Recommendations on Shrinkage and Temperature Reinforcements in Concrete Slabs

The mechanism of shrinkage cracking is discussed with a simple member, which is fully restrained and subjected only to an axial restraining force caused by shrinkage, while a simple procedure is presented for the determination of the number and spacing of the cracks and the average crack width. With the simple model, some examples are shown to compare the provisions for minimum shrinkage and temperature reinforcement in GB 50010-2002 Code, ACI 318-02 Code and AS 3600-1988 Code. The results show that the provisions in GB 50010-2002 Code are too weak in comparison with the others. Finally, some recommendations are proposed.     

Pricise Processing on 3D Surface with Laser

Studyin g the processin g tech n ology of mak in g holee by laser com plicated sur-face,and developing a CAD/CAM flexible manufacture system.     

Nanometer Scale Surface Roughness Measurement Based on AFM

The datum line and mainly three profile height parameters of surface roughness are briefly introduced and the operation principle and system structure of AFM. IPC - 208B with high-resolution, which was successfully developed by Chongqing University, are described in detail, and the emphasis is laid on its application on the nanometer scale surface roughness. Taking stainless steel for example, its micro-structure was observed, and the surface data were analyzed and transacted by special evaluator and the values of three profile height parameters were obtained. Finally the experimental results are briefly analyzed.     

用ImageWare实现缺损点云的曲面重构

针对有缺损的点云数据,提出了在逆行工程软件ImageWare平台下进行曲面重构的途径;介绍了运用逆向工程技术进行CAD模型设计的操作流程;用平行面截取点云数据,拟合出曲线线条;通过对曲线条的桥接,利用完整的曲线条重构出曲面。     

保护性耕作条件下松耕作业机具的探讨

松耕作业能打破犁底层、恢复土壤结构，形成适宜农作物生长的土体构造，是提高地表积温和作物产量的有效措施之一。为此，探讨了在秸秆覆盖条件下各种松耕作业机具的工艺特点及机具在保护性耕作播前作业中的适应性。     

Surface drainage requirement of crops: Application of a piecewise linear model for evaluating submergence tolerance

Crop tolerance to land submergence is an important criterion for designing a surface drainage system for agricultural lands. This paper collates the available data from various places in India related to the studies on the submergence tolerance of crops. The paper hypothesizes that a piecewise linear model could be used to describe crop response to land submergence. According to this hypothesis, there would be no yield decline for a few initial days of submergence. If submergence continues beyond this period then there would be linear decline in yield. The unknown parameters in the model are: optimum yield, threshold time and the slope which represents the per cent yield reduction per day of additional submergence beyond the threshold.Data in respect of wheat, pigeon peas, cowpeas, pearlmillet, maize and groundnuts indicate that the model describes the data well, although in many cases the threshold is 0.0. The yield reduction varies from 5.3 to 23.2% for each day of submergence beyond the threshold. It appears that to allow for more than 1–2 days of submergence will result in more than 10% reducation in yield of dryfoot crops. For the maize crop, the seedling stage is the most sensitive stage followed by the silking stage. The grain formation stage is the least sensitive, although even at this stage the threshold is 0.0 and yield reduction is 9.3% for each day of submergence beyond the threshold. The data for 9 test crops from Texas and Venezuela were well described by the model. It is concluded that the piecewise linear model is a useful tool for describing submergence tolerance of crops and for working out surface drainage requirements for a given level of yield reduction. Frequency analysis of the daily rainfall data from some selected locations indicates that there is every likelihood of submergence at most of the stations. It is suggested that there is an urgent need for developing wet farming techniques analogous to dry farming techniques.     

空间机构连杆的运动分析

建立了空间连杆机构的分析模型,利用矢量回转法确定了空间机构连杆上沿任一直线作匀速运动的动点轨迹矢量方程,即动点轨迹方程,并进一步地对矢量方程进行微分求出动点在任一瞬时时刻的速度和加速度;建立了空问机构连杆上任一直线的轨迹曲面方程,即连杆曲面方程;再应用MATLAB函数绘制了空间机构连杆上任一直线上动点的轨迹曲线、速度和加速