Silvicultural treatments enhance growth rates of future crop trees in a tropical dry forest

Silvicultural treatments are often needed in selectively logged tropical forest to enhance the growth rates of many commercial tree species and, consequently, for recovering a larger proportion of the initial volume harvested over the next cutting cycle. The available data in the literature suggest, however, that the effect of silvicultural treatments on tree growth is smaller in dry forests than in humid forest tree species. In this study, we analyze the effect of logging and application of additional silvicultural treatments (liana cutting and girdling of competing trees) on the growth rates of future crop trees (FCTs; i.e., trees of current and potentially commercial timber species with adequate form and apparent growth potential). The study was carried out in a tropical dry forest in Bolivia where a set of 21.25-ha plots were monitored for 4 years post-logging. Plots received one of four treatments that varied in intensity of both logging and silvicultural treatments as follows: normal (reduced-impact) logging; normal logging and low-intensity silviculture; increased logging intensity and high-intensity silviculture; and, unlogged controls. The silvicultural treatments applied to FCTs involved liberation from lianas and overtopping trees. Results showed that rates of FCT stem diameter growth increased with light availability, logging intensity, and intensity of silvicultural treatments, and decrease with liana infestation degree. Growth rate increment was larger in the light and intensive silvicultural treatment (22–27%). Long-lived pioneer species showed the strongest response to intensive silviculture (50% increase) followed by total shade-tolerant species (24%) and partial shade-tolerant species (10%). While reduced-impact logging is often not sufficient to guarantee the sustainability of timber yields, application of silvicultural treatments that substantially enhanced the growth rates of FCTs will help move the management of these forests closer to the goal of sustained yield.     

Influence of redox conditions and rice straw incorporation on nitrogen availability in fertilized paddy soils

Biology and Fertility of Soils - Temporal nitrogen (N) availability in fertilized rice paddies is the result of a balance of processes, mainly the gross rates of N mineralization, microbial and...     

Comparative regeneration ecology of three leguminous timber species in a Bolivian tropical dry forest

A comparative study of the regeneration ecology ofthree lesser-known leguminous timber species wasconducted in the seasonally dry forests of SantaCruz, Bolivia to determine species regenerationstrategies and make silvicultural recommendationsfor these species. The study included arepresentative from each subfamily of Leguminosae:Anadenanthera colubrina (Vell. Conc.) Benth.(Mimosaceae), Copaifera chodatiana Kunth.(Caesalpinaceae), and Centrolobium microchaeteC. Martius (Fabaceae). After production in themid-late dry season, seeds of all species sufferedhigh (>30%) rates of predation. For seedssurviving predation, Anadenanthera germinatedwithin three days after the first rains and a highgermination capacity (82%), but most seedlings diedfrom inadequate light or during subsequent periodsof drought. Copaifera germinated more slowlybut had high germination capacity (85%). Centrolobium had very low germination capacity(4%) and germinative energy. Most successfulregeneration of Centrolobium occurred viasprouting from damaged roots on or near loggingroads where it had a density of 261 root sprouts/ha.Anadenanthera regenerated best from seedin areas with soil disturbance or burning. Theregeneration of these species will likely increaseunder more intensive logging and/or post-harvestcompetition control treatments in logging gaps. Themore shade-tolerant Copaifera is most suitedto the current regime of light selective logging,but all three species are likely to be responsive topost-harvest competition control treatments. Impacts of controlled and natural fire were mixed,but generally seedling regeneration and growth wereeither not significantly affected or were increasedby fire.     

Linking Ni and Cr concentrations to soil mineralogy: does it help to assess metal contamination when the natural background is high?

Purpose

In soils from serpentinitic areas the natural background of Ni and Cr is so high that the assessment of contamination by comparing metal concentrations with some fixed thresholds may give unreliable results. We therefore sought a quantitative relation between serpentines and Ni and Cr concentrations in uncontaminated soils, evaluated if the approach may help in establishing a baseline, and discussed if additional anthropogenic inputs of Ni and Cr can be realistically individuated in these areas.

Materials and methods

We analysed the total, acid-extractable and exchangeable concentrations of Ni and the total and acid-extractable concentrations of Cr in 66 soil horizons, belonging to 19 poorly developed and uncontaminated Alpine soils. The soils had different amounts of serpentines, depending on the abundance of these minerals in the parent material. We calculated an index of abundance of serpentines in the clay fraction by XRD and related total metal contents to the mineralogical index. We then tested the regressions on potentially contaminated soils, developed on the alluvial plain of the same watershed.

