Spectrophotometrical characteristics in the near infrared region in beech (<Emphasis Type="Italic">Fagus crenata</Emphasis>) and pine (<Emphasis Type="Italic">Pinus densiflora</Emphasis>) litters at the various decomposing stages

We examined the relationships between the absorptional characteristics in the near infrared region and the chemical changes of decomposing beech (Fagus crenata) and pine (Pinus densiflora) litters. Spectra as well as the concentrations of chemical substances approached each other and converged with decomposition, although both initial characteristics differed markedly between beech and pine. This indicated that the fundamental chemical structures were almost the same, although their organochemical composition differed. Specific absorption bands for lignin, polysaccharide, and protein were identified at 2,140 and 1,670 nm, 2,270, 1,720, 1,590, and 1,216 nm, and 2,350 nm, respectively. Absorbance at 1,670 nm, peculiar band of aromatics, showed a positive correlation with lignin concentration, which suggested the relative increment of aromatics due to condensed lignin in decomposing litters. Absorbance at 2,140 nm, characterized as the C–H bond in HRC = CHR, showed a negative correlation with lignin concentration, which suggested the decrements of some structures such as side-chains in lignin polymers unrelated to aromatics. Absorbance at 2,270, 1,720, and 1,216 nm, specified to O–H/C–O/C–H bonds in saccharide, might reflect the change of polysaccharide during decomposition because they showed a positive correlation to polysaccharide concentration. In the same way, absorbance at 2,350 nm, identified to the C–H/CH₂ bonds in protein, showed a negative correlation to nitrogen concentration in decomposing litters, which might indicate that the C–H/CH₂ bonds in protein decreased with decomposition due to microbial consumption of carbon in protein. Our findings suggested the possibility that the spectral changes indicate the litter digestibility during decomposition and that also explain the compositional change in decomposing litters.     

Delignification of cell walls of <Emphasis Type="Italic">Chamaecyparis obtusa</Emphasis> during alkaline nitrobenzene oxidation

To clarify the behavior of whole lignins in wood cell walls during alkaline nitrobenzene oxidation, the delignification process from cell walls in normal and compression woods of Chamaecyparis obtusa Endl. (Cupressaceae) was observed using ultraviolet and transmission electron microscopies. The lignin content conspicuously decreased to around 10% after 35min in normal wood. The lignin content in compression wood finally leveled off at aroumd 10% after 50min. In gel filtration of oxidation products in ethyl acetate, a high molecular weight fraction was prominent in extracts from the early stage of the reaction. As the oxidation progressed, the high molecular weight fraction became less prominent in both normal and compression wood. Changes in the weights of cell wall residues during reaction indicated that approximately half of the components other than lignin were also removed from the cell walls. This shows that the majority of lignin with relatively high molecular weight is removed from the cell walls together with polysaccharides in the early stage of the reaction and that further oxidative degradation occurs in solution in later stages. Only a small amount of the lignin with low molecular weight could be analyzed by gas chromatography.Parts of this report were presented at the 47th (Kochi, April 1997) and 48th (Shizuoka, April 1998) Annual Meetings of the Japan Wood Research Society, and at the Lignin Symposium, Sapporo, October 1997     

GC-MS and IR spectroscopic analyses of the lignin-derived products from softwood and hardwood treated in supercritical water

Softwood (Cryptomeria japonica) and hardwood (Fagus crenata) were treated in supercritical water (380°C, 100 MPa) for 8 s. The treated woods were fractionated to the water-soluble portion, methanol-soluble portion, and methanol-insoluble residues. For the methanol-soluble portion, which mainly consisted of lignin-derived products, gel permeation chromatography (GPC) and gas chromatographic-mass spectrometric (GC-MS) analyses were conducted to clarify the molecular weight distribution and to identify the monomeric products, respectively. GPC analysis revealed that the methanol-soluble portion contains monomeric and some oligomeric products. GC-MS analysis identified 19 guaiacyl compounds in the methanol-soluble portion from softwood, and 15 syringyl monomeric compounds in the methanol-soluble portion from hardwood. The structures of identified products included not only phenyl propane (C₆—C₃) units but also C₆—C₂ and C₆—C₁ units. In addition, the infrared spectra suggested that the methanol-soluble portion maintains the typical structure of lignin, although it is rich in condensed-type linkages with some changes in the propyl side chain. These results indicate that the supercritical water treatment cleaves not only ether linkages but also part of the propyl chains in lignin to give various aromatic compounds.     

