Application of acoustic Doppler current profiler combined with a scientific echo sounder for krill Euphausia pacifica density estimation

ABSTRACT:   An application of the acoustic Doppler current profiler (ADCP, 153.6 kHz) in combination with a scientific echo sounder (EK60, 38 and 200 kHz) was investigated to estimate the density of krill Euphausia pacifica . The acoustic backscattering strength from sound scattering layers was compared with biomass estimates from midwater trawls. Euphausia pacifica was targeted among mixed species populations in the sound scattering layer in the offshore Funka Bay area of Hokkaido, Japan. The frequency characteristics of acoustic backscattering by krill were calculated using a distorted wave Born approximation scattering model at three frequencies. Krill aggregations identified from the EK60 data were extracted as the mean volume backscattering strength difference between two frequencies. They were then used to identify similar aggregations in the ADCP data by matching observation times and depths for the two methods, which were applied simultaneously. Results from the comparison of the mean volume backscattering strength and the density calculated from the ADCP and EK60 showed that ADCP can be used to measure density and spatial–temporal distribution of krill aggregations. Current speed and direction at the study site were found to be 16.1 cm/s and 187.0°, respectively, and krill speed and direction (including the current component) were found to be 19.8 cm/s and 172.2°, respectively. Based on the ADCP data, the net speed and direction of the krill aggregations were found to be 5.9 cm/s and 128.0°, respectively.     

Dyeability of Chemically Treated Wood and its Discoloration by UV-ray Irradiation

INTRODUCTION Wood is far from a stable material. One of the biggest challenges for woodworking is learning to work within the constraints of wood properties. Discoloration of wood directly influences the decorative performance of wood products. Therefore, the degree of color change is a critical factor that determines the utilization area of dyed wood (Sakuragawa Satoshi, 1996). Discoloration has occurred because the wood components and dye molecules are degraded by UV-ray (Kaneko Shin…     

Transverse swelling behavior of hinoki (Chamaecyparis obtusa) revealed by the replica method

Transverse swelling and its anisotropy in hinoki (Chamaecyparis obtusa) in several kinds of organic liquids and in water were investigated by means the replica method. There was more cross-sectional swelling of cell walls and cell wall thickness in earlywood than in latewood. Marked swelling toward cell lumens was observed in wood swollen in liquids that had higher swelling potentials than water. This suggests that the swelling of cell walls in these liquids is much greater than the external swelling. Feret's diameters of the cell lumens were reduced by swelling in all the observed cases except in the tangential direction of earlywood, suggesting that cell walls swell to a much less extent in width than in thickness. Deformation of cell shapes caused by the tensile force from the latewood were observed in the earlywood and in the transitional region from earlywood to latewood. When swollen in water, transverse swelling anisotropy caused only by the swelling in cell wall thickness were calculated to be 1.2 for the whole region over an annual ring and 1.4 for the earlywood. These values could not account for the external swelling anisotropy of 2.1. Considering obvious deformations of cell shapes in the earlywood and in the transitional region, we conclude that the interaction between earlywood and latewood is one of the prime factors contributing to the transverse swelling anisotropy of coniferous wood.Part of this report was presented at the 48th Annual Meeting of the Japan Wood Research Society, Nagoya, April 1998     

Mechanical properties of wood in an unstable state due to temperature changes,and analysis of the relevant mechanism IV: effect of chemical components on destabilization of wood

In order to investigate the effects of chemical components and matrix structure on the destabilization of quenched wood, we examined the physical and mechanical properties of steam-treated wood, hemicellulose-extracted wood, and delignified wood, which were treated at different levels. For steam-treated and hemicellulose-extracted wood,the relative relaxation modulus of the quenched sample was lower than that of the respective control sample. For delignified wood, the relative relaxation modulus fell with weight loss and reached a minimum value at a certain weight loss, and subsequently increased significantly. The hygroscopicity of all treated samples changed slightly by steaming, whereas increased with removing the component. More-over, the average volumetric swelling per 1% MC at 100% relative humidity (RH) was less than at 75% RH and 93% RH for component-removed wood. It was clear that a void structure existed. As a result, the destabilization evaluated by the fluidity (1 - E _t/E ₀) of steam-treated wood was influenced by the amount of adsorbed water. For component-removed wood, destabilization increased temporarily at lower weight loss because of nonuniform cohesive structure. At high weight loss, destabilization will decreased because capillary-condensed water gathered in the voids and obstructed the motion of adsorbed water. However, the destabilization of all treated wood changed less than that of chemically modified wood.     

