基于SHPB试验的桦木压缩动力学特性

【目的】利用木材动态压缩加载试验研究热磨机研磨解离破碎阶段木材原料受动态压缩载荷的动力学特性，并研究应变率、加载方向对木材原料动力学特性的影响，旨在深化木材原料研磨解离机制的研究，为热磨法纤维分离设备及磨片的齿形结构优化设计提供理论指导。【方法】利用 Hopkinson 杆试验装置对含水率为12.65%、密度为0.50 g·cm －3的桦木试件进行应变率约为400，800，1200 s －1，加载方向为径向、弦向和轴向的动态压缩试验，获得桦木在不同应变率及方向上动态压缩加载的解离特征、动态应力－应变曲线及相应的力学特性。【结果】对比分析各组试验后试件的破坏形态发现：1)当应变率约为400 s －1时，径向、弦向和轴向加载的试件主要发生塑性变形；2)当应变率约为800 s －1时，径向加载试件被解离成几大块，并且有一些“火柴棍”状的小试件从大试件上剥离；弦向加载试件沿加载方向上产生更大的塑性变形，并且在试件上、下两端处沿加载方向产生贯穿性裂纹，试件被解离成三大块；轴向加载试件受载面边缘处的纤维大量产生压溃现象，在加载面上产生贯穿性裂纹且有片状小试件从大试件上剥离；3)当应变率约为1200 s －1时，径向加载试件被解离成大量“火柴棍”状的小试件，并且小试件的尺寸明显小于应变率为800 s －1时；弦向加载试件沿加载方向上产生的塑性变形与应变率为800 s －1时相当，但是试件上端处被解离成许多片状的小试件，并且沿加载方向试件上产生了数条贯穿整个试件的大裂纹；轴向加载试件被解离成大量短粗状的小试件，并且小试件上带有明显的褶皱。对比分析各组试验试件的应力－应变曲线发现：1)动态压缩加载条件下桦木的应力－应变曲线可以由屈服点应变分为弹性阶段和屈服后弱线性强化阶段2部分；2)桦木沿径向加载应变率约为400，800，1200 s －1时，其屈服强度和韧性模量分别为4.56，10.49，14.22 MPa 和2.88，8.32，20.70 kJ·cm －3，应变率从400 s －1增加到1200 s －1时，屈服强度和韧性模量分别增加了2.11和6.19倍；3)桦木沿弦向加载应变率约为400，800，1200 s －1时，其屈服强度和韧性模量分别为5.87，7.90，9.65 MPa 和2.53，7.41，12.92 kJ·cm －3，应变率从400 s －1增加到1200 s －1时，其屈服强度和韧性模量分别增加了0.64和4.10倍；4)桦木沿轴向加载应变率约为400，800，1200 s －1时，其屈服强度分别为22.90，71.41，96.37 MPa 和18.79，67.74，114.32 kJ·cm －3，应变率从400 s －1增加到1200 s －1时，其屈服强度和韧性模量分别增加了3.21和5.08倍。【结论】随着应变率的增加，桦木的解离程度加大，径向加载最易解离，轴向加载最难解离；桦木的动态压缩屈服强度、动态压缩韧性模量具有很强的应变率敏感性，是一种应变率敏感材料。     

基于DPSA算法的“单库-单站”水资源优化调度方法研究

提出了单座水库与单座补水泵站水资源优化调度的非线性数学模型,模型以年内各时段的缺(弃)水量的平方最小为目标函数,各时段水库供水量和泵站引提水量为决策变量,各时段水库库容为状态变量,以年调节水库可供水量、泵站年引提水总量、水库与补水泵站的联合运行准则(泵站闲时补库、忙时供水)等为约束条件,并以南水北调东线一期江苏境内"骆马湖-皂河站"为实例,采用动态规划逐次逼近法进行求解。结果表明,相同供水保证率时,50%、75%、95%来水频率下泵站补水量、缺水量、弃水量比常规调度均有减少。     

水电站进水塔结构分析方案研究

水电站进水塔结构的安全直接关系到整个电站的安全和效益。采用三维有限元法分别建立了实体单元模型和梁单元与实体单元混合模型,开展了静、动力分析研究,对两种模型的计算结果进行了对比。结果表明,水电站进水塔采用两种模型计算的结果呈现出相同的规律。水电站进水塔结构分析可采用以实体单元模拟的成果作为结构分析的基础,在前部拦污栅框架部分的内力分析和配筋计算上以梁系与实体联合模拟的成果作为有效补充,为工程设计提供更为科学合理的参考依据。     

