正交试验优选地锦草颗粒成型工艺

为优选地锦草颗粒成型工艺,以可溶性淀粉用量、乙醇浓度、阿司帕坦用量为考察因素,以制粒难易程度、外观、粒度、溶化性、口感及其综合评分为指标,采用L9（34）正交试验优选成型工艺。最佳成型工艺是可溶性淀粉用量为70%,乙醇浓度为75%,阿司帕坦用量为0.50%,测得临界相对湿度为65%。     

基于水经注探讨乌兰布和沙漠景观形成问题

根据北魏时期郦道元地理名著《水经注》中关于乌兰布和段黄河故道及其与黄河沿岸古城的位置关系,修正了有关现在黄河河道来源、沃野故城被黄河改道冲毁等论断,并从沙源与沙漠内涵、地表大面积流沙裸露堆积形成沙漠景观以及《水经注》中没有记录乌兰布和段沙漠景观等方面探讨了在乌兰布和沙漠景观的形成时间问题。     

Zr-ATP复合吸附剂的制备及其吸附除磷效果探究

指出了磷是导致水体富营养化的核心元素之一,利用碱酸复合改性凹凸棒石（ATP）,经成型处置制备了一种新型ZrATP复合吸附材料,考察了其对水中磷酸根的吸附性能。结果表明：成型的Zr—ATP复合吸附剂在常温、常压下进行静态除磷实验,除磷效率达99％,吸附容量达7．7mg／g,是值得进一步深化研究的富营养化修复剂。     

基于DYNAFORM板料成形模拟

凹模圆角半径、冲压速度、压边力和拉延类型对板料成形影响较大,文章通过试验优化成型工艺参数,获得了较为理想的板料成形效果,其成形工艺为:采用单动拉延,凹模圆角半径为18mm,压边力为100k N和冲压速度2000mm/s。     

家蚕造卵机制受激素调控作用的研究 Ⅰ.家蚕幼虫期使用保幼激素类似物、蜕皮激素对生殖的效应

本文以保幼激素类似物ZR-515和20-羟蜕皮酮添食四、五龄期的家蚕,探讨其生殖效应(造卵)。结果表明:(1)JHA和MH不仅能显著影响茧质性状,对生殖生物量也有显著效果。四龄第1日和五龄前4日施用JHA,对总造卵生物量具有明显的增值效应;五龄后期(第6—7日)使用MH,具有显著的减值效应。两种激素的这种生殖效应与雌蛹体重具有较好的一致性。(2)根据对生殖指标的分析,激素类在幼虫期使用,其生殖效应以改变成熟卵粒数为主,影响卵重为辅。(3)经对成熟卵蛋白和糖元含量测定发现;卵蛋白含量和卵糖元含量与激素的生殖效应相平行。     

草坪草茎枝扦插研究

阐述了以本特一号、狗牙根茎枝作扦插材料，采用单品种、间作和混作方式在春、秋季扦插的草坪成活率高、成坪周期短、覆盖度大、投入成本低。省工、省料，环境、经济和社会效益好。通过试验发现了本特一号、狗牙根不定根起源和生长发育机理，阐述了扦插草坪的新方式技术，发展和丰富了草坪扦插的理论和技术方法。     

COMPUTER ALDED DESIGN OF FORMING CUTTER FOR REVISING INVOLUTE HELICAL

In this paper, a calculation method of forming cutter contour of involute helical with arbitrary easement is presented, the segmantal arcs of the best uniform approximation and tolerance to fit smoothly the cutter contour points are used the profile on the cross section of the helical is calculated and the design of the cutter is examined. The method can be used to design precision forming cutter of involute helical with the arbitrary easement. It is valuable in engineering application.     

Forming process of asymmetric wall forging

Asymmetric wall products are widely used in the engineering. However, there are many limitations in the traditional forming processes employed to produce them. Oil pump stator has been studied as an instance to present the forming process of asymmetric wall products. First, a theoretical analysis of the forging's forming process has been made. Second, a rigid-visco-plastic finite element model of oil pump stator has been constructed and three dimensions FEM simulation and analyzing of extruding process have been taken by employing the simulation software. At last, parameters of the forming process have been optimized, the rule of forging's metal flow in the forming process has been analyzed and some distributions of stress and strain have been offered. These data can be use to direct the production of the other asymmetric wall forgings.     

草菇厚垣孢子形成条件的研究

本文报道有关草菇厚垣孢子形成的条件.其中,营养丰歉状况直接地影响孢子产生的迟早与数量,磷、镁的存在,弱酸性条件和30～35℃温度范围有利于孢子的产生。