饱水和气干状态杉木的压缩成型及其热处理永久固定

该研究采用烘箱热处理和真空热处理方法 ,在热处理温度都为 180℃ ,热处理时间分别为 6,10 ,15 ,2 5h的条件下 ,研究比较了饱水状态和气干状态杉木试材的径向压缩成型特性及其在不同方式热处理条件下热处理永久固定的效果 .研究结果表明 :①在相同条件下 ,与气干状态杉木试材相比 ,饱水并经蒸煮的试材在压缩成型后 ,或经热处理后 ,其回复率Rs 较小 ,各项物理力学性质较好 ;②在热处理过程中 ,对照试材的重量损失率WL随着热处理时间的延长而增大 ,而且 ,WL与Rs 之间呈近似线性负相关 ;③在相同条件下 ,与空气介质中热处理相比 ,真空中热处理后试材的材色变化较小 ,但回复率较大     

Liquid penetration of precompressed wood VI: Anatomical characterization of pit fractures

Pit fractures of refractory coniferous heartwoods caused by precompression in the radial direction were investigated and are discussed in terms of improved liquid penetration. Small cracks appeared at the boundary between the torus and margo, along the outer margin of the margo, and on the torus when specimens were compressed and deformation was fixed by drying. The remarkable cracks were generally observed for Cryptomeria japonica D. Don. Pseudotsuga menziesii Franco showed peculiar detachment of the torus from the pit border, and Larix leptolepis Gordon exhibited only small cracks on the torus. These fractures patterns were clearer when the precompressed specimens were recovered by water impregnation and then redried.This report was presented at the 46th Annual Meeting of the Japan Wood Research Society, Kumamoto, April 1996     

In Vitro Suppression of Mycelial Growth of Fusarium oxysporum by Extracellular Chitosanase of Sphingobacterium multivorum and Cloning of the Chitosanase Gene csnSM1

A chitosan-degrading bacterium, isolated from field soil that had been amended with chitin, was identified as Sphingobacterium multivorum KST-009 on the basis of its bacteriological characteristics. The extracellular chitosanase (SM1) secreted by KST-009 was a 34-kDa protein and could be purified through ammonium sulfate precipitation, gel permeation column chromatography and SDS polyacrylamide gel electrophoresis. A chitosanase gene (csnSM1) was isolated from genomic DNA of the bacteria, and the entire nucleotide sequence of the gene and the partial N-terminal amino acid sequence of the purified SM1 were determined. The csnSM1 gene was found to encode 383 amino acids, 72 N-terminal amino acid residues were processed to produce the mature enzyme during the secretion process. Germinated microconidia of four formae speciales (lycopersici, radicis-lycopersici, melonis, and fragariae ) of Fusarium oxysporum were treated with SM1. Chitosanase treatment caused morphological changes, such as swelling of hyphal cells or indistinctness of hyphal cell tips and cessation or reduction of mycelial elongation. Received 2 May 2001/ Accepted in revised form 21 June 2001     

Characterization of major,unused, and unvalued Indonesian wood species I. Dependencies of mechanical properties in transverse direction on the changes of moisture content and/or temperature

Mechanical property changes due to the moisture content (MC) and/or temperature changes were examined for 15 Indonesian wood species. A static bending test was carried out at 20°C, 65% relative humidity (air-dry), and water-saturated at 20°C (wet-20) and 80°C (wet-80). For individual test conditions, modulus of elasticity (MOE) and modulus of rupture (MOR) increased linearly with specific gravity regardless of wood species; however, maximum deflection did not correlate with specific gravity for any MC or temperature conditions. The relative values of MOE and MOR measured in wet-20 to air-dry conditions were variously affected from slightly to strongly depending on the wood species. However, the relative values always decreased markedly when saturated in water at 80°C, regardless of wood species. The relative MOE, MOR, and maximum deflection values due to the change in MC or MC and temperature combined were independent of specific gravity but may be dependent on wood type: softwood or hardwood.     

Erratum to: Mechanical properties of wood in an unstable state due to temperature changes,and analysis of the relevant mechanism III: Effect of quenching on stress relaxation of chemically modified woods

In order to understand the mechanism of destabilization occurring when wood is quenched, we applied chemical modifications, and controlled the number of moisture adsorption sites in wood. The degree of destabilization was evaluated according to the fluidity (1-E _t/E ₀), increase in fluidity, and relative fluidity in relation to the nonmodified wood, and was discussed by comparing these quantities with the hygroscopicity or swelling of wood. We found that destabilization of chemically modified wood was lower than that in nonmodified wood, and the amount of adsorbed water controlled the magnitude of flow of wood. Moreover, according to the analysis of water state by the Hailwood-Horrobin equation, it was shown that the function of dissolved water to the fluidity is almost identical for both chemical modifications, whereas hydrated water has more effect on acetylated wood than on formaldehydetreated wood. We speculate that the motion of water molecules due to quenching accompanied with the redistribution of energy resulting from the exchange of their potential energy and movement to attain a new balance, and the introduced acetyl groups and cross-linking restrict the water molecule movement. An erratum to this article is available at .