硅藻土对5种储粮害虫和不同磷化氢抗性水平杂拟谷盗防治效果的研究

为初步了解硅藻土对储粮害虫的防治效果以及与害虫磷化氢抗性发生发展的关系, 本研究采用直接拌粮法(设置剂量梯度为0?0.2?0.4?0.6 g/kg和 0.8 g/kg)测定硅藻土对赤拟谷盗?杂拟谷盗?锈赤扁谷盗?谷蠹?玉米象的防治效果, 以及磷化氢抗性杂拟谷盗(抗性倍数为 2.3~144.7)对硅藻土的敏感性差异; 除此之外, 本研究还分析了0.4 g/kg硅藻土在 4 种粮食(小麦?玉米?大豆?稻谷)中对赤拟谷盗的杀虫效果?研究结果表明:一定剂量(0.2~0.8 g/kg)的硅藻土均能够在一定时间内有效杀死上述 5种储粮害虫, 不同储粮害虫对硅藻土的敏感性存在显著差异(P<0.05), 其中杂拟谷盗对硅藻土的耐受性最强, 玉米象对硅藻土最为敏感?除个别品系外, 不同磷化氢抗性品系的杂拟谷盗对硅藻土的敏感性不存在显著差异(P>0.05), 且与磷化氢抗性无关; 硅藻土在不同粮食中对害虫的作用效果存在显著性差异(P<0.05)(处理 7 d后, 死亡率为 13%~98%), 其中在大豆中对赤拟谷盗的杀虫效果最强, 在玉米中对其作用效果不明显?因此本研究得出结论:硅藻土对主要储粮害虫均具有一定的防治作用, 且对抗磷化氢的杂拟谷盗具有良好的致死效果?因此, 硅藻土具备成为储粮害虫防治及其磷化氢抗性治理药剂的潜力?     

不同类型水稻品种产量和氮素吸收利用对大气CO2浓度升高响应的差异

目的 探明不同类型水稻品种产量和氮素吸收利用对FACE(大气CO₂浓度增高)响应的差异。方法 以常规粳稻、杂交籼稻、常规籼稻共6个品种为供试材料,研究FACE对不同类型水稻产量、氮素吸收利用的影响。结果 1）FACE处理极显著提高了水稻产量,平均增加24.17%, 常规籼稻增幅最大,FACE和对照均以杂交籼稻最高;2）FACE处理显著增加了单位面积穗数,常规粳稻增幅最大,并显著增加了杂交籼稻和常规籼稻每穗粒数;3）FACE处理显著提高了成熟期吸氮量和氮素籽粒生产效率,成熟期吸氮量平均增加21.23%,杂交籼稻增幅最大, FACE和对照均以常规籼稻最高;氮素籽粒生产效率平均增加7.33%,杂交籼稻增幅最大,FACE和对照均以杂交籼稻最高。成熟期吸氮量对产量促进作用略大于成熟期氮素籽粒生产效率;4）FACE处理降低了植株含氮率,成熟期平均下降0.105个百分点,常规粳稻降幅最大。FACE处理极显著提高植株干物质量,成熟期平均增加23.95%,常规籼稻增幅最大;FACE处理显著提高常规籼稻和杂交籼稻成熟期单穗吸氮量,分别增加10.79%、13.93%,但常规粳稻下降了9.60%;FACE处理显著提高了成熟期群体吸氮强度,平均增加22.29%,杂交籼稻增幅最大。FACE处理对水稻全生育期天数无显著影响;FACE处理显著提高茎鞘、叶片、穗各器官吸氮量,叶片增幅最大,平均增加51.86%,杂交籼稻增幅最大;FACE处理显著提高了不同生育阶段吸氮量,抽穗-成熟阶段增幅最大,平均增加108.90%,杂交籼稻增幅最大;5）植株干物质量、单穗吸氮量、吸氮强度、穗吸氮量、抽穗-成熟阶段吸氮量对成熟期总吸氮量的促进作用分别大于植株含氮率、单位面积穗数、生育天数、茎鞘叶吸氮量、移栽-分蘖和分蘖-抽穗阶段吸氮量;6）FACE处理显著提高了氮肥偏生产力,降低了每百千克籽粒需氮量,前者平均增加24.16%,常规籼稻增加最多;后者平均降低4.7%,常规籼稻降幅最大。结论 FACE处理可显著提高水稻产量和氮素吸收利用效率,但品种间差异较大。     

Effect of Heat Stress on Grain Growth, Starch Synthesis and Protein Synthesis in Grains of Wheat (Triticum aestivum L.) Varieties Differing in Grain Weight Stability

The effect of heat stress on the components of grain weight was analysed in wheat ( Triticum aestivum L.) varieties differing in grain weight stability. The wheat varieties PBW154, Sonalika and Hindi62 were raised in the field (New Delhi, India; 77°12' E, 28°40' N, 228.6 m a.s.l.) at three dates of sowing: 19 November 1992 (DOS I), 14 December 1992 (DOS II) and 18 January 1993 (DOS III). The late-sown crop (DOS III) experienced 6–8 °C warmer temperatures during grain development than the crop sown at the normal time (DOS I). The heat susceptibility index (S) revealed that grain weight was less susceptible to heat in Sonalika and PBW154 than in Hindi62. Heat stress reduced both the grain growth duration (GGD) and the grain growth rate (GGR). The grain weight reduction in PBW154 and Sonalika was mainly due to a reduction in GGR, while that of Hindi62 was due to a reduction in GGD. In vivo studies on starch and protein synthesis in excised endosperm at 15, 25 and 35 °C revealed that both processes were more thermotolerant in Hindi62 than in PBW154. The grain starch content was stable in Hindi62 while that in PBW154 was significantly reduced under heat stress. The grain nitrogen content at maturity increased in both varieties under heat stress. It was concluded that the heat susceptibility of grain weight in Hindi62 was mainly due to a reduction in GGD, although GGR, starch and protein synthesis were more thermotolerant in developing grains of Hindi62 than in those of PBW154.     