土地利用动态监测中多源影像融合方法的比较研究--以陕北黄土丘陵沟壑区为例

在陕北黄土丘陵沟壑区,采用单一传感器的遥感影像提取土地利用信息,存在着识别的土地利用类别少、某些类别混分现象较严重、分类结果的精度较低等问题。以TM多光谱数据和SPOT全色光谱数据的融合为例,提出了适宜于该地区的两种影像融合方法:主成分变换法和乘积运算法,并从影像的光谱质量、纹理信息和目视效果等方面对其进行了对比与评价。结果显示,主成分变换法为较理想的融合方法。以陕北无定河流域为实验样区的土地利用自动分类结果表明,该方法的应用使土地利用各类别的提取精度都有不同程度的提高;水体、水田和城镇用地等面积较小的类别分类正确率提高达到10%以上;坡耕地与林草地的混分明显减少,分类精度均提高了5%以上;分类总精度从82.0%提高到89.2%,取得了良好的分类效果。此研究对于遥感影像融合技术的评价与应用进行了有益的探索,同时为该地区的土地利用动态监测提供了关键技术。     

磷化铝动态潮解膜下环流熏蒸生产性试验

磷化铝动态潮解法是配合环流熏蒸使用的一种新型施药方法，本试验结合我库的具体情况，将动态潮解与膜下环流熏蒸有机结合起来，有效地解决了仓房气密性、有效时间、害虫再次感染等问题，大大提高了熏蒸杀虫效果，为抗性害虫的综合治理探索出一条新路。     

Application of Multi-vertical-line-element Model of RC Walls and Discussion on IT

The inelastic dynamic response analysis program for frame-shear wall structures developed by the authors is introduced firstly, in which the multi-vertical-line-element model was adopted for shear walls and the refined single-component model was used for beams and columns in frame.By analyzing three-story structural models tested in shaking-table in a famous foreign research institute, the validity of the modeling of shear wall in the program was verified. The analytical results indicate that the inelastic dynamic responseof shear walls under random ground motion input can be predicted effectively withthe program. Finally, with the preliminary discussion of some key points in modeling of shear wall, some suggestions areput forward for further improving and refining the multi-vertical-line-element model.     

Two Types Modules for the Boiler Attached to 330 MW Unit

Boiler is an important facility in power plant , the safety and economy of unit is affected by it. Studying the dynamic of boiler can improve the knowledge about boiler , which is important for. Features of MMS are introduced based on MMS simulation setting, and the real time capable module and non real time capable module are compared from principle. Real time capable dynamic model of boiler and non real time capable dynamic model of boiler of 330 MW unit are established . The experimental results show that the dynamic process of two type model accords with the mechanism of the object , at the same time, the validity of real time capable module is discussed .     

Nonlinear Characteristic Modeling of Servo Value on Hydraulic Bending Roll System''s Dynamic Characteristic

Nonlinear characteristic of servo value is the important factor influencing hydraulic system, the model of electro-hydraulic servo pressure control system is designed. In this model, flux-equation of servo valve is specially applied and some non-linear characteristics are considered. Furthermore, SIMULINK toolbox of MATLAB language software is applied to solve mathematic model and simulation curves of some variables are obtained. The calculation results are in good agreement with the experimental results.     

Analysis on Limitation of Present Urban Planning in China

In urban design, only by continuous and dynamic research work from design to finally putting it into practice, can we made good control on city appearance. This article analyzes nowadays defects in our urban design from two aspects as the result establishment and validated control, and tries to conceive a feasibility plan to solve the problem.     

The BPR Facing the Dynamic Union

With the rapid development of the manufacture, the technology of information and net, the traditional management of enterprise cannot meet the demands of the market, to get a better development and benefit, enterprises have to keep a competitive and cooperative relation with each other. Thus is the beginning of the dynamic union. Combining the theory of dynamic union with BPR, this thesis proposes the BPR facing the dynamic union and expounds the principle of it, the re-engineering of the full life cycle and the evaluation method of re-engineering on the base of analyzing the characteristic of dynamic and demands of process.