbon around the porin, which is too narrow to fit the thickness of the mycobacterial outer membrane in contemporary models.