Preparation and properties of solid polymer electrolyte based on imidazolium-based ionic liquids for structural capacitors

We prepared solid polymer electrolytes (SPEs) composed of poly(ethylene glycol) monomethyl ether acrylate (1A9OMe) and 1-ethyl-3-methylimidazolium trifluoromethanesulfonate ([EMIm][OTF]) and 1-ethyl-3-methylimidazolium bis(trifluoromethane sulfonyl) imide ([EMIm][TFSI]) as the ionic liquid. The SPEs formed by appropriately adding ionic liquids in the 1A9OMe prior to thermal cure. The ratio of 1A9OMe and ionic liquid was 1:9, 3:7, and 5:5, respectively. The characterization of solid polymer electrolytes were investigated using Fourier transform infrared spectroscopy in the attenuated total reflectance mode (FTIR-ATR), Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and glavanostatic charge-discharge test. The highest ionic conductivity of SPEs was found to be 4.90×10^?4 S/cm in a 1A9OMe/[EMIm][OTF] of 3:7. As IL contents were increased, the specific capacitance of supercapacitor was increased. The specific capacitance of supercapacitor for ionic liquid with large ion size was lower than that for ionic liquid with smaller ion size.     

The persistence of inter‐regional hierarchy in technology transfer networks: An analysis of Chinese patent licensing data

This paper asks whether the technological development of a nation reduces the inter‐regional hierarchy in knowledge flow. We examine two scenarios that are the alternative to each other. The first is what we call the globalization of regional innovation system/weakening of inter‐regional hierarchy scenario: As many regions develop their niches in the global economy, the national “anchor” region loses its relative importance as the importer and distributor of new knowledge, rendering the domestic inter‐regional hierarchy less significant as a result. The second scenario is the globalization of national innovation system/persistence of inter‐regional hierarchy. The nation’s traditional anchor region becomes even more active in importing technology and distributing it to other regions of the country. To test which scenario is closer to reality, we employ social network metrics to analyse inter‐regional technology diffusion networks using Chinese patent licensing data for the 1998–2013 period. Our findings support the second scenario, showing that the influence of the traditional anchor region persists in the hierarchical network structure as new cities enter the network. We found five anchor regions: the three usual suspects—Beijing, Shanghai and Shenzhen—plus two that were slightly less expected—Dongguan and Suzhou.     

Prevalence of the enteroaggregative Escherichia coli heat-stable enterotoxin 1 gene and its relationship with fimbrial and enterotoxin genes in E. coli isolated from diarrheic piglets.

A total of 720 Escherichia coli strains isolated from diarrheic piglets on 756 swine farms were screened for the presence of the enteroaggregative E. coli heat-stable enterotoxin 1 (EAST1) gene by polymerase chain reaction (PCR). Escherichia coli strains that carried EAST1 genes were also tested by PCR for the presence of 4 fimbriae (F4, F5, F6, F41), 2 heat-stable enterotoxins (STa and STb), and 1 heat-labile enterotoxin (LT) gene. One hundred sixty-four (22.7%) of the 720 E. coli isolates carried genes for EAST1. Of these 164 isolates, 62 (37.8%) carried EAST1 genes only, 11 (6.7%) carried genes for at least 1 of the fimbrial adhesins, 51 (31.1%) carried genes for at least 1 of the enterotoxins, and 40 (23.8%) carried genes for at least 1 of the fimbrial adhesins and enterotoxins. Forty-six percent of strains that carried EAST1 genes carried STa genes, and 16% of strains that carried EAST1 genes carried F4. The isolation rate of enterotoxigenic E. coli strains carrying genes for EAST1 gene was 63%. The 6 major genotypes observed in this study (in decreasing order) were EAST1+, EAST1+STa+, EAST1+STa+STb+, EAST1+STa+F5+, EAST1+STa+F4+, and EAST1+STb+F4+. EAST1 is widely prevalent among diarrheagenic strains of E. coli and may represent an important virulence determinant in the pathogenesis of enteric colibacillosis of preweaned pigs.     

The Effect of Exogenous Hormone Treatment on Spermiation in Rhynchocypris oxycephalus (Sauvage and Dabry)

For the evaluation of hormonal control of spermiation in fish, a method to quanify the spermiation response of mature Rhynchocypris oxycephalus (Sauvage and Dabry) to hormonal therapy is described. Spermatocrit was determined after 7 min centrifugation at 18,000 ± g and sperm density was estimated by a standard hemocytomer method. Sperm density can be predicted from spermatocrit since their relationship is linear as described by the regression equation, Y = 3.68X - 27.18 ( R ² = 0.82, N = 50). where Y is spermatocrit and × is sperm density. Milt production by mature R. oxycephalus was highest at 24 h after injection of 1,000 IU human chorionic gonadotropin (HCG) and 50 μg luteinizing hormone-releasing hormone analogue (LHRHa) per kg body weight. Increased milt production coincided with low spermatocrit and sperm density levels. These results demonstrate that spermiation in mature R. oxycephalus can be reliably evaluated by a spermatocrit method and that HCG and LHRHa are effective in stimulating of spermiation in this species.     