导入AGPase基因的转基因可育水稻及其经济性状的研究

以农杆菌介导法将淀粉合成关键酶AGPase(腺嘌呤二磷酸葡萄糖焦磷酸化酶）基因导入云南地方优质水稻合系35，38，39，41，42中，获得了大量的可育转基因植株。PCR扩增检测，外源基因已稳定整合进水稻基因组中。大量的农艺性状及淀粉含量研究表明，转基因水稻种子的千粒重比对照明显提高，但总淀粉含量没有显著变化。     

Effects of Benzyl Adenine and Abscisic Acid on Grain Yield and Yield Components in Triticale and Wheat

Grain yield and yield components (grains per ear, grain weight, 1000-grain weight, ear weight, ear seed ratio and dry matter partitioning between ear and seed) were examined in a wheat genotype (PBW-343) with well-filled grains and a Triticale genotype (DT-46) with poorly filled grains (showing grain shrivelling) grown in pots. Six days after anthesis (DAA), benzyladenine (BA) @2 µg ear⁻¹ and abscisic acid (ABA) @4 µg ear⁻¹ were injected at the base of the mother shoot ear in both species. It was observed that, in both wheat and Triticale , BA increased the grain weight, grain number and partitioning of dry matter between ear and seed, whereas ABA decreased the grain weight, grain number and dry matter partitioning between ear and seed. However, these decreases were slower in Triticale than in wheat. BA treatment increased the grain dry matter accumulation, which in turn resulted in better filling of grains and increased the grain weight in both wheat and Triticale . The average grain weight of Triticale was lower than that of wheat. Thus, it appears that variation in grain weight between wheat and Triticale might be due to different availabilities of growth-promoting phytohormones such as cytokinins and assimilates.     

谷物冷却机回风利用与节能

分析了谷物冷却机采用回风型冷却的节能原理及优点，回风型冷却具有重要的节能意义。     

Narbon Vetch (Vicia narbonensis L.): A Potential Feed Legume Crop for Dry Areas in West Asia

Provision of feed supplies for the rapidly growing livestock population is essential in West Asia. Shortages can be alleviated by growing forage crops in the existing fallow lands.
Narbon vetch (Vicia narbonensis L.) is a leguminous species with high yield potential, drought tolerance and cold resistance. It could be used for grain and straw production as source for animal feed in dry areas. It is good source of protein with seeds contain 28 % protein yielding 364 kg per hectare protein, whilst straw contains 9 % protein and yields a similar amounts of digestible protein per hectare.
Nine promising lines of Narbon vetch developed at ICARDA were tested at two sites over four years under rainfed conditions. Since climatic conditions were considered to be of considerable importance, each site in each year was treated as a separate environment to give eight environments with annual rainfall varied from 195 to 504 mm.
Narbon vetch possessed high seedling vigour with rapid winter growth and negligible cold damage. Grain yield varied form 0.47 to 1.90 t/ha, with a harvest index varying from 30 to 40 %. The data indicated that below 300 mm rainfall the grain yield varied from 0.47 t/ha when rain fall was 195 mm to 1.4 t/ha when rainfall was 245 mm. Most of the lines had wide adaptation to dry areas in terms of both grain yield and stability. Climate, except early spring rains had little effect on biological and grain yields.     

杂交早稻吸氮特性与产量形成的初步研究

研究了在不同施氮水平下,杂交早稻吸氮特性及其与产量形成的关系。结果表明;杂交早稻威优49亩产500千克左右,植株每亩总吸氮量平均为9.78千克,其中土壤供氮量占52.45%。杂交早稻一生中前期吸氮量占50.72%,中期占31.08%,后期占18.30%,以中期施氮对叶片含氮率影响最大。在高氮水平下,中期施氮导致茎鞘醣含量急剧下降。抽穗前植株吸氮量与每亩发育颖花数呈极显著正相关,但结实率受每朵颖花占有抽穗前醣量的影响。最适 LAI 为6.5～7.5。     

矸酆恐?,垩白率与糙米率、蛋白

Χ灾绷吹矸酆康挠跋焓钦?,直接影响比间接影响大。Study on the correlation between rice quality and agronomic traits of quality riceNIE Cheng rong, WEN Yu hui, WANG Yun bo, CHEN Ming zhong,LI Mei, LIU Dao quan(Agronomy Department, Foshan University , Nanhai 528231,China)The correlative analy     

Quasi-non-linear fracture mechanics analysis of splitting failure in simply supported beams loaded perpendicular to grain by dowel joints

A quasi-non-linear fracture mechanics model based on beam on elastic foundation theory is applied for analysis of the splitting failure of dowel joints loaded perpendicular to grain. Simply supported beams symmetrically loaded by two dowels are considered, and the effects of edge distance, dowel spacing, and distance between dowels and supports are accounted for. The foundation modulus used in the beam on elastic foundation model is chosen so that the perpendicular-to-grain tensile strength and fracture energy properties of the wood are correctly represented. This ensures that a conventional stress analysis and failure criterion lead to the same solution as the compliance method of fracture mechanics. A semiempirical efficiency factor is proposed to account for the influence of the total beam depth, which does not enter the beam on elastic foundation model, but the effect of which is evident from tests. It is shown that the so-called Van der Put/Leijten model, which recently has been adopted in Eurocode 5, appears as a special case of the model presented. Tests on simply supported beams with a single dowel joint at midspan are compared with the theoretical predictions. Various edge distances, beam depths, and spans were tested.