Research on a Novel Inverter of VSC

In order to improve waveform performance of light HVDC system, a lot of switches which operate in high frequency are used, which causes large switching losses and results high cost. A new Buck type voltage source converter(BVSC) is proposed. The new BVSC comprises a dual-buck converter and a three-phase inverter operating in grid frequency. Only two high frequency switches are used, which results good output waveform performance. In order to reduce the high frequency switching losses, a novel improved double-frequency Buck type voltage source converter(DBVSC) is also proposed. An additional dual-Buck converter is added to the BVSC, the added dual-Buck converter deals with the fundamental power that operates in low frequency, and BVSC only deals with harmonic power that operates in high frequency. The output waveform is enhanced and the switching losses are reduced in DBVSC, and the power rating is also increased. The DBVSC is very suitable for large power rating application. The one cycle control theory is adopted to control the proposed DBVSC with analog circuit, which is very simple. The proposed DBVSC and control method are verified by simulation.     

A Research of Life Cycle Integrated Management Pattern of Construction Project

Development Management (DM) in decision phase, Project Management on behalf of the owner (OPM) in implementation phase and Facility Management (FM) in operation phase are three isolated management tools during traditional life cycle management of construction project. As a result, a lot of potential disadvantages are aroused. In recent years, many research organizations try to reform the traditional method using different integration means. This paper tries to explore into integration of DM, OPM and FM to overcome the malpractice of traditional life cycle management of construction project. The research focuses on three aspects: 1.putting forward the concept of Life Cycle Integrated Management (LCIM), based on management integration theory; 2. Raising a new idea to owner's (operator's) management organization design, which emphasizes on the balance of life cycle objectives; 3. Analyzing an information module, level and method of system integration of Life Cycle Integrated Management Information System.     

光电控制穴盘精密播种装置的研究

根据水稻工厂化育秧农艺的要求，设计了穴盘精密播种装置，该装置以PIC16C57为核心，采用光电一体化技术来控制电磁振动排种器，使其每次只排出一粒种子，提高了播种精度，降低了漏播率。试验表明，该播种装置的单粒率达98%以上，重播率小于2%，漏播率为零。     

机械设备等间距大修费的季节周期预测法

根据机械设备等间距大修的特点。研究提出适用于该类机械设备维修费预测的新方法，即季节周期预测法。示例计算表明，运用此法对等间距大修维修费进行预测，具有较高的精度。     

基于工况偏差在线计算的PHEV能量补偿控制方法

针对车辆真实工况与标准工况实时偏差导致的整车能量管理性能下降问题,提出一种基于工况偏差在线计算的插电式混合动力汽车(PHEV)能量补偿控制方法。根据车辆工况识别结果建立实际工况与标准工况之间偏差的数学表达式;以油电耗比为指标函数,构建能量管理系统控制偏差数学模型,给出工况偏差与控制偏差函数关系的离线建模方法;在此基础上,以工况偏差为输入,以控制偏差为被控对象,设计能量补偿模糊控制器,给出控制偏差的模糊控制规则和动力补偿分配权值。基于某控制策略对本文所提出的方法进行仿真验证,结果表明:所提出的能量分配补偿控制方法能够进一步降低整车燃油消耗,进而提升PHEV能量管理性能。     

锅炉循环水泵机械密封设计探讨

通过IR型热水循环泵轴封结构的更新设计实践，阐述了在水温150℃下机械密封的正确设计方法和组合式密封结构专利技术的优点。实践表明，该组合式密封结构作为锅炉热水循环泵的轴封使用是可行的，可以推广应用。     

一个山区农场生态农业系统的分析与评价

供试农场生态农业系统由加工业，牲猪，沼气池，桔园，鱼池和农田６个系统组成。本文运用“黑箱理论”和方法，对６个子系统的投入能量，产出能量，能量效益及投能结构进行了分析。全系统的能量产投科为０．８１，光能利用率为１．５５％，产品能与总投能之比为３７．８％，单位产值含能量为１８８．３ＧＪ／万元，系统投入的有机能占总投能的９５％。从系统的Ｎ素循环和动态平衡分析表明：农田，桔园的Ｎ素输入均大于输出，Ｎ素处于     

四川短尾鼩不同体重个体分布及种群繁殖力变化

对贵州省大方县1996 ～2012年采集的134只四川短尾鼩体重进行统计分析,结果表明:四川短尾鼩体重最低为12.20 g,最高达48.00 g,平均体重为(31.12±6.48)g,其雌、雄个体体重分布均呈常态分布,个体体重主要分布在22.1 ～40.0 g之间,占总兽类数的85.07％,是活动能力较强的个体.四川短尾鼩达到性成熟的体重界线为22.0 g,怀孕个体最低体重为26.00 g,睾丸下降个体最低体重为23.80 g,随着个体的增长,体重的增加,种群繁殖力不断增强,体重达30.0 g以上时,种群繁殖力迅速增加,平均怀孕率、睾丸下降率和繁殖指数分别为43.75％、80.95％和1.53,说明体重达30.0 g以上个体大部分已达到性成熟,是参与繁殖的主要个体.