水流冲击多段滞留气团的三维数值模拟

针对水气两相瞬变现象,充分考虑了水体弹性、气体可压缩性、水-气交界面的动态运动以及多段气团间相互作用,采用三维CFD方法对起伏管道内含多段滞留气团的水气两相作用进行建模和模拟,选择Standard k-ε湍流模型进行模拟研究,将三维计算结果、现有一维模型计算结果与试验结果进行对比分析,并通过水气两相分布图展现动态变化过程.结果表明:与一维模型相比,三维CFD模型能够更为准确地模拟起伏管道内瞬变压力波动,并且能够清楚描述水气掺混、耦合的动态变化.水流冲击初始两段滞留气团压力波动曲线显示,多气团间的瞬变压力并非同步变化,可能呈现多气团峰值压力交替出现的情况,这与初始气团长度密切相关.水气交界面自由变化,阻断水体长度时刻发生变化,当水体运动到管道弯曲处时会产生新的阻断水体,将气团分成若干部分.     

基于准静态同轴探头模型的土壤复介电测量方法

末端开路同轴探头法测量土壤复介电值用于表征土壤含水率具有准确、快捷的优点。针对目前土壤介电同轴探头集总测量模型没有充分考虑探头的参数以及土壤体积对测量结果影响等问题，基于电磁场理论，对末端开路同轴探头建立了准静态数学模型，适用于土壤的复介电常数准确测量。通过全波软件仿真和模型计算结果对比，以无水乙醇介电实测值和理论值对比，验证模型的准确性。采用本文介电测量模型对不同含水率的黄绵土进行测量计算，复介电常数实部与实测土壤含水率二阶多项式拟合决定系数大于0.965，表明本文所提土壤介电测量方法适用于土壤复介电常数和含水率的测量。     

Hybrid breeding for biomass yield in winter triticale: II. Combining ability and hybrid prediction

Accurate hybrid prediction and knowledge about the relative contribution of general (GCA) and specific combining ability (SCA) are of utmost importance for efficient hybrid breeding. We therefore evaluated 91 triticale single-cross hybrids in field trials at seven environments for plant height, heading time, fresh biomass, dry matter content and dry biomass. Fresh and dry biomass showed the highest proportion (23%) of variance due to SCA. Prediction accuracies based on GCA were slightly higher than based on mid-parent values. Utilizing parental kinship information yielded the highest prediction accuracies when both parental lines have been tested in other hybrid combinations, but still moderate-to-low prediction accuracies for two untested parents. Thus, hybrid prediction for biomass traits in triticale is currently promising based on mid-parent values as emphasized by our simulation study, but can be expected to shift to GCA-based prediction with an increasing importance of GCA due to selection in hybrid breeding. Moreover, the performance of potential hybrids between newly developed lines can be predicted with moderate accuracy using genomic relationship information.     

Effects of Large Saddle Panels on the Biomechanics of the Equine Back During Rising Trot: Preliminary Results

The saddle panels, directly in contact with the horse's back, are likely an important element to optimize the fitting of the saddle, the comfort of the horse, and subsequently, the pain management in dorsalgic horses. The aim of this study was to better understand the effect of the saddle panels on the horse's back, by evaluating a prototype saddle (comfort panels: CP) compared to a standard saddle (STD). The horse's back movements were measured using inertial measurement units (IMUs) fixed at the levels of thoracic vertebrae T6, T12, T16 (under the saddle) and lumbar vertebrae L2 and L5. The centers of mass (COMs) of the horse and the rider and limb's protraction-retraction angles, pressure between saddle and horse's back, and force on the stirrups were measured using respectively 2D motion capture, pressure mat and force sensors in the stirrup leather. Three horses were trotted at the rising trot (sitting: left diagonal-rider seated; standing: right diagonal-rider standing) by the same rider. To compare saddles, linear mixed-effects regression models were used. The estimated means (SE) were calculated. During sitting phase, pressure in the cranial and middle areas of the saddle significantly increased for CP compared to STD (+0.9 (0.2) kPa and +1.0 (0.1) kPa, respectively) whereas caudal pressure decreased (−1.8 (0.4) kPa). Concurrently, the range of motion of angles T12-T16 and T16-L2 under the saddle significantly increased (+1.8 (0.2)° and +2.3 (0.3)°, respectively). The results showed that modifications of the panels' shape not only affect the pressure distribution but also the kinematics of the thoracic and lumbar regions of the equine back.     

