黄土高原人工灌草系统不同立地条件土壤种子库特征

本研究通过野外调查取样与室内试验相结合，连续两年对黄土高原人工灌草系统不同坡向、坡位进行取样，以期对该区土壤种子库的物种组成、密度特征及其物种多样性进行初步了解。研究结果表明：该人工灌草生态系统土壤种子库共有9科，15种，其组成因坡位、坡向以及年份而异；坡向、坡位均显著影响土壤种子库物种多样性指数、丰富度指数与土壤种子库密度（P<0.05），土壤种子库密度为3 218～5 492粒·m^-2，总体呈现为阴坡显著高于阳坡（P<0.05），下坡位显著高于上坡位（P<0.05）；坡位和坡向均对物种均匀性系数无显著影响；年份对土壤种子库无显著影响。上述研究可为黄土高原人工灌草系统的可持续利用与恢复提供参考依据。     

微藻水热液化有机相最佳回收工艺研究

以微拟球藻为原料,研究微藻水热液化过程中多种参数对水热液化后有机物回收率的影响,包括温度、时间、溶剂比和pH等,从而获得微藻水热液化后有机物的最佳回收工艺条件。结果显示,在室温下进行有机相回收,保证回收溶剂比为20∶1(溶剂/水相不溶物;v/wt)、停留时间为10min、回收pH7,即可达到最佳回收效果。最佳条件下水热液化有机相的回收率为34%左右,且不同的回收温度和pH值对回收的有机相组分均会产生影响。     

立地条件和林分结构对有林地生产力的影响

通过分析有林地生产力与立地条件和林分结构中各因子的关系,探索制约有林地生产力的主要因素.结果表明:不同立地质量中Ⅰ类地单位蓄积量最高(268.86±20.24 m3/hm2),不同坡向中东坡单位蓄积量最高(269.78±38.54 m3/hm2),不同树种组成中10杉类型单位蓄积量最高(259.33±14.62 m3/hm2);有林地生产力与林分年龄、林分密度正相关,相关系数R分别为0.590、0.460;有林地生产力与海拔、坡度相关性不显著.以上结果说明立地质量、坡向和树种组成对有林地生产力影响显著;有林地生产力与林分年龄、林分密度相关,与海拔、坡度无关.     

栽培措施对萝卜生长特性及产量的影响

研究不同栽培措施对萝卜生产的影响,结果表明:试验条件下,播种太早或太迟,对萝卜生长都不利,"瑞雪"萝卜最适播种期应为9月25日至11月5日;利用地膜覆盖,萝卜地上部和地下部的生产速度明显提高,生育期提早,产量比露地提高了36.64%;每667m2种植密度以6 500~7 500株为好。     

成渝地区葡萄园营养状况初步研究与分析

在成渝地区具有代表性的葡萄园内进行了叶样和土样采集分析,结果表明:与标准值对比,大部分葡萄园内叶片中营养元素P与Mg含量水平较低,微量元素Mn与Fe含量水平则偏高；在大量使用有机肥的葡萄园内,土壤中速效性的营养元素N、P、K含量水平相对较高.     

试验条件对标准橡胶塑性初值和保持率的影响与分析

通过测试不同厚度的试样和改变相同厚度试样的老化时间及温度来验证和分析试样厚度对塑性初值（P0）、老化条件对塑性保持率（PRI）的影响。试验表明,在其它试验条件不变的情况下,试样厚度偏大塑性初值（P0）也相应偏大,老化时间越长和老化温度越高,老化后的P30和塑性保持率（PRI）就越小。     

秸杆栽培食用菌拮抗菌株的鉴定及混菌发酵条件的优化

从海洋泥样和食用菌发酵料中分离出了32个菌株,从中筛选出了既具有较高的纤维素酶活性又具有对青霉(Penicillium spp)、木霉(Trichoderma spp.)、根霉(Rhizopus)、曲霉(Aspergillus spp)、毛霉(Mucro)较强拮抗能力的W-4、W-10、N-14三个菌株。经鉴定W-4、W-10分别属于放线菌中黄色节杆菌(Arthrobacter flavescens)和石灰壤诺卡氏菌(Nocardia calcarea),N-14属于细菌中的乳酸乳杆菌(Lactobacillus lactis)。通过正交试验对上述3个菌株混合发酵条件进行优化,确定在温度35℃、时间36h、pH7.5、装液量60ml/250ml时为最适发酵条件。在此条件下3个菌株混合发酵液纤维素酶活力仍然很高。同时混合发酵液对青霉、曲霉、毛霉、木霉、根霉的拮抗能力分别为单菌株发酵液的1.79倍、1.36倍、1.29倍、1.04倍、1.07倍。     

Optimality Conditions for Nonsmooth Extremum Problems in Topological Vector Spaces

Some new concepts of coneD_s convexity,coneD-s quasiconvexity,cone D-s pseudoconvexity,s right derivative of vector value mapping are proposed;and their related properties are discussed;the optimality necessary conditions and sufficient conditions for constrained extremum problem(VP)involving in cone D-s convex mapping are extablished;the relation between local optimal solution and global optimal solution;as well as the relation between weakly efficient solution and efficient solution for (VP) are derived;the corresponding results generalize the related results of classic convex programming.     

Experimental Study on the Deformation Characteristics of Fine-Sandstone Under the Loading and Unloading Conditions

The deformation characteristics of the fine-sandstone is studied under the loading and unloading conditions at the three different deformation-rates and the two different stress-levels. The experimental results show that there is really the plastic-loop in the deformation curve for the loading deformation curve is different from the unloading deformation curve. But the plastic-loop is nearly unchangeable since the second circulate loading. The residual-deformation is be almost zero since the second circulate loading, and that the slope of the deformation curve increases as the deformation-rate increases, and that the residual-deformation increases as the stress-levels increases.     

The Feasible Control for the Day-operation of the Three-Gorge Cascade Hydropower Station

The feasible control problem is presented for the day-operation of the Three-Gorge Caseade Hydropower Station. The significance of the problem is explained. Basic propetties ofthe problem and the approaches to study it are discussed. Two methfods are given for solving theproblem. which are calculus of variation and linear programming. In the former. the Euler equationwith time-lag and the generalised two-point boundary conditions are obtained and the correspondingpractical implication is interpreted. In the latter. the rationality for the discrete model is exptainedand the computalional details are given for the implement software. some questions which should bepaid much attentfon and the corresponding propeels are prasented based on the numerical results andtheoretical analysis