防霉中密度纤维板的研制

在湿度较大的地区和潮湿的场所,中密度纤维板(下称中纤板)因长期受潮而产生霉变,使其性能受损,更为严重的是污染了居住环境。因此,研究如何防止中纤板霉变,使其具有防霉性能应作为一项重要的课题。笔者通过对防霉剂选择、优化热压工艺参数、防霉效果测试等方面进行了试验研究,确定了适当的防霉剂及其添加量,得出了压制防霉中纤板的优化热压工艺。     

Effects of five additive materials on mechanical and dimensional properties of wood cement-bonded boards

There is a growing desire to improve the properties and use of nonwood plant materials as supplements to wood materials for wood cement-bonded boards (WCBs). This study was conducted to determine the comparative properties of WCBs containing various amounts of discontinuous inorganic fiber materials, such as alkali-resistant glass fiber, normal glass fiber, mineral wool, and nonwood plant materials such as retted flax straw and wheat straw particles. Tested cement-bonded boards were made at wood/additive compositions of 100/0, 90/10, 80/20, 70/30, 60/40, and 50/50 (weight percentages). Seventy-eight laboratory-scale WCBs were produced. Various board properties, such as the modulus of rupture (MOR), internal bonding strength (IB), water absorption (WA), thickness swelling (TS), and linear expansion (LE), were studied. The test results showed that three types of discontinuous inorganic fiber used as reinforcing materials in composites significantly enhanced and modified the performance of WCBs. The mechanical properties and dimensional stability of cement-bonded board were significantly improved with increasing amounts of the additives. MOR and IB were increased; and WA, TS, and LE of boards were reduced by combination with the inorganic fiber materials. The results also indicated that combination with retted flax straw particles only slightly increased the MOR of boards, and wheat straw particles led to marked decreases in all the mechanical properties and the dimensional stability of WCBs.Part of this report was presented at the 50th Annual Meeting of the Japan Wood Research Society, Kyoto, April 2000     

Effect of maleic anhydride grafted styrene-ethylene-butylene-styrene （MA-SEBS） on impact fracture behavior of polypropylene / wood fiber composites

MA-SEBS as compatibilizer and impact modifier was incorporated into Polypropylene/Wood Fiber （PP/WF） to enhance interface adhesion and impact strength of the composite. The effect of MA-SEBS content on the impact fracture behavior of PP/WF composites was studied. The impact properties of composites with 8% MA-SEBS reached the maximum value. And further increasing of MA-SEBS content to 10% did not improve the fracture toughness, but improved the stiffness of composites by DMA analysis. This was attributed to the improved PP/WF adhesion. As the MA-SEBS content is more than 8%, the molecule interaction of PP and WF was expected to much stronger than lower MA-SEBS. Scanning electron microscopy （SEM） was performed to analyze the impact fracture surface and showed a stronger affinity for the wood surfaces.     

竹纤维--一种纺织新材料

竹纤维是一种新型的绿色环保纤维,它具有良好的服用性能,是一种有着广泛应用前景的纺织纤维,该文介绍了竹纤维的种类、结构特点以及竹纤维织物的一些特性.     

Characterization of the morphological,physical, and mechanical properties of seven nonwood plant fiber bundles

The morphological, physical, and mechanical properties of the nonwood plant fiber bundles of ramie, pineapple, sansevieria, kenaf, abaca, sisal, and coconut fiber bundles were investigated. All fibers except those of coconut fiber had noncircular cross-sectional shapes. The crosssectional area of the fiber bundles was evaluated by an improved method using scanning electron microscope images. The coefficient factor defined as the ratio of the cross-sectional area determined by diameter measurement, to the cross-sectional area determined by image analysis was between 0.92 and 0.96 for all fibers. This indicated that the area determined by diameter measurement was available. The densities of the fiber bundles decreased with increasing diameters. The diameters of each fiber species had small variation of around 3.4%-9.8% within a specimen. The tensile strength and Young’s modulus of ramie, pineapple, and sansevieria fiber bundles showed excellent values in comparison with the other fibers. The tensile strength and Young’s modulus showed a decreasing trend with increasing diameter of fiber bundles.     

西南桦人工林木材纤维形态株内变异研究

为研究西南桦人工林的木材物理力学性能,对其禾材纤维形态进行了测试.结果表明:径向上纤维长度、纤维宽度、纤维长宽比在髓心处较小,沿髓心向外逐渐增大并渐趋稳定,纤维壁腔比在髓心处较大,沿髓心向外逐渐减小并渐趋稳定;轴向上纤维长度、宽度、长宽比在树根处较小,随树木长高逐渐增大并逐步趋于稳定,纤维壁腔比在树根处较大,随树木长高逐渐减小并逐步趋于稳定.西南桦人工林木材纤维较长,纤维长宽比较大,纤维壁腔比较小,纤维形态表明西南桦人工林木材是适合用于制浆造纸工业的极好原料.     