Results and discussion

We found extremely high total concentrations of Ni (up to 1,887 mg kg^–1) and Cr (up to 2,218 mg kg^–1) in the uncontaminated soils, but only a small proportion was extractable. Total Ni and Cr contents were significantly related to serpentine abundance (r ²?=?0.86 and 0.74, respectively). The regressions indicated that even small amounts of serpentines induced metal contents above 200 mg kg^–1, and the 95% confidence limits were 75 and 111 mg kg^–1 of Ni and Cr, respectively. When the regressions were tested on the potentially contaminated soils, a good estimate was obtained for Cr, while the Ni concentration was overestimated, probably because of some leaching of this element.

Conclusions

The concentrations of Ni and Cr that can be expected in soils because of the presence of small amounts of serpentines are comparable to the amounts accumulated in the soil because of diffuse contamination and potentially contaminated soils had metal concentrations falling in the range expected from the presence of natural sources. Only in the case of very severe contamination events, the identification of anthropogenic sources adding to the natural background would be feasible.     

Humus forms,organic matter stocks and carbon fractions in forest soils of northwestern Italy

Humus forms may be the first tool to assess qualitatively organic matter turnover in soils; as such they should be related to the stocks of organic C a soil can store, to the characteristics of organic matter that affect its stability and, more generally, to the factors of soil formation. In this work, we tested these hypotheses in 27 forest soils of northwestern Italy. Site variables representing the pedogenic factors allowed classifying the plots into three clusters, which were significantly different for soil and humus types. The average stocks of organic C in the humic episolum (organic and top mineral horizons) ranged from 2.7 kg m⁻² in Eumulls to 9.5 kg m⁻² in Amphimulls. A clear trend in C stocks was visible and related both to the increasing presence of organic layers where the environmental conditions do not favour a rapid turnover of organic matter and to the good mixing of organics and minerals in “bio-macrostructured” A horizons. The characteristics of organic matter were also linked to humus forms: The proportion of humified complex substances was the highest in the most active forms, and conversely, non-humified extracted substances formed a considerable part of organic matter only where the environmental conditions limit organic matter degradation. Humus forms seem therefore to reflect several mechanisms of organic matter stabilisation and are clearly related to the capacity of the soil to store C.     

Seed morphological characteristics,storage behavior,and germination pattern of Combretum indicum (L.) DeFilipps

Genetic Resources and Crop Evolution - Combretum indicum (L.) DeFilipps seeds have anthelmintic properties and are recognized to be medicinal; however, the array of their morphological characters,...     

Soil Properties Required by Some Southern Africa Fruit Trees as Assessed by Discriminant Analysis

Some indigenous fruit trees, in the drylands of southern Africa are worthy of interest because of their adaptation to environmental conditions prohibitive for traditional crops. Their fruits or their derivatives are traditionally used as an additional income by rural population, but little information is available about the properties of the soils that support their growth, although this information is necessary if the trees are subjected to sustainable domestication. Several soil properties are, however, to be considered as a whole and discriminant analysis provides a helpful tool to individuate the best conditions for the tree growth. Thirty-five soil samples were taken in areas where the trees naturally grow and produce, and the analytical data of the surface layer were used to relate soil properties to tree species. Four groups of trees were well separated using two discriminant functions that takes into account both the fertility characteristics (pH, organic C, N, texture, and properties of the exchange complex) and the Fe contents and distribution among the oxide forms. The discriminant functions allow a very acceptable reclassification of the data (more than 80% of cases correctly reclassified) and the classification coefficients were used to build an empirical equation that may help to identify the most suitable tree to be introduced at a new site.     

Contributions of root and stump sprouts to natural regeneration of a logged tropical dry forest in Bolivia

