果蔬型甜玉米新品种京科甜191的选育

京科甜191是以超甜玉米自交系T68为母本,自交系T6302为父本,通过杂交选育而成的果蔬型甜玉米品种。果穗筒型,穗长19.0 cm,穗粗5.3 cm,穗行数16~18行,行粒数36~38粒,粒行整齐。籽粒亮黄色,外观漂亮。平均每667 m2鲜果穗产量900 kg左右,出籽率约67.4%。鲜籽粒含粗蛋白2.98%,粗脂肪1.37%,总糖6.7%,口感甜脆清爽,皮薄无渣。播种至采收平均85.4 d(天),适宜京津冀及类似生态区种植。     

Compatibility of root growth and tuber production of potato cultivars with dynamic and static water‐saving irrigation managements

The important root characteristics of root length density (RLD) and root mass density (RMD) generally differ among irrigation managements and potato cultivars. The objective of this study was to investigate the RLD and RMD variations and their functional relationships with gross potato tuber yield for two commercial potato cultivars, Agria and Sante, under different irrigation strategies. Full irrigation and water‐saving irrigation strategies, deficit and partial root drying irrigations, were applied statically (S) and dynamically (D) based on daily crop evapotranspiration. Results showed that SPRD had significantly greater RLD (3.64 cm/cm³) and RMD (132.7 μg/cm³) than other irrigation treatments. Between the potato cultivars, Agria had significantly larger values of RLD (3.50 cm/cm³) and RMD (138.7 μg/cm³) than Sante. The functional relationship between the root growth characteristics and tuber yield showed that under water‐saving irrigations, Agria increased root mass at the expense of gross tuber yield but Sante increased root mass to maintain larger gross tuber yields. However, Agria produced more roots and gross tuber yield than Sante, and it is concluded that Agria is a more drought‐tolerant potato cultivar, which is recommended for tuber production in regions where water might be scarce. It was shown that larger root production in potatoes was associated with improved tolerance to water stress.     

不同处理方式对蒸谷米复水性的影响

以稻谷为原料,对蒸谷米的复水性进行了研究。通过单因素试验,探讨超高压浸泡工序、蒸煮工序、干燥工序中相关参数的影响规律,并以蒸煮时柠檬酸添加量、蒸煮次数、微波干燥时间为变量,成品复水率为指标,通过响应面分析建立回归方程,得出蒸煮次数对复水性影响最大,柠檬酸添加量次之,干燥时间影响最小。利用模型确定了较佳参数为柠檬酸添加量1.1%,微波干燥时间6.4 min,蒸煮次数3次。     

全球植物科学领域发展态势分析

基于农业科技创新的发展需求,为农业科技资源的有效配置提供支撑,从文献计量角度对全球植物科学领域研究现状及态势进行分析。利用定性、定量相结合的方法构建检索策略,基于Web of Science数据库及文献计量分析工具,对文献发表量、文献主要贡献国家、机构、期刊及发文量较高的作者H指数进行统计分析。结果表明,1995—2018年植物科学领域的文章发表量整体上呈现稳定增长趋势,学科呈现蓬勃发展的整体势头。美国和中国是文献主要贡献国家,文献量和总被引频次显著高于其他国家,但美国及欧洲国家的篇均被引数量高于中国。从全球来看,中国科研机构在发文数量占有绝对优势,而德国马克思普朗克的文章篇均被引数量高,达到10以上。对2016—2018年的高被引文献(Top10)进行内容分析,并通过高频词共现主题聚类可视化分析。从论文影响力及主题词规模2个维度表征领域内研究方向。结果表明,“植物应对生物及非生物胁迫”、“基因编辑技术”、“基因组学分析”、“植物生殖发育调控”是近年来植物科学的高关注度研究方向,主题内容与前期的需求调研相符,初步预测这些研究方向将对农业创新发展起到重要推动作用。     

氮磷钾用量对小麦冠层不同层次光截获和干物质分配的影响

为明确不同氮、磷、钾用量对小麦冠层不同层次光截获和干物质分配的影响，以济麦22为供试材料，设置F0（不施肥）、F1（N 180 kg·hm^-2，P₂O₅ 75 kg·hm^-2，K₂O 60 kg·hm^-2）、F2（N 225 kg·hm^-2，P₂O₅ 120 kg·hm^-2，K₂O 105 kg·hm^-2）和F3（N 270 kg·hm^-2，P₂O₅ 165 kg·hm^-2，K₂O 105 kg·hm^-2）4个施肥量处理，比较分析开花后不同氮、磷、钾用量对小麦叶面积指数、冠层不同层次光截获特性和成熟期干物质分配的影响。结果表明，F1处理下叶面积指数显著高于F0处理，而与F2和F3处理间无显著差异；开花后15 d，F1处理下小麦冠层不同层次及总PAR截获率和截获量均显著高于F0处理，而与F2和F3处理间无显著差异。F1处理下成熟期干物质在小麦冠层不同层次营养器官中的分配量、籽粒中的分配量及总干物质积累量显著高于F0处理，而与F2和F3处理间无显著差异。成熟期干物质在小麦冠层不同层次营养器官和籽粒中的分配量以及总干物质积累量与冠层上层（顶部至株高2/3）、中层（株高2/3至株高1/3）和总PAR截获率均呈显著正相关。F1处理（N 180 kg·hm^-2，P₂O₅ 75 kg·hm^-2，K₂O 60 kg·hm^-2）为本试验条件下的最优处理。     