一水肌酸对杜浙猪肉质性状、肌肉磷酸原代谢、纤维类型特征及蛋白质溶解度的影响

本文旨在研究饲粮添加一水肌酸(CMH)对杜浙猪肉质性状、肌肉磷酸原代谢、纤维类型特征及蛋白质溶解性的影响。试验选取体重70 kg左右杜浙猪30头,随机分为2组,每组5个重复,每个重复3头猪。对照组饲喂基础饲粮,试验组饲喂基础饲粮+0.5%CMH,试验期30 d。结果显示:与对照组相比,饲粮添加CMH对杜浙猪生长性能无显著影响(P0.05),使背最长肌宰后24 h p H和剪切力显著增加(P0.05),滴水损失和压榨损失显著降低(P0.05),背最长肌的肌酸(Cr)总量、磷酸肌酸(PCr)储备量、肌酸激酶(CK)活性、白蛋白及肌原纤维蛋白溶解度显著增加(P0.05),背最长肌肌球蛋白重链(My HC)Ⅱa mRNA比例显著降低(P0.05)。结果提示,饲粮添加CMH对杜浙猪肉质性状具有调控作用,对肌肉磷酸原代谢能力、蛋白质溶解度及肉品系水力产生显著影响。     

Zinc supplementation strategies in feedlot heifers receiving an extended-release implant or an aggressive re-implant program

Two hundred eight Angus-crossbred heifers (291 ± 23 kg) from four sources were used in a randomized complete block design. The objective of the study was to determine the effects of implant strategy and Zn supplementation on performance, carcass characteristics, muscle fiber diameter, and mineral status of heifers. Heifers were assigned to a 2 × 2 factorial study for 168 d, and factors included Zn and implant (IMP). Heifers were supplemented Zn (mg/kg dry matter [DM]; ZnSO₄) at national (30; NRC) or industry (100; IND) recommendations. Implant strategies (Merck Animal Health, Madison, NJ) included extended-release Revalor-XH on day 0 (REV-XH; 20 mg estradiol + 200 mg trenbolone acetate) containing four uncoated pellets and six coated pellets or the uncoated implant Revalor-200 on day 0 and again on day 91 (REV-200; 20 mg estradiol + 200 mg trenbolone acetate). Heifers were blocked by weight within source to pens of five or six heifers per pen (nine pens per treatment). A corn silage-based diet was fed during the growing period (days 0–55) followed by transition to a corn-based finishing diet. Weights were taken consecutively on days −1/0, 55/56, and 167/168. Liver and muscle from the longissimus thoracis were collected from one heifer per pen on days −5, 14, 105, and 164. Data were analyzed via Mixed Procedure of SAS. Average daily gain (ADG) and liver mineral used Period as the repeated effect. Corresponding to periods of high hormone payout from each implant, days 0–28 and 91–120 ADG were greatest for REV-200, whereas REV-XH numerically peaked during days 56–91 (IMP × Period; P = 0.02). Day 91 IND body weight tended to be heavier (P = 0.06) and day 120 body weight was heavier (P = 0.05) than NRC heifers. No effect of Zn or IMP on final body weight was observed (P ≥ 0.21). Muscle fiber cross-sectional diameter on day 164 was greater (P = 0.05) in IND than NRC. Liver Mn concentrations decreased by day 14 regardless of implant, though days 105 and 164 concentrations were lesser for REV-200 than REV-XH (IMP × Period; P = 0.02). No effects of Zn, IMP, or the interaction were observed for carcass-adjusted gain to feed, days 0–168 DM intake, hot carcass weight, or ribeye area (P ≥ 0.11). The nominal differences in performance between implant strategies suggest that extended-release implants may be an effective implant strategy to replace re-implant programs in heifers, whereas the improved performance of heifers fed IND vs. NRC during times of peak hormone payout suggests a role for Zn in periods of rapid growth.     

利用基因芯片分析比较Giza75和SG747纤维发育差异表达基因

【目的】 利用适应性广、产量高的陆地棉和纤维品质优异的海岛棉进行高通量基因芯片比较分析,筛选和鉴定棉纤维发育相关的关键基因。【方法】 以SG747(Gossypium hirsutum L.)和Giza75(Gossypium barbadense L.)为材料,利用Affymetrix公司的棉花寡聚核苷酸基因芯片对其开花后10 d(10 days after anthesis, 10 DPA)的棉纤维进行表达谱分析。【结果】 材料Giza75和SG747共筛选到3 905个差异表达基因,其中功能预测基因占比17.80%,翻译、核糖体结构相关基因占比16.82%,翻译后修饰占比14.32%。Gra.2198.1.A1_at正向调控棉纤维发育过程,Gra.85.1.S1_at、Ghi.249.1.A1_at和Ghi.8448.1.S1_x_at负向调控棉纤维发育过程,可能参与了棉纤维发育过程。【结论】 利用陆地棉和海岛棉基因芯片并结合qRT-PCR筛选和鉴定到4个纤维发育相关的关键候选基因。