The effect of compression and incision on wood veneer and plywood physical and mechanical properties

ABSTRACT

Drying takes the largest share of energy in plywood production, and varying moisture content of veneers necessitates re-drying that often leads to over-dry veneers with deactivated surfaces, which may promote imperfect bonding. In order to decrease the drying time, reduce the need for re-drying of veneers, and improve the quality of plywood, birch and spruce veneers were subjected to pre-treatment by cold compression, incision, or a combination of the two. The effects of pre-treatment on the veneer and plywood quality were assessed by standard tests. Compression had a beneficial effect on water removal of the wettest veneers (spruce sapwood (SW) and birch), but some thickness reduction was observed in the veneers as well as the finished birch plywood. Compression led to thickness reduction of spruce veneers, but had no effect on SW plywood thickness likely due to higher viscoelasticity. Both compression and the combination of incising and compression levelled the moisture variation within the compressed stacks. Incision improved the modulus of elasticity of birch plywood, shear strength of SW plywood, and both bending and shear strengths of heartwood plywood. Higher surface pressure decreased the drying time of spruce SW in both plain compression and combined incision and compression pre-treatment.     

南方铁杉与长苞铁杉物理力学性质研究

本文对产于福建省武夷山市的南方铁杉和连城县的长苞铁杉进行了较系统的材性试验研究,提供了必要的该铁杉属木材的物理力学性质指标。     

提高减速箱中橡胶油封-金属转轴密封性能的方法

减速箱橡胶油封漏油是一个尚未解决的一个棘手问题 .从摩擦学的角度分析 ,漏油的原因主要是油封与转轴接触部位不符合摩擦学的要求 ,造成此处的摩擦系数过高 ,油封磨损过快 .介绍了几种降低橡胶油封与转轴之间摩擦系数的方法     

退化人工梭梭林的恢复技术研究

对退化人工梭梭林进行恢复试验研究发现:滴灌可使梭梭林地土壤含水率显著提高;梭梭光合作用增强;群落物种数增多,盖度增大;防风固沙作用增强.布设机械沙障可使退化梭梭林地表粗糙度增大,林内近地面层风速、输沙量显著下降.春灌3 a后,不仅退化梭梭个体恢复正常生长,同时梭梭林群落物种组成数明显增加,盖度显著增大,生态功能也逐渐恢复.雨水集流和雨水下渗改造两种模式应用1～2 a后,退化梭梭林地土壤含水率均有明显提高.滴灌、布设机械沙障、春灌和改造结皮4种技术措施对退化梭梭林生长及其环境均有明显的恢复作用,其中滴灌、机械沙障恢复技术是当前和今后推广的主要措施;春灌和改造结皮可作为前两种技术的补充措施.     

木材纤维与回收聚丙烯的热压复合工艺研究

研究了热压时间、热压温度、聚丙烯和偶联剂加入量等工艺因子对木材纤维和回收聚丙烯复合材料性能的影响。确定了压制密度为0．80g／cm3、10mm厚的木塑复合材料的最佳工艺条件为:热压温度175℃、热压时间8min、塑料加入量40％、偶联剂的加入量4％。在此条件下压制的木塑复合板材,物理力学性能中的内结合强度和吸水厚度膨胀率与中密度板的国家标准相比达到优等水平,静曲强度和弹性模量基本满足中密度板的国家标准要求。     

粤北低山丘陵地区小红栲木材物理力学性质初步研究

对粤北山区速生树种小红栲木材的物理力学性质进行了测试，并据此分析了该木材的加工利用价值，提出了开发利用的途径     

13种杨树木材物理力学性质的研究

采集1－69杨等10种黑杨的9年生试材，易县毛白杨等3种白杨的13年生试材，测试木材物理力学性能，分析心边材，不同树高位置，株间的变化规律，比较品种间木材性质的差异，试验结果表明，13种杨树全树木材心材率在14．6－34．1％，之间，生材含水率在86．2－148．5％之间，由生材干燥至含水率为12％所产生的干缩率在8．66％－11．96％这间，气干密度属低类或很低类，强度属弱类，硬度属软类或甚软类，冲击韧性中等；黑杨心材颜色深，心边材性质差异大，白杨心材颜色淡，心边材性质差异小，品种间木材物理力学性质差异较大，按其主要特点可将13个品种的木材分为4类。     

竹筋陈材与新伐材主要物理力学性质的比较研究

以３５年前的毛竹为研究对象，并以经气干的同龄、同径的新伐毛竹材作为对照，根据国际规定及相关试验方法，对两类试材在完全相同的实验条件下进行物理性质、力学性能、化学成份等的测定和对比分析，结果表明，影响竹材使用寿命的主要因素是水分的侵蚀和虫害，载荷作用的时间长短及性质对它的影响轻微，因此，在加工、保管和使用竹材的过程中要十分重视防水、防潮和防虫，保持竹材尺寸稳定，达到提高耐久性的目的。     

机械加工工艺方案的多级模糊综合评价

应用多级模糊评价方法对机械加工工艺方案进行评优.采用层次分析法,创建评价指标体系,确定各项指标的权重.建立了定量指标模糊隶属度的数学表达式.通过计算综合评价值,从而确定出最优方案.     

Hygrothermal effect of bamboo by dynamic mechanical analysis

Dynamic properties of bamboo, Phyllostachys pubescens, with moisture content (MC) ranging from −130 to 130°C, were studied by dynamic mechanical analysis (DMA). The results showed that the hygrothermal effect on dynamic mechanical properties was negative. The storage modulus decreases with increasing temperature and MC, and glass transition temperature decreases with increasing MC. The glass transition temperature and tan delta of bamboo were 30.5°C, 0.02 and 10.61°C, 0.04, when MC was 10% and 34%, respectively. __________ Translated from Journal of Nanjing Forestry University (Natural Sciences Edition), 2006, 30(1): 65–68 [译自: 南京林业大学学报(自然科学版), 2006, 30(1): 65–68]