Information extraction and dynamic evaluation of soil salinization with a remote sensing method in a typical county on the Huang-Huai-Hai Plain of China

Monitoring the dynamics of soil salinization is of great importance for agricultural production. This study selected Yucheng County, a typical county on the Huang-Huai-Hai Plain (HHHP) of China, as the study area and evaluated the spatial and temporal variation of soil salinization. Three methods, consisting of principal component analysis (PCA) transformation, tasseled cap (TC) transformation, and optimal band combination (OBC), were used to extract information from an early Landsat multispectral scanner (MSS) image from 1984, and their advantages were compared. In addition, OBC was used on a thematic mapper (TM) image from 2009. An iteratively self-organizing data analysis algorithm was used together with prior knowledge of likely classifications to interpret the MSS and TM images for data classification. Finally, a transfer matrix method was used to assess the spatial and temporal variability of soil salinization and analyze the driving factors of soil salinization. Compared to PCA transformation and OBC, TC transformation was a more effective method for extracting soil salinization information from the MSS sensor. The results indicate that a soil area of approximately 298 km² was affected by salinity in 1984 in Yucheng County, of which 5.40%, 11.96%, and 12.75% were classified as being subject to slight, moderate, and severe salinization, respectively. In 2009, the saline area was reduced to only 146 km², of which 10.70% and 3.75% were characterized by slight to moderate salinization and no severe salinization, respectively. The saline land decreased at an average rate of 6 km² per year. This decrease was probably a result of lower groundwater depth, increased organic fertilizer or crop straw in soil, changed land use type, and increased vegetation coverage.     

有机无机肥配施对冬春烤烟经济性状的影响

在云南梁河县对冬春烤烟开展有机肥和化肥合理配施试验,结果比对照增产62.7%;中上等烟比例增加3.6个百分点;净增产值提高72%。     

液态有机肥对滴灌棉花光合特性及产量形成规律的影响

为优化滴灌棉花的施肥技术,探究液态有机肥对滴灌棉花生长发育的影响,笔者采取单因子随机区组试验设计,研究在滴灌棉花不同生育时期施用液态有机肥对棉花光和特性、干物质积累及产量的影响。结果表明:(1)施用液态有机肥能够促进植株生长发育,增大光合速率增加棉花产量,且随着液态有机肥施用量的增大,各处理叶面积指数、SPAD值均呈现先增后减的趋势,均于铃期达最大值,其中苗期与蕾期施液态肥的C处理最大值分别为3.25和62.63;(2)叶片净光合速率(Pn)、蒸腾速率(Tr)、气孔导度(Gs)均以C处理最高,并于8月5日花铃期达到极值,而胞间二氧化碳浓度(Ci)表现为C处理最低,为188.67μmol/mol;(3)整个生育期内单株干物质积累量、伏前桃、伏桃、单株铃数及品质均以C处理最好,与其他处理达显著差异水平(P0.05),且增产幅度为27.01%~42.97%。研究表明,液态有机肥适宜的施用时期不仅可提高叶面积指数、叶绿素含量及光合速率,同时为后期干物质积累及产量的形成奠定基础。     

施肥与耕作技术集成对土壤理化、生物性状及木薯产量的影响

为了探讨施肥及耕作技术集成对木薯地土壤理化、生物性状及木薯产量的影响，本试验共设置5个处理，分别是生物有机肥＋测土配方肥＋盖膜集雨水＋深耕(处理1)、生物有机肥＋测土配方肥＋盖膜集雨水(处理2)、生物有机肥＋测土配方肥＋深耕(处理3)、生物有机肥＋测土配方肥(处理4)、施通用高浓度复合肥(处理5常规施肥及种植方式作为对照)，通过大田试验研究他们对木薯地土壤理化、生物性状及木薯产量的影响。结果表明：与常规施肥及种植方式相比，不同施肥及耕作栽培技术集成处理均可提高木薯地土壤养分含量和含水量，改善土壤理化性状和土壤微生物区系组成。处理1的木薯产量增幅达到35.81%，差异极显著。本试验条件下，木薯最优的施肥及耕作栽培模式是技术综合集成生物有机肥＋测土配方肥＋盖膜集雨水＋深耕(处理1)。     