Decomposition behavior of woody biomass in water-added supercritical methanol

The chemical conversion of Japanese beech (Fagus crenata Blume) in water-added supercritical methanol was studied for a wide range of water content using a batch-type reaction vessel to obtain chemicals from lignocellulosics. It was consequently found that addition of water enhanced the decomposition of wood cell wall components; cellulose, hemicelluloses, and lignin. In cases of high water content, however, it resulted in low solubility of lignin-derived products causing an increase in the mass of the residue. The water content was thus optimized to be around 10% (v/v) for the decomposition of wood. Concomitantly, the yields and selectivity of the chemicals from wood could be regulated by the addition of water, especially for the lignin-derived products. As a result, the monomeric compounds of lignin, coniferyl alcohol and sinapyl alcohol, were recovered as their γ-methyl ethers in the presence of water in higher yields than those obtained without addition of water.     

Application of cationic polymer prepared from sulfuric acid lignin as a retention aid for usual rosin sizes to neutral papermaking

Cationic polymers that acted as the retention aids for usual rosin sizes in neutral papermaking were prepared from sulfuric acid lignin (SAL), one type of acid lignin. To convert SAL to the cationic polymer (MP-SAL), SAL was phenolated and then treated by the Mannich reaction to introduce the amino groups. In the MP-SAL single system, MP-SAL exhibited high sizing effectiveness in neutral papermaking with the rosin emulsion size. However, MP-SAL showed no sizing effectiveness when soap rosin size was used. MP-SAL showed increased sizing effectiveness as the pK _a of the introduced amino group increased. From this and comparison of the sizing degrees of MP-SAL and polyethylenimine, which possesses a linear structure, it was suggested that the sizing effectiveness was not only affected by the charge density and molecular weight, but also by the basicity of the introduced amino groups and the molecular structure of the retention aid. In the alum–MP-SAL dual system, alum and MP-SAL synergistically enhanced the sizing effectiveness in the rosin emulsion sizing at neutral pH. In turn, this allowed a decrease in the MP-SAL dosage and resulted in a small decrease in brightness.Part of this report was presented at the 48th Lignin Symposium, October 2003, Fukui     

Litter dynamics of six multipurpose trees in a homegarden in Southern Kerala, India

Multipurpose trees, the integral components of homegardens, contribute significantly to the closed nutrient cycling processes and sustainability of the ecosystem. Although, the litter production and probable nutrient returns via litter in homegardens have been documented, quantification and characterization of the decomposition and bioelement release from the litter have received relatively little scientific attention. The objective of the present study is to explore the litter dynamics of six locally important multipurpose trees (Mangifera indica L., Artocarpus heterophyllus Lamk., Anacardium occidentale L., Ailanthus triphysa Dennst., Artocarpus hirsutus L. and Swietenia macrophylla L.), in an agroforestry homegarden in Southern Kerala, India. Litterfall and nutrient additions in the six species ranged from 383 to 868 g m⁻² yr⁻¹, nitrogen, 6.4 to 8.8, phosphorus, 0.17 to 0.42 and potassium, 1.1 to 2.8 g m⁻² yr⁻¹. The annual litter output in the homegarden was 425 kg with A. hirsutus, M. indica, A. heterophyllus and A. occidentale recording significantly higher litter and nutrient additions. Leaf litter decay studies revealed A. heterophyllus and A. occidentale to be the most labile litter species and S. macrophylla the most recalcitrant. The decay rate coefficients varied significantly among the species. Foliage decomposition rates related to the initial chemical composition of the litter revealed best correlation with lignin. NPK release was almost complete by the end of decay in all species inspite of the initial phases of accumulation observed for nitrogen and phosphorus. Two-way analysis of variance test revealed significant differences in the contents of the three elements as a function of species and time elapsed. Macronutrients were released in the order K>N/P. The higher rates of decay and nutrient turnover in M. indica, A. heterophyllus and A. occidentale foliage indicated the potential of using these species’ litter as nutrient inputs in agriculture while A. triphysa, A. hirsutus and S. macrophylla perform better as organic mulches taking a longer time for decay and hence nutrient release.     

Effects of heat treatment on brittleness of <Emphasis Type="Italic">Styrax tonkinensis</Emphasis> wood

A new approach is proposed for the evaluation of the brittleness of heat-treated Styrax tonkinensis wood. Heat treatment made wood more brittle when wood was heated at a higher temperature or for a longer time. The brittleness increased to four times that of the control when wood was heated at 200°C for 12 h. For treatment at 160°C, the increase in brittleness without any change in weight is thought to be possibly caused by the relocation of lignin molecules. At higher temperatures, loss of amorphous polysaccharides due to degradation is thought to become the main factor affecting brittleness. The crystallites that were newly formed after 2 h of treatment showed brittleness that was different from that of the inherent crystallites remaining after 12 h of heat treatment. This inherent crystalline cellulose possibly plays a role in brittleness. There is also the possibility of using color to predict the brittleness of heat-treated wood.     