Feeding behaviour in chickens given diets containing medium chain triglyceride

1. The effect of dietary medium chain triglyceride (MCT) on short‐term food intake was compared with the effect of long chain triglyceride (LCT) in chickens. Maize oil was used as the LCT while glyceryl tricaprylate (C 8) and glyceryl tricaprate (C 10) were used as MCT. Cumulative food intake was determined during the 6 h after the start of feeding.

2. Chicks were given diets containing 200 g C 8/kg diet, 200 g C 10/kg diet or 200 g LCT/kg diet in experiment 1. As early as 30 min after feeding, cumulative food intake in both MCT‐supplemented diets decreased significantly compared with the diet containing LCT.

3. To determine if endogenous cholecystokinin (CCK) was responsible for the decrease in food intake caused by MCT, birds were injected with the CCK‐A receptor antagonist devazepide (DVZ, 1 mg/kg BW) before diet presentation. DVZ had no effect on food intake with either LCT‐ or MCT‐supplemented diets.

4. In experiment 3, chicks were given a choice between either diets containing LCT and C 8, LCT and C 10, or C 8 and C 10 to confirm whether or not the palatability of the diets was influenced by the dietary fat sources. There was no difference in food intake between C 8 and C 10‐supplemented diets. However, chicks preferred the LCT‐supplemented diet compared with either of the diets containing MCT.     

Effects of oral administration of different dosages of carvacrol essential oils on intestinal barrier function in broilers

Essential oils are widely used in the pharmaceutical, food and cosmetic industries, and many plant essential oils have shown that they have positive effects on broilers nutrition. This experiment was conducted to study the effects of orally administered different dosages of carvacrol essential oils on intestinal barrier function in broiler chickens. A total of eighty 28‐day‐old (1.28 ± 0.15 kg) ROSS 308 broilers were randomly allocated to four groups of 20 replicates each, with one chicken per replicate per cage, and all were fed with the same diet. Four experimental groups were orally administered 0, 200, 300 or 400 μl carvacrol essential oils at 18:00 hr every day during the 2‐week experimental period. As a result of which, the gene expression of the occludin, claudin‐1, claudin‐5, ZO‐1 and ZO‐2 in intestinal mucosa of small intestine (p < 0.05) and the goblet cell content in small intestine epithelium (p < 0.05) were significantly increased; test subjects with 300 or 400 μl carvacrol essential oils reduced the microbial counts of Salmonella spp. and Escherichia coli in the intestines (p < 0.05); Essential oils administration also significantly increased activity of the sucrase (p < 0.05) and lactase (p < 0.05) in intestinal mucosa. In conclusion, the carvacrol essential oils have positive effects on growth performance and intestinal barriers function of broilers; those effects may be related to the dosage, as administration of 300 or 400 μl was more effective than that of 200 μl.     

Effects of Dietary Supplementation of Barodon on Growth Performance,Innate Immunity and Disease Resistance of Juvenile Olive Flounder,Paralichthys olivaceus,Against Streptococcus iniae

This study was conducted to evaluate the effects of dietary supplementation of Barodon, an anionic alkali mineral complex, on growth, feed utilization, humoral innate immunity and disease resistance of olive flounder. A basal experimental diet was used as a control and supplemented with 0.1, 0.2, 0.3, 0.4, or 0.5% Barodon. Triplicate groups of fish (26.4 ± 0.2 g) were fed one of the diets to apparent satiation twice daily for 10 wk. The growth performance was enhanced (P < 0.05) linearly and quadratically in fish fed diets containing Barodon compared with that in fish fed the control. Feed utilization was significantly improved by Barodon supplementation. Serum lysozyme and antiprotease activities were increased quadratically in Barodon fed groups. Also, significantly higher superoxide dismutase activity was found in Barodon‐fed fish. Dietary supplementation of 0.1–0.3% Barodon resulted in significant enhancement of fish disease resistance against Streptococcus iniae. The findings in this study indicate that dietary supplementation of Barodon can enhance growth, feed utilization, innate immunity, and disease resistance of olive flounder and that the optimum level seems to be 0.1% in diets.     

The grafting of recycled polyol from waste polyurethane foam onto new polyurethane and its impact on shape recovery and water vapor permeation

Recycled polyols from waste polyurethane (PU) foams were grafted onto PU to improve the properties such as tensile strength, shape recovery, low-temperature flexibility, and water compatibility. The recycled polyol was either purified by column chromatography before grafting or was used directly for grafting. The soft segment melting temperature of PU did not notably increase with the addition of polyol, whereas the glass transition temperature increased with increased polyol content. The tensile strength sharply increased at low polyol content and decreased at high polyol content, while the strain at break did not significantly change with an increase in polyol content. The shape recovery at 10 oC notably improved compared with unmodified PU and remained high after four cyclic tests. Polyol-grafted PU demonstrated better lowtemperature flexibility and reduced the water vapor permeability of PU membranes. Overall, grafting recycled polyol onto PU significantly improved the tensile stress, shape recovery, and low-temperature flexibility of PU.