A major impediment to the sustainable management of tropical dry forests in Bolivia is the scarcity of natural regeneration of commercial timber tree species. Where regeneration is present, true seedlings of many species are outnumbered by vegetative sprouts from roots, broken stems, and the stumps of felled trees. This study evaluates the importance of resprouts promoted by logging operations for the regeneration of commercially important canopy tree species. The objectives of the study were: (1) to characterize stump and root sprouting behaviors of canopy tree species harvested for timber; (2) to quantify the effect of logging on relative abundances and growth rates of stump sprouts, root sprouts, and true seedlings; (3) to relate the species-specific probabilities of stump sprouting to stump diameter and stump height; and (4) to explore how sprouting varies with the ecological requirements of canopy tree species. The study was carried out 1–5 years after logging of a privately owned land in a Bolivian tropical dry forest. Twenty-seven of the 31 species monitored resprouted at least occasionally, among which Centrolobium microchaete (Leguminosae-Fabaceae) and Zeyheria tuberculosa (Bignoniaceae) were the most frequent stump sprouters, and Acosmium cardenasii (Leguminosae-Fabaceae) and C. microchaete were the most frequent root sprouters. In all species the number of sprouts declined with increasing stump diameter and stump height. The probability of stump resprouting differed among species but did not vary consistently with stump diameter, except in Z. tuberculosa in which it declined. Approximately 45% of juveniles <2 m tall of canopy tree species originated from root or stem sprouts. Light-demanding species tended to regenerate more from seeds and root sprouts than from stumps. Seedling densities were higher in microsites opened by logging, while root and stem sprouts were equally common across microsites. Given their abundance and the fact that root and stem sprouts at least initially grew faster than true seedlings, we conclude that vegetative regeneration in this tropical dry forest is an important mode of post-logging regeneration especially for species that regenerate poorly from seed. Resprout management should be considered as a potentially effective strategy for the procurement of regeneration following logging, especially for species that do not readily recruit from seed.     

Beyond reduced-impact logging: Silvicultural treatments to increase growth rates of tropical trees

Use of reduced-impact logging (RIL) techniques has repeatedly been shown to reduce damage caused by logging. Unfortunately, these techniques do not necessarily ameliorate the low growth rates of many commercial species or otherwise assure recovery of the initial volume harvested during the next cutting cycle. In this study, we analyze the effect of logging and application of additional silvicultural treatments (liana cutting and girdling of competing trees) on the growth rates on trees in general and on of future crop trees (FCTs) of 24 commercial timber species. The study was carried out in a moist tropical forest in Bolivia, where we monitored twelve 27-ha plots for 4 years. Plots received one of four treatments in which logging intensity and silvicultural treatments were varied: control (no logging); normal (reduced-impact) logging; normal logging and low-intensity silviculture; and, increased logging intensity and high-intensity silviculture. Tree growth rates increased with intensity of logging and silvicultural treatments. The growth rates of FCTs of commercial species were 50–60% higher in plots that received silvicultural treatments than in the normal logging and control plots. Responses to silvicultural treatments varied among functional groups. The largest increase in growth rates was observed in FCTs belonging to the partially shade-tolerant and the shade-tolerant groups. These results indicate that silvicultural treatments, in addition to the use of RIL techniques, are more likely to result in a higher percentage of timber volume being recovered after the first cutting cycle than RIL alone.     

Micropore characteristics of organic matter pools in cemented and non‐cemented podzolic horizons

In Podzols, organic matter (OM) is stabilized mainly by interaction with minerals, as a direct consequence of pedogenic processes. Metal–organic associations strongly affect OM surface features, particularly microporosity. Cemented ortstein horizons (CM) may form during podzolization, accompanied by a spatial arrangement of OM on mineral surfaces, which differs from that in non‐cemented horizons (N‐CM). To investigate the metal–organic associations and their changes during pedogenesis, we selected both N‐CM and CM podzolic horizons, isolated NaClO‐resistant OM and compared the specific surface area (SSA) before and after OM oxidation. The SSA was assessed by using N₂, to detect the pores in the range of micropores (< 2 nm) and mesopores (2–50 nm), and CO₂, to measure a smaller microporosity (< 0.5 nm), which is not accessible to N₂. Only the N‐CM samples showed the typical increase in N₂‐SSA after the removal of labile OM, while a decrease was found in all CM horizons. The CO₂‐SSA revealed a large number of small micropores characterizing OM, both before and after oxidation. The smallest micropore classes (< 0.5 nm) were, however, more abundant in NaClO‐resistant OM, which had therefore a larger number of N₂‐inaccessible surfaces than the labile pool. The N₂‐SSA data thus indicated a more homogeneous coverage of mineral surfaces by stabilized OM in CM samples. Because of the abundance of small micropores, OM in these podzolic B horizons had extremely large CO₂‐SSA values (about 800 m² g^?1), with sharp differences between the NaClO‐labile OM (290–380 m² g^?1) and the NaClO‐stabilized pool (1380–1860 m² g^?1), thus indicating very reactive illuvial organic materials.