填筑路堤的路堑开挖土石料性能分类研究

提出了以石块为主的用作路堤填料的路堑开挖土石料按岩性进行分类的依据和标准，讨论了用它们填筑路基的施工工艺，质量控制要点及质量指标检测方法。     

混凝土模板用复合竹碎料板工艺研究

用正交试验法研究了施胶量、热压温度和热压时间3个因素对复合竹碎料板物理力学性能的综合影响．结果表明：热压温度是影响板材物理力学性能的主要因素．较佳工艺参数为，施政量12％，热压温度150℃，热压时间22min，板材物理力学性能能满足混凝土模板材料性能的需要．     

Preliminary Research on Regional Material Flow Analysis： A Case Study of Chengyang District in Qingdao

The method ＂Material Flow Analysis （MFA）＂ is one of the effective tools to study law and quantification of material flow between economic system and ecological system. On the national level, economy-wide material flow analysis has been published for a number of countries. However, published studies on the regional or local level are still very limited and a standardized method does not exist yet. On the basis of framework of Material Flow Analysis proposed by Eurostat, the paper collected related data and analyzed material input and output for the Chengyang district in Qingdao. The results showed that DMI （Direct Material Input） and TMR （Total Material Requirement） in absolute number increased about 3.6 and 3.9 times, respectively from 1995 to 2004. Fossil fuel and mineral contributed to about 50.3%-76.3% of DMI. Imports of material increased about 5.0 times and became the most important Contributor to DMI, which showed that local economic growth was highly dependent on resources from other regions and countries. DPO （Domestic Processed Output） and TDO （Total Domestic Output） represent slow increasing trend, and DPO contributed to 22.2%-58.1% of TDO, suggesting local hidden flows were of obvious effect on TDO. The biggest component of DPO is CO2, approximately accounting for 90% of DPO. The material productivity increased 57.7% in last decade, reflecting improvement of efficiency of resources utilization in some extent. However, compared to developed countries and regions, material productivity of Chengyang district was relatively low. Therefore, in order to promote the sustainability, it is essential to develop circular economy and enhance materials productivity.     

普通硅酸盐水泥对石膏基混合胶结材的改性研究

石膏因其耐水性差，强度较低限制了它的应用。采用掺入普通硅酸盐水泥来改善其不足是一种简单，经济实用的方式。本文叙述了在石膏中掺入的普通硅酸盐水泥量不同时，石膏基混合胶结材的强度变化及其耐水性变化等，并探讨了其内在的发展规律。     

国外引进野生苦瓜资源的性状调查研究

对引进的多美尼加野生苦瓜资源主要性状进行了调查、研究,结果表明,野生苦瓜晚熟.叶小茎细.长势旺盛,侧蔓结果为主;果绿色,纺锤形,密布刺瘤,味苦;对白粉病,枯萎病的抗性达到高抗甚至免疫;耐热性、耐寒性远强于栽培种,在抗病和抗逆育种中具有很高的利用价值,但其缺点是果小,肉薄、韧而不堪食.     

竹丝炭化时间对风力发电机叶片阻燃性能的影响

风力发电站常常安装在偏远的海岛、高山或沙漠地区,叶片在使用过程中常受到高温、闪电、野火等等不利因素的影响而烧损,因此,风电叶片材料阻燃性能的选择就显得十分重要.采用HRR3热释放率系统、HC-2氧指数测定仪等仪器,测定并分析经由不同炭化时间处理的竹丝制造的竹增强复合材料的阻燃性能.结果表明:竹丝经10 min炭化处理制造的竹增强复合材料,试件在HRR3热释放率系统测试实验中产生的热释放量峰值最低(99.44 kw/m2),且在5 min内总热释放量最低(339.15 kW·min/m2),氧指数值最高(52),其阻燃性能较好.     

竹青板作为风电叶片复合材料增强相的性能评价

针对目前玻璃钢叶片存在的问题,采用分级竹青板作为风电叶片复合材料的增强相,并利用INSTRON 5582 Grading能力学试验机进行检测.结果表明:由一二级竹青板制成的分级竹青层积材复合材料,其物理力学性能均达到或超过目前国外风电叶片在用的常规木材/环氧层积材的特性,完全能够替代目前大量使用的玻璃钢叶片材料.     

论建筑防水材料

建筑防水材料分为沥青卷材类及高聚物改性沥青卷材类和高分子卷材类三种。防水工程是建筑物的一个重要分部工程，层面防水技术是保证建筑工程结构免受水蚀，内部空间不受水害的一门科学技术。     

Effects of amendments on soil structural development in a clay soil-forming material used as a cap for landfill restoration

Abstract. Restoration of landfill sites to a vegetated after-use is severely compromised if soil-forming materials (SFMs) have to be used as substitute growing media for the restoration cap, owing partly to their poorly-developed structure. The effects of crushed brick material (brick), composted green-waste organic matter (OM) and potassium chloride salt (KCl) in a clay SFM were assessed at the Brogborough Landfill Site (Shank Group plc) in the county of Bedfordshire, UK. Soil structure was characterized three times in a two-year experimental period through measuring drainage water release and aggregate stability and size distribution. Crushed brick and composted OM at 100 t ha⁻¹ improved the ability of the clay to release water by drainage. In addition, the composted OM was associated with an increase in the size of stable aggregates, whereas the brick amendment reduced the overall aggregate stability. The KCl amendment had no consistent effect. Some beneficial structural improvements were thus associated with the brick and OM amendments, although these were rarely significant at the 5% level and the effects declined over time in the absence of vegetation and re-application. Nevertheless, incorporation of crushed brick and organic amendments may offer a potential structure-improving option in clay SFMs prior to vegetation establishment.     

芳樟工厂化育苗技术研究

通过对芳樟工业原料林良种茎尖的离体培养和繁殖 ,探讨芳樟茎尖诱导、分化、不定芽生长分化、生根的适宜的培养基和适宜的培养条件。结果表明 :适宜芳樟茎尖诱导培养基为MS +6 -BAa～ 2amg .L-1+NAAbmg .L-1,诱导率达 70 %以上 ,适宜分化丛生芽的理想培养基为改良MS +6 -BAa′～ 2a′mg .L-1+NAA0～ 2bmg .L-1+GA0～cmg .L-1芽年增殖系数达4 5 12 以上 ,有效芽苗率达 80 %以上 ,适合生根培养基为 1/2改良MS +NAAb′mg .L-1+IBA0～b′mg .L-1或 1/2改良MS +IBAb′mg .L-1+NAA0～b′mg .L-1,或R +IBAc2 mg .L-1+NAAc1 mg .L-1生根率达 98%以上。移栽土壤基质以黄心土加沙(10∶1)理想 ,移栽成活率可达 85 %以上