Engineered-airlift pumps for aquaculture applications using multiphase flow analysis

Currently, very few aquaculture operations are employing airlift pump technology for water recirculation, aeration, and waste removal. This is likely due to the poor design and lower efficiency of traditional airlift design, the limited amount of research effort that has been invested in improving performance capabilities of air lift pumps and the general lack of awareness of the industry about the inherent advantages of airlift systems. A new efficient airlift pump is hydrodynamically designed by incorporating the Volume of Fluid (VOF) multi-phase model along with the K-ε turbulence model utilizing Computational Fluid Dynamics (CFD) tools. The pump is designed to offer a substantial reduction in total energy usage as well as an improved quality of the culture products in order to make it attractive to aquaculture industry. In this study, both numerical and experimental investigations were carried out for airlift systems operating under two different submergence ratios of 50% and 90% in a lab setting using 2.54 cm diameter pumps. Also, the performance of a large-scale pumps of 10.16 cm diameters were also tested in an aquaculture raceway to determine its effect on the operation. The numerical results were found to be in agreement with the experiments within ±20% which is considered very reasonable for multiphase flow analysis. The present study was found to present a great tool for modelling the airlift pump performance, and potentially proposing new designs.     

含刚性沉水植物明渠水流结构的试验研究

【目的】得到含刚性沉水植物明渠的水流结构。【方法】采用粒子图像测速仪(PIV),用有机玻璃棒模拟刚性植物,在不同来水流量、植物密度条件下对明渠水流结构进行了试验研究。【结果】无植物时平均流速沿垂向呈对数分布规律,有植物时则呈现明显的分区分布特性。无植物时紊动强度值沿垂向变化不大,有植物时在植物顶端位置处紊动最剧烈。流量或植物密度越大,植物顶端位置的流速梯度就越大,植物层上方的流速最大值也越大。植物密度越大,植物顶端位置的紊动强度越大,植物密度对水流紊动强度由最大值减小到最小值的区域影响很大。【结论】刚性沉水植物的存在会改变水流结构,增强紊动掺混,增强流体质点交换和能量传递,且上述影响会随着流量或植物密度的增大而增强。     

不适温度条件诱导西瓜嗜酸菌进入VBNC状态的研究

 由西瓜嗜酸菌(Acidovorax citrulli)引起的瓜类果斑病,是危害西瓜和甜瓜等葫芦科作物的一种典型的种传细菌性病害。已有文章报道西瓜嗜酸菌在铜离子诱导下可进入“有活力但不可培养”(viable but non-culturable,VBNC)状态,并在适当条件下复苏,成为生产中潜在的病害初侵染来源。本文结合实际生产中的种子温汤浸种和低温储藏等条件,分别设定了50℃、55℃高温和4℃低温对西瓜嗜酸菌AAC00-1进行处理,通过流式细胞术(flow cytometry,FCM)和平板培养法分别检测菌体活性和可培养性。结果显示,不适宜的温度条件能够诱导西瓜嗜酸菌AAC00-1进入VBNC状态,其中55℃高温20和30 min的两个处理,所有活菌均进入VBNC状态。将处理后的AAC00-1接种西瓜子叶,接种植株未表现出果斑病症状,且不能从接种部位分离得到可培养菌体。表明本诱导条件下的VBNC状态A. citrulli菌体不能通过短时间活体接种复苏。本研究分析了西瓜嗜酸菌在不适宜温度条件下进入VBNC状态的能力,为解析病害可能的初侵染来源提供了理论依据,对葫芦科作物果斑病防控具有重要的生产实践意义。     

黄土丘陵区坡面薄层水流动力学特性及其对土壤侵蚀的影响

为奠定基于运动力学参数构建土壤侵蚀模型的理论基础,通过不同降雨强度(25、50和75 mm/h)、不同坡长(1、5、10、15和20 m)下径流小区内人工模拟降雨试验,对不同处理下坡面薄层水动力学特性进行分析,并对水动力学参数与土壤侵蚀之间的关系进行初步探讨。结果表明:当坡度一定时,坡面平均流速主要受坡长及单宽流量影响,降雨强度通过影响单宽流量的大小间接影响坡面平均流速;在试验设计范围内,当坡长1 m时,整体上呈"层流-急流态",当坡长为1 m时,整体上呈"层流-缓流态";当降雨强度一定时,雷诺数随着坡长的增加线性增加,佛汝德数随着坡长的增加以幂函数形式增加;降雨强度对坡面流有明显的"增阻"效应;坡面阻力系数随着坡长的增加呈幂函数减小趋势;坡面平均土壤侵蚀率与单宽流量间呈一元线性趋势增加,与水流平均流速间呈指数函数增加,与雷诺数间呈二次函数增加。     

群钻钻削精度试验

通过群钻钻头直径Ｄ，进给量ｆ和切削速度ｎ对孔径扩张量，圆度，孔中心线垂直度和直线度影响的试验，得出它们的变化规律。