Gas chromatographic and mass spectrometric (GC-MS) analysis of lignin-derived products from <Emphasis Type="Italic">Cryptomeria japonica</Emphasis> treated in supercritical water

Sugi (Cryptomeria japonica D. Don) wood was treated with supercritical water (374°C, 22.1MPa), and fractionated into the water-soluble portion, the methanol-soluble portion, and the methanol-insoluble residue. The methanol-soluble portion mainly consisted of the lignin-derived products. To characterize the compounds in the methanol-soluble portion, gel permeation chromatographic (GPC) and gas chromatographic-mass spectrometric (GC-MS) analyses were performed. The GPC analysis indicated that the methanol-soluble portion contained lignin-derived monomeric and dimeric products. GC-MS analysis detected 31 products which were expected to be monomeric compounds, and 18 of these were identified to be guaiacol, methylguaiacol, ethylguaiacol, vinylguaiacol, eugenol, propylguaiacol, vanillin, cis-isoeugenol, homovanillin, trans-isoeugenol, acetoguaiacone, propioguaiacone, guaiacylacetone, 2-methoxy-4-(1-hydroxypropyl)phenol, homovanillic acid, 2-methoxy-4-(prop-1-en-3-one)phenol, coniferyl aldehyde, and ferulic acid. In addition, 22 dimeric products were detected, and 4 of these were believed to be compounds with biphenyl type (5-5), diphenylethane type (-1), stilbene type (-1), and phenylcoumaran type (-5) structures. These results clearly indicated that the methanol-soluble portion included various monomeric and dimeric compounds produced as a result of the cleavage of ether linkages and propyl chains of lignin.     

Structural characteristics of cell walls of kenaf (<Emphasis Type="Italic">Hibiscus cannabinus </Emphasis>L.) and fixation of carbon dioxide

 Kenaf (Hibiscus cannabinus) plants are widely known for their contribution to the global and regional environment because of their ability to fix CO₂. On the other hand, some scientists have doubts about CO₂ fixation by kenaf and have misgivings about the effect of kenaf on the ecosystem. We have characterized the structural characteristics of cell walls of bast fibers, cores, roots, and leaves of kenaf during the maturation of plants and investigated the rate of photosynthesis. During maturation of the kenaf plant the cellulose (bast fiber 52–59%, core 44–46%) and lignin (bast fiber 9.3–13.2%, core 18.3–23.2%) contents increased significantly. The aromatic composition of the lignin of bast fiber was significantly different from that of the core lignin and of other plants. The lignin of bast fiber appears similar to pure syringyl lignin. Fixation of CO₂ by kenaf plants and their contribution to the global environment are discussed. A significatly high rate of photosynthesis of kenaf plants was observed compared to that of woody plants in Japan, but the amount of CO₂ fixation depends on the characteristics of the plantation. If the kenaf was planted in high density, about twice as much CO₂ was fixed as was fixed by trees in a tropical rain forest. Received: April 22, 2002 / Accepted: July 24, 2002 Acknowledgments This project was supported by the Science and Technology Agency (STA) fellowship of the Japan International Science and Technology Exchange Center (JISTEC), which has been successfully applied by Dr. Shuji Hosoya, Forestry and Forest Products Research Institute. We thank Dr. Toshio Sumizono and Mr. Masao Sakurai, Forestry and Forest Products Research Institute, for their kind help in determining the rate of photosynthesis and cultivating the kenaf plants, respectively. We also express our appreciation to Dr. Quang Hung Le, College of Agriculture and Forestry, Ho Chi Minh City, Vietnam for offering information about the cultivation of kenaf at Thu Duc District, Ho Chi Minh City.     

异源表达菊芋HtHCT基因对受体植物木质素相关生理生化指标的影响

羟基肉桂酰辅酶A:莽草酸/奎宁酸羟基肉桂酰转移酶（HCT）是木质素合成过程中的关键酶之一。本研究构建了菊芋HtHCT基因的植物表达载体pCAMBIA1390-HtHCT,分别对拟南芥和本氏烟进行遗传转化,并对转基因植株进行生理生化指标测定。PCR和RT-PCR结果表明,HtHCT基因已经插入到受体植物基因组中,并能进行转录;转基因植株生理生化指标检测表明,HtHCT基因能够调节拟南芥和本氏烟中木质素的含量及组成,并对受体材料的类黄酮合成亦有一定的影响。