Failure criterion for timber beams loaded in bending,compression and shear

Abstract

Based on the elastic–plastic strength calculation, necessary for precise data explanation, a derivation is given of the failure criterion for combined bending, compression and shear. This exact limit state criterion should replace the unacceptable unsafe criteria of Eurocode 5 (EN 1995-1-1:2004). It is shown that the principle used thus far, of limited “flow” in axial compression as a determining failure criterion, for example, predicting no influence of a size effect, does not hold. Instead, it is derived and confirmed by the data that bending tension failure is always determining, showing the existence of a size effect, and correction of the existing calculation method is therefore necessary. Because of the primary importance of the size effect for the strengths, also for combined bending–compression, a simple derivation of the size effect design equations is given and discussed in an appendix.     

森林采伐限额与林业企业生产经营优化的探讨

简述了实施森林采伐限额制度的意义，以及实施限量采伐对林业企业经济的影响。利用投入产出与线性规划最优化模型对林业企业生产经营进行优化设计，提出了解决林业企业民限量采伐矛盾的方法和途径。     

基于粗糙集与支持向量机的禽蛋蛋壳无损检

针对当前禽蛋蛋壳无损检测系统存在检测精度不高的问题,提出粗糙集和支持向量机相结合的方法进行分类器的设计.首先,基于粗糙集理论对特征参数集进行属性约简,在约简过程中,利用模糊C均值聚类算法对特征参数进行量化,并基于属性重要性的启发式搜索对条件属性进行约简;然后,在属性约简的基础上完成支持向量机分类器的训练,在训练过程中,通过交叉验证法对分类器模型参数进行了优化.实验结果表明该方法的分类准确率能够达到94.6%,具有良好的工程应用价值.     

Induced thermotolerance and expression of heat shock protein 70 in sea cucumber <Emphasis Type="Italic">Apostichopus japonicus</Emphasis>

ABSTRACT:   Thermal limits, induced thermotolerance and the expression of heat shock protein 70 (Hsp70) in an echinoderm Apostichopus japonicus were studied. The sublethal and lethal temperatures for the juveniles were 30 and 34°C, respectively; a previous sublethal heat shock exposure (30°C, 2 h) could increase the survival rates of the sea cucumbers when they were exposed to 34°C. This induced thermotolerance could last for at least 2 days. Levels of Hsp70 increased substantially after sublethal heat shock exposure and linearly decreased with time. This result indicated that a close relationship existed between the induction of thermotolerance and the levels of Hsp70 in A. japonicus.     

基于核心主导人物构建团队的拓扑形态分析

以核心主导人物构建团队的方式,运用点集拓扑学中凝聚点的概念,将核心主导人物看作团队的凝聚点,得到核心主导人物集合是团队拓扑空间的闭集,并由此对由3个成员的团队进行分析,得出了同胚意义下的所有拓扑形态。     

Blooming phenology and self-incompatibility of some commercial cherry (Prunus avium L.) cultivars in Iran

Self-sterility in cherry (Prunus avium L.) is one of the most important problems in commercial cherry orchards in Iran and many other countries. The main objective of this research was to determine self-fertility rate and blooming phenology of 25 commercial cherry (P. avium L.) cultivars in Iran. This study was conducted during 2006–2007.Results revealed that the stage of bud swell in all cultivars began late second decade of March, which lasts 8–11 days. In all cultivars the duration end bloom to petal fall stage took 5 days. Cherry cultivars were classified into three groups considering their overlapping pollination. The cultivars each group had a great overlapped pollination toward each other. The results also showed that there was a significant difference among cultivars in respect of the fruit set (P < 1%). The fruit set of open pollination treatment among the cultivars varied in range of 7.36–41.58%. However fruit set was not observed in isolated pollination (artificial and natural self-pollination). In open pollination, the cultivars were also classified into four groups, i.e. weak fertility (Moreau and Ferracida), mean fertility (Siah Mashhad, Napelon, Proteva, Haj usefy, Lambert, Roshun, Sefid Ghermeze Baghno, Arak, Belamarka, Siah Shabestar, Ghermeze Rezaeyeh, Abardeh, Soraty Lavisan and Victoria), good fertility (Peshrase Mashhad, Dovoumras Mashhad, Bing, Shesheiy Mashhad, Siah Ghazvin and Sefid Rezaeyeh), very good fertility (Zarde Daneshkadeh, Dirrase Italia and No. 1 karaj). All cultivars were found to need cross-pollination and included in self-sterile group.     

浅释低温压力容器设计的几项规定

本文仅就碳钢和低合金钢按常规设计的压力容器壳体，设计其低温界限为≤-20℃。     

速生耐寒邓恩桉在桉树分布北缘区的适生性

桉树E uca lyp tus为世界热带、亚热带地区的极有价值的造林树种.对邓恩桉在湘中地区引种后的生长情况进行调查.结果表明:在桉树引种北缘区,邓恩桉年平均高生长为2.3~3.0 m,胸径生长2.2~3.0 cm,表现出一定的抗瘠薄能力、抗寒耐寒性和速生性.扼要地总结了邓恩桉种苗繁殖技术的进展,并就存在的问题提出了解决方法.     

多重集合的运算研究与应用

集合是现代数学中最基本的概念之一,并已深入到各种学科和技术领域中.而作为集合概念扩展的多重集合概念,却少有应用.通过对多重集合进行系统研究,提出了多重集合的包含、相等、多重幂集,以及多重集合补集等相关概念和运算,建立了多重集合完善的理论体系,并给出了多重集合在古典概率中的应用.为进一步研究多重集合在各种学科和技术领域中的应用打下了良好的基础.     

桉树立地生产力与养分生产力参数的确定

桉树试验林样本分析结果表明，桉树树杆中氮，磷，钾养分浓度的倒数与养分吸收量早明显的负线性相关。基于这一相关性，对实测的数据作回归分析。估测的立地生产力极限和养分生产力参数值，以及相应的立地养分效应曲线具有较高的精确度。本文为研究林木生长和营养的动态函数关系提供了新的思路和方法。