不同基因型燕麦苗期耐盐碱性分析 及其鉴定指标的筛选

为探讨不同基因型燕麦苗期的耐盐碱性，筛选适宜松嫩平原种植的燕麦品种，本研究采用Hoagland营养液水培法，以250 mmol·L^-1高浓度NaHCO₃胁迫模拟松嫩平原盐碱环境，对49份来自国内外不同地区的主栽燕麦品种进行研究。试验测定了250 mmol·L^-1 NaHCO₃胁迫下燕麦的株高（X₁）、根长（X₂）、地上部鲜重（X₃）、地下部鲜重（X₄）、地上部干重（X₅）、地下部干重（X₆）、地上部含水量（X₇）、地下部含水量（X₈）、根冠比（X₉）9个指标，以各单项指标的耐盐碱系数(SATC) 作为衡量耐盐碱性的依据，利用多元分析方法对不同燕麦品种耐盐碱能力进行了综合评价。结果表明：通过对各指标的耐盐碱系数进行主成分分析，得到X₄、X₇、X₈ 3个综合指标，涵盖了全部数据86.155%的信息量；通过隶属函数分析和聚类分析将49份燕麦品种分为3类，其中草莜1号、张燕7、T7等3个品种为耐盐碱品种，HLJ 1、白燕2号等41个品种为中度耐盐碱品种，三分三、坝莜13号等5个品种为盐碱敏感品种。     

矾根主要品种的叶色表型性状分析

通过目测进行分类的方式很难准确界定矾根品种叶色。为建立一套更为科学的基于叶色表型的矾根品种分类体系,笔者利用色差仪对72个矾根品种共计432个样品的叶色进行测定,对获得的L、a、b 3个色度值进行聚类分析,将72个矾根品种分为褐色系、深绿色系、黄色系、灰绿色系、浅绿色系5类色系。对矾根品种各色系的L、a、b值进行相关性分析,发现叶片正面的L值与a值、a值与b值呈负相关,L值与b值呈正相关,但相关性不明显;叶片背面的L值与a值、a值与b值呈负相关,L值与b值呈显著正相关。从多重比较的结果中可以看出,矾根品种各色系之间的L、a、b色度值差异显著,尤其是各色系间叶正面的颜色差异较大,在矾根品种选育工作中,叶片正面的颜色将作为主要参考。     

陕西周至县猕猴桃的运输损坏研究

通过分析陕西猕猴桃自身的生理特性,并结合陕西周至县猕猴桃的包装形式及运输环境,找出猕猴桃运输损坏的原因,提出猕猴桃合理的运输方案,为快递企业生鲜水果的运输方式提供一定的理论参考。     

心尖锚的力学分析

设计了一种六齿镍钛合金锚钩用于封堵器等二尖瓣、三尖瓣返流修复系统的心尖固定,并对其力学特性进行研究.通过分析心脏结构及解剖数据,确定锚钩形状和可控尺寸设计变量,利用Solidworks建立锚钩3D模型,运用Abaqus软件对23个不同尺寸锚钩模型的入鞘过程进行有限元计算,分析锚钩入鞘过程中的最大入鞘力、最大冯米塞斯应变和入鞘轨迹的影响因素.制作了一种规格锚钩实物,与计算结果进行对比分析.结果表明:鞘部长度、鞘部角度及齿宽对应力、应变的影响最大,可以通过减小鞘部长度、鞘部角度及齿宽,有效降低最大应力、应变值;厚度、曲率半径及齿宽对入鞘力起到决定性作用,而根长和角度对入鞘力的影响很小;轴向刺入深度主要通过控制鞘部长度及鞘部角度来定义,径向刺入深度则由曲率半径的大小所决定.研究可为需心尖固定的心脏介入产品设计提供一定的借鉴意义.     

The economic benefits and costs of trees in urban forest stewardship: A systematic review

Understanding the benefits provided by urban trees is important to justify investment and improve stewardship. Many studies have attempted to quantify the benefits of trees in monetary terms, though fewer have quantified the associated costs of planting and maintaining them. This systematic review examines the methods used to jointly analyse the costs and benefits of trees in the urban landscape, assesses the relative balance of benefits and costs, and attempts to understand the wide variation in economic values assigned in different studies. The benefits most frequently studied are those related to environmental regulation and property values, and the available data show that these usually outweigh the costs. Aesthetic, amenity, and shading benefits have also been shown to provide significant economic benefits, while benefits in terms of water regulation, carbon reduction and air quality are usually more modest. Variation in benefits and costs among studies is attributed largely to differences in the species composition and age structure of urban tree populations, though methodological differences also play a role. Comparison between studies is made difficult owing to differences in spatiotemporal scope, and in the way urban forest composition and demographic structure were reported. The overwhelming majority of studies concern deciduous trees in Northern America, and much less is known about urban forests in other regions, especially in the tropics. Future work should thus seek to fill these knowledge gaps, and standardise research protocols across cities. In light of ambitious goals in many cities to increase tree cover, ongoing advances in valuation methods need to provide a more comprehensive accounting of benefits and costs, and to better integrate economic assessment into the decision-making process.