河西荒漠灌区紫花苜蓿施肥效应及其基于数据包络分析法的经济效益研究

为科学准确地评判河西走廊苜蓿主产区紫花苜蓿饲草生产中施肥措施对其产品质量及生产收益的影响,本研究以“甘农3号”紫花苜蓿为材料,通过2016、2017年2年田间试验,以该区域紫花苜蓿饲草生产的平衡施肥推荐方案(N 103.5 kg·hm^-2、P₂O₅ 105 kg·hm^-2、K₂O 90 kg·hm^-2)为对照,探讨了不施肥及3种不完全施肥(缺氮偏施、缺磷偏施、缺钾偏施)处理下紫花苜蓿的生产性能,并采用数据包络分析法(DEA)对其经济效益进行分析。结果表明:与不施肥相比,施肥措施各处理均显著提高紫花苜蓿产量、蛋白总量,降低其酸性洗涤纤维和中性洗涤纤维,提高了相对饲用价值,从而改善了紫花苜蓿品质,并有效增加了经济效益;与氮、磷、钾平衡施肥相比,各偏肥处理的紫花苜蓿产量和品质均显著低于平衡施肥,尤以缺磷偏施的降幅最大,2016、2017年2年的产量和蛋白总量降幅分别达到25.9%、25.7%和33.4%、33.1%。因此,磷是河西荒漠灌区紫花苜蓿饲草生产的养分限制因子,氮、磷、钾对该地区紫花苜蓿生产性能影响顺序为:磷>氮>钾。运用数据包络分析法(DEA)分析出河西荒漠灌区紫花苜蓿的施肥效应为氮、磷、钾平衡施肥的经济效益最优,为DEA有效;不完全施肥的3个评价单元及不施肥评价单元为DEA无效,其中,不施肥经济效益最低,3个不完全施肥评价单元中的缺磷偏肥的紫花苜蓿经济效益比缺氮偏肥和缺钾偏肥更低;另外还以DEA模型推算出不同施肥措施下紫花苜蓿饲草生产经济效益改进的具体方案,其中,不施肥的紫花苜蓿饲草生产需调整的幅度最大,调整额度达10678.88 CNY·hm^-2,各施肥措施需调整的幅度排序为:不施肥>缺磷偏施>缺氮偏施>缺钾偏施。     

Influences of sand cover on erosion processes of loess slopes based on rainfall simulation experiments

Aeolian-fluvial interplay erosion regions are subject to intense soil erosion and are of particular concern in loess areas of northwestern China.Understanding the composition,distribution,and transport processes of eroded sediments in these regions is of considerable scientific significance for controlling soil erosion.In this study,based on laboratory rainfall simulation experiments,we analyzed rainfall-induced erosion processes on sand-covered loess slopes(SS)with different sand cover patterns(including length and thickness)and uncovered loess slopes(LS)to investigate the influences of sand cover on erosion processes of loess slopes in case regions of aeolian-fluvial erosion.The grain-size curves of eroded sediments were fitted using the Weibull function.Compositions of eroded sediments under different sand cover patterns and rainfall intensities were analyzed to explore sediment transport modes of SS.The influences of sand cover amount and pattern on erosion processes of loess slopes were also discussed.The results show that sand cover on loess slopes influences the proportion of loess erosion and that the compositions of eroded sediments vary between SS and LS.Sand cover on loess slopes transforms silt erosion into sand erosion by reducing splash erosion and changing the rainfall-induced erosion processes.The percentage of eroded sand from SS in the early stage of runoff and sediment generation is always higher than that in the late stage.Sand cover on loess slopes aggravates loess erosion,not only by adding sand as additional eroded sediments but also by increasing the amount of eroded loess,compared with the loess slopes without sand cover.The influence of sand cover pattern on runoff yield and the amount of eroded sediments is larger than that of sand cover amount.Furthermore,given the same sand cover pattern,a thicker sand cover could increase sand erosion while a thinner sand cover could aggravate loess erosion.This difference explains the existence of intense erosion on slopes that are thinly covered with sand in regions where aeolian erosion and fluvial erosion interact.     

自动施肥系统开发与性能测试

目的 开发一种适应于以固态水溶肥为原料的自动施肥系统,测试分析自动施肥系统性能。方法 主控机采用ARM9电路控制模块可实现对轮灌编组、预搅拌时长、施肥开始与结束时间、施肥持续时长、施肥量等参数的设置;选择以蠕动泵为注肥装置,通过变频器控制注肥泵电机功率的方式控制注肥速率,控制施肥量。对装置核心部件搅拌器额定功率、计量方式、溶肥搅拌参数、排肥速度及固液相比例等主要参数等进行设计与测试。结果 电感脉冲计量方式标准误差最大值1.26%,误差小、性价比好,确定其为本装置采用的计量方式;搅拌器以1.5 Kw额定功率、38 r/min转速搅拌、肥液浓度在1.1~1.3 g/mL、预搅拌时间30 min时,罐内各液位输出肥液浓度值差异不显著(P< 0.05),达到对肥料浓度均匀性的设计要求。结论 将施肥开始前的预搅拌时间设为30 min、搅拌转速设为38 r/min、肥液浓度不高于1.3 g/mL,输出肥液浓度有较好的均匀性,实现精准施肥。     

遵义县白菜不同配方施肥效果初探

为指导农户生产,进行了6个不同施肥量比较试验.结果表明：白菜施肥量为清粪水1500kg/667m2,尿素20kg/667m2,普钙50kg/667m2,氯化钾13kg/667m2,单产高,经济效益好,可在遵义县推广.