汽车变速器齿轮修形仿真分析

汽车变速器的关键部件齿轮因其加工和装配质量的影响,工作时容易引起振动噪声大及承载能力降低等问题,而齿轮修形是解决这些问题的有效方法,且成本较低。针对某款汽车变速器,利用Romax对齿轮进行修形分析。结果表明,修形后减小了齿轮的传动误差和最大接触应力,齿面载荷分布更加合理。有效改善了齿轮的传动性能,增加了齿轮寿命。     

Sectioned pelvic fin ray ageing of muskellunge Esox masquinongy from a Virginia river: comparisons among readers, with cleithrum estimates, and with tag–recapture growth data

Abstract  The potential utility of pelvic fin rays as ageing structures was evaluated for southern US muskellunge Esox masquinongy Mitchill populations by comparing age estimates among three readers and against cleithrum estimates, and by comparing observed length changes of tagged fish with changes predicted from growth equations based on pelvic fin ray age estimates. Mean coefficient of variation in age estimates among all readers and between the two readers with prior ageing experience was 17.8% and 5.6%, respectively. Exact and within 1-year agreement rates between pelvic fin rays and cleithra were 76% and 100%, respectively. Mean (± 2 SE) estimated absolute error between observed and predicted length changes for 13 tagged muskellunge was 30 ± 14 mm. This evaluation indicated that pelvic fin rays may prove to be a useful, non-lethal method for ageing muskellunge in southern US waters. Validation studies are still needed to ensure that growth rings form consistently throughout fish's life span.     

非平行直纹面的电解磨削

为解决整体叶轮扭曲叶片型面的精加工难题,本文进行了五轴联动数控展成电解磨削的基础研究.在分析平行直纹展成电解磨削整体叶轮扭曲叶片的过切误差、得到过切误差计算公式的基础上,提出用圆锥磨轮和组合式五轴联动数控方案来消除过切误差的方法.文中还介绍了数控展成电解磨床的结构与运动、经济型多轴数控系统及其联动控制方法,并建立了电解磨削非平行直纹展成曲面的数学模型,开发了五轴联动数控展成电解磨削自动数控编程系统,对航空发动机整体叶轮的叶片型面进行电解磨削.结果表明,加工效率比手工修磨、抛光提高了12倍以上.     

森林资源二类续档误差及原因分析

针对当前森林资源数据二类续档存在的问题,在对永安市大坑采育场大坑工区进行小班实地调查的基础上,以2003年初二类调查小班主要调查因子数据与1996年二类调查续档至2002年底数据进行对比,分析其误差及产生原因,并提出相关建议。     

An investigation of uncertainty in field habitat mapping and the implications for detecting land cover change

Land cover data for landscape ecological studies are frequently obtained by field survey. In the United Kingdom, temporally separated field surveys have been used to identify the locations and magnitudes of recent changes in land cover. However, such map data contain errors which may seriously hinder the identification of land cover change and the extent and locations of rare landscape features. This paper investigates the extent of the differences between two sets of maps derived from field surveys within the Northumberland National Park in 1991 and 1992. The method used in each survey was the Phase 1 approach of the Nature Conservancy Council of Great Britain. Differences between maps were greatest for the land cover types with the smallest areas. Overall spatial correspondence between maps was found to be only 44.4%. A maximum of 14.4% of the total area surveyed was found to have undergone genuine land cover change. The remaining discrepancies, equivalent to 41.2% of the total survey area, were attributed primarily to differences of land cover interpretation between surveyors (classification error). Differences in boundary locations (positional error) were also noted, but were found to be a relatively minor source of error. The implications for the detection of land cover change and habitat mapping are discussed.     

