Variability in the performance of juvenile Chinook salmon is explained primarily by when and where they resided in estuarine habitats

Estuarine habitats provide rearing opportunities for the juvenile life stage of anadromous fishes. Because survival is positively correlated with juvenile performance, these estuarine habitats play an important role in population abundance and productivity. To provide information for the recovery of several depressed stocks of Chinook salmon in the Columbia River Basin, we sought to identify the factors that explain variability in performance. Using otolith‐derived estimates of juvenile somatic growth rate as an index of recent performance, we observed a negative nonlinear relationship between growth rate and day of year, and a decreasing and increasing trend of growth rate over the 8 years of this study and distance from the river mouth respectively. Using a generalised linear modelling approach, we found that variability in juvenile somatic growth rate was best explained by where and when individuals were collected, their body size, contaminant loads, stock of origin, and whether a fish was hatchery produced or unmarked. Lastly, we argue that a considerable improvement to the growth rate of juveniles in estuarine habitats is physiologically possible. The results of this 8‐year study provide a baseline of the performance of juvenile Chinook salmon to evaluate habitat restoration programs and to compare against future anthropogenic conditions.     

γ⁃戊内酯的制备及其在纤维素生物质转化方面的应用

γ-戊内酯是以木质纤维素生物质为原料制备的一种潜力巨大的平台化合物,它既可转化为高密度燃料、相关高分子材料以及其他高价值化学品,也可作为绿色溶剂促进木质生物质向其他高值方向转化。在化石能源日益紧俏、环境问题日益严重的今天,对γ-戊内酯进行深入研究显得尤为重要。但在实际生产中,仍存在产量低、除杂难等经济环保类问题需要解决。基于γ-戊内酯研究的最新进展,从γ-戊内酯的制备与应用两方面进行了论述,综述了生物质催化生产γ-戊内酯的研究进展,说明不同底物生产γ-戊内酯的理论基础与优缺点,并以贵金属和非贵金属催化剂为界,分类讨论了多种用于合成γ-戊内酯的催化剂。最后,结合γ-戊内酯在纤维素生物质转化应用方面的进展情况,探索了γ-戊内酯与其他相关有机物之间的制备关系,为γ-戊内酯的进一步开发利用提供了思路。     

施用锌肥和遮阴互作对花生生长发育、抗病性及产量的影响

采用大田裂区试验，研究了施用锌肥和不同遮阴程度互作对花生生长发育、抗病性及产量的影响。结果表明，与不施锌肥相比，施用锌肥能提高花生不同部位锌含量、增加叶片SPAD值，提高花生叶片中可溶性糖、蛋白质和生长素含量，减少花生病害的发生，平均降低7.1个百分点，花生产量平均增加19.4%。相同施锌水平下，随着遮阴程度的增加，花生不同部位锌的含量和不同生育期叶片SPAD值以及花生叶片中可溶性糖、蛋白质和生长素含量呈增加趋势，花生的发病率比不遮阴对照增加4.8、10.2个百分点，花生产量平均降低16.5%、10.0%。在30%、70%的遮阴条件下，施用锌肥的花生产量比不施锌的分别提高21.1%、25.0%。本试验条件下，施用七水硫酸锌30 kg/hm2，使花生具有较强的抗低温寡照能力及抗病性能，增产显著，可在花生产区推广应用。     

黄瓜耐弱光性的多元统计分析

 利用遮阳网模拟弱光条件, 调查18份黄瓜自交系苗期生长发育和生理生化指标, 采用多元统计分析方法评价黄瓜品系耐弱光性强弱。结果表明, 参试品系的13个指标在品系间存在显著差异, 利用因子分析将这些指标综合成5个主因子, 累计贡献率达85.62%。对旋转后的因子得分进行聚类分析, 供试品系可分为4类: 耐弱光材料M₂₂、M₄₃、M_a9; 较耐弱光材料M₈、M₁₁、M₃、M₄、M₃₄; 弱光中度敏感材料M₁₂、M₂₁、M₁₄、M₂、M_a1、M₂₈和弱光敏感材料M₁₀、M₄₄、M₃₂、M₃₆。经过弱光处理后耐弱光指数较大、光合速率降低幅度较小的品系耐弱光性强, 应结合耐弱光指数与光合、生长等因子综合进行黄瓜耐弱光性鉴定。     

COMPUTED TOMOGRAPHY-GUIDED PERCUTANEOUS BIOPSY: CRITERIA FOR ACCURATE NEEDLE TIP IDENTIFICATION

Precise localization of the needle tip during CT-guided percutaneous biopsy is considered to be a key element of a successful procedure. To ensure accuracy, the true needle tip must be differentiated from a false or simulated tip which appears when the CT slice encompasses only the shaft of an angled needle. By obtaining images of an aspiration biopsy needle inserted vertically into a phantom and then incrementally tilting the gantry, the authors were able to compare the characteristic features of the true tip to the simulated tip. The true tip was abrupt and distinct and had an adjacent flame-like low density artifact. The simulated tip was indistinct and tapered, yet still produced the adjacent artifact. We concluded that the shape and distinctness of the end portion of the needle itself, rather than the attendant artifact, were the most reliable criteria for accurate needle tip identification.     

Capnographic documentation of nasoesophageal and nasogastric feeding tube placement in dogs

Objective: To evaluate the ability of capnography to document proper placement of nasoesophageal (NE) and nasogastric (NG) feeding tubes. This study was conducted in 3 phases. Phase I of this study was designed in order to test the efficacy of capnography to distinguish placement of a feeding tube in the alimentary tract versus the respiratory tract. Phase II was designed in order to document that carbon dioxide (CO₂) could be measured through a polyvinyl chloride (PVC) feeding tube. Phase III was performed in order to evaluate the technique of continuous monitoring during insertion of the feeding tube into the esophagus and stomach as would be performed during a clinical‐tube placement. Design: Prospective study. Setting: Research laboratory. Animals: 24 adult dogs. Interventions: In Phase I, sedated dogs were instrumented with an intratracheal catheter and an 8 French feeding tube placed nasally into the distal esophagus and later advanced into the stomach. In Phase II, dogs were anesthetized and an 8 French feeding tube was placed down the endotracheal tube, then into the esophagus and later advanced into the stomach. In Phase III, sedated dogs were instrumented with an 8 French feeding tube inserted intranasally and then advanced to the level of the nasopharynx, distal esophagus and, lastly, the stomach. Fluoroscopy was used in order to determine location of the feeding tube. Measurements and main results: Phase I measurements included respiratory rate and CO₂ from the trachea, esophagus, and stomach and pH of gastric fluid sample. Phase II measurements included respiratory rate and CO₂ from the endotracheal tube, feeding tube in the endotracheal tube, feeding tube in the distal esophagus, and feeding tube in the stomach. Phase III data collection included respiratory rate and CO₂ as the tube was passed through the nasal cavity, nasopharynx, esophagus and stomach. Phase I fluid samples were collected from 5 of the 9 dogs and had pH values from 1.68 to 4.20. In both phases, values for the respiratory rate and CO₂ from the esophagus and stomach were 0 ± 0, significantly lower (P < 0.001) than the values from the trachea. In Phase II, there was no significant difference between the respiratory rates (P = 0.886) and CO₂ (P = 0.705) readings obtained from the endotracheal tube compared to readings from the feeding tube in the endotracheal tube. In Phase III, there was a significant difference (P < 0.001) between the respiratory rates and CO₂ readings obtained from the nasal cavity and the nasopharynx when compared to those readings obtained from the esophagus and stomach. Measurement of CO₂ and respiratory rate resulted in a reading of 0 every time the feeding tube was in the esophagus or stomach. Conclusions: Capnography may be used in order to detect airway placement of NE and NG tubes.     

Morphologic changes in the mammary gland of megestrol acetate-treated and untreated cats: a retrospective study

Abnormal mammary gland growth is a side effect of progestin therapy in some cats. In this retrospective study, the nature and significance of morphologic changes in the mammary gland of 17 megestrol acetate (MA)-treated cats were compared to mammary lesions in 97 untreated cats. Fourteen out of 17 MA-treated cats had non-neoplastic mammary lesions including fibroepithelial hyperplasia (nine cats), lobular hyperplasia (three cats), and duct ectasia (two cats); whereas three MA-treated cats had mammary neoplasms including one adenoma and two carcinomas. Although MA has been causally linked to mammary cancer in cats, only mammary fibroepithelial hyperplasia was clearly associated with MA therapy in this study. Fibroepithelial hyperplasia occurred in older (average age 8.1 years) neutered male and female cats in the MA-treated group and in younger (average age 2.1 years) female cats in the untreated group. Morphologically, both intraductal and solid fibroepithelial growth patterns were seen. Intraductal fibroepithelial hyperplasia was further subdivided into papillary and circumferential types. An apparent greater association between MA therapy and the intraductal types of fibroepithelial hyperplasia was noted. Furthermore, it appears likely that mammary lobular hyperplasia also is linked to MA therapy. Possible mammatrophic effects of MA and other growth-promoting agents in the cat are discussed.     

Effect of hot-fat trimming on factors associated with the subprimal yield of beef carcasses.

Thirty-two crossbred cattle (steers = 17; heifers = 15) exhibiting an ultrasound fat thickness at the 12 to 13th rib region of at least 10 mm were selected from a slaughter shift at a commercial packing plant. After splitting, alternating sides of each carcass were trimmed of 1) subcutaneous fat in excess of 6.4 mm; 2) all kidney, pelvic, and heart fat; and 3) all cod or udder fat and fat in the flank region. Both sides of each carcass were fabricated into subprimals (final trim level of 6.4 mm) according to normal industry procedures. Effect of hot-fat trimming, yield grade (3, 4, and 5), and gender on hot-fat trim, fabrication fat trim, major subprimal, and total subprimal yield of untrimmed and trimmed carcasses were determined. Higher numerical yield grade (YG) corresponded with higher (P less than .05) percentages of hot-fat trim. Hot-fat trimming increased (P less than .05) the difference in fabrication fat trim between steers and heifers and between YG 3 and YG 5. Steers and heifers differed (P less than .05) in percentage of major subprimals and total subprimals when processed conventionally, whereas hot-fat trimming eliminated this difference (P less than .05). Untrimmed YG 3 carcasses had 3.1 and 5.0% higher major subprimal yield (P less than .05) than untrimmed YG 4 and YG 5 carcasses, respectively, whereas hot-fat trimming reduced this difference to 2.5% for YG 4 and to 3.7% for YG 5.(ABSTRACT TRUNCATED AT 250 WORDS)