基于PCA-SVR-ARMA的狮头鹅养殖禽舍气温组合预测模型

为提高狮头鹅养殖禽舍气温预测精度,提出了基于主成分分析(Principal Component Analysis,PCA)、支持向量回归机(Support Vector Regression,SVR)融合自回归滑动平均(Autoregressive Moving Average,ARMA)模型的狮头鹅养殖禽舍气温组合预测模型。在建模过程中,运用主成分分析法筛选狮头鹅养殖禽舍气温的关键影响因子,消除变量之间冗余信息,约简预测模型结构;采用SVR-ARMA构建狮头鹅禽养殖舍气温组合预测模型,先通过SVR对气温进行预测,再由基于ARMA模型的残差预测值修正气温预测结果。利用该模型对广东省汕尾市2018年7月21日至2018年7月30日期间的狮头鹅养殖禽舍气温进行预测。结果表明,该组合预测模型取得了良好的预测性能,与标准BP神经网络、标准SVR、PCA-BPNN(反向传播神经网络,BackPropagationNeuralNetwork)、PCA-SVR和PCA-BPNN-ARMA等模型对比分析,其评价指标平均绝对误差、均方根误差和平均绝对百分比误差分别为0.183 2℃、0.454 0℃和0.005 9,均表明所提出的组合模型具有更高的预测效果,不仅能够满足狮头鹅养殖禽舍气温实际精准调控的需要,还为狮头鹅健康养殖和种苗繁育环境精细化管理提供决策。     

基于DTW距离的拖拉机传动轴载荷样本长度计算方法

针对工程领域载荷样本长度确定方法对农业机械载荷适用性较差的问题,提出了一种基于动态时间扭曲(DTW,Dynamic Time Warping)距离计算载荷样本长度的方法。首先,运用无线扭矩传感器获取犁耕作业下拖拉机传动轴的动态载荷,结合传动轴犁耕作业下的载荷特点,划分作业工况;再将作业循环叠加并经过归一化处理后进行DTW距离计算,确定传动轴载荷样本长度;最后,计算参数外推中均值混合正态分布函数的拟合参数相对误差。结果表明,运用DTW距离方法确定的载荷样本长度,能够使均值双正态分布函数拟合得到的参数相对误差保证在10%以内。近似均值精度估计法和均值曲线拟合法的拟合参数相对误差最大值分别为126.06%和80.62%,而基于DTW距离计算方法的拟合参数相对误差最大值为5.43%,验证了基于DTW距离的载荷样本长度计算方法的适用性。研究结果可为拖拉机传动轴田间试验载荷样本长度确定提供参考。     

基于合成法的定位误差的分析与计算

为保证机床夹具设计的可靠性,定位误差的计算是机床夹具设计过程中必不可少的重要环节之一。为此从定位误差的产生机理出发,介绍了定位误差的概念、产生原因,并给出计算公式,有助于快速实现定位误差的求解。     

Soil aggregate formation and stability induced by starch and cellulose

Soil aggregate (SA) can be formed and stabilized when soil organic matter (SOM) is decomposed in the soil. However, the relationships between the SA dynamics and SOM with different decomposition rates have not been clarified. Therefore, this study examined the effects of the addition of polysaccharides to soil on SA formation and stability. A Japanese tropical soil was incubated for 99 d at 30 °C in a dark environment following the addition of 0.5% (w/w) starch or cellulose. The decomposition rates of the amendments, and SA formation and stability were evaluated by measuring soil respiration rates, and distribution fractions of soil aggregate sizes and mean weight diameter (MWD) of SA, respectively. The cumulative soil respirations with all treatments rapidly increased until Day 12 of the incubation. The initial slope of the cumulative soil respiration in the soil with starch was significantly higher than that in the soil with cellulose. In either soil with starch or cellulose, the fractions of macro-aggregates (>1000 μm in diameter) significantly increased, respectively, compared with control soil. However, the fractions of meso-aggregates (250–1000 μm) and nano-aggregate (<20 μm) in the soil with starch significantly decreased, while those fractions in the soil with cellulose fluctuated until Day 6. The MWDs reached the maximum on Day 6, indicating the SA formation in the soils with starch or cellulose. The increasing rate of the SA formation in the starch-amended soil was greatly higher than that in the cellulose-amended soil. After Day 6, the MWDs in the soils with either polysaccharide decreased with similar trends with no significant differences between treatments, indicating similar stability of the SA in both treatments. This study showed that the different decomposability of the organic amendments might influence the SA formation differently, but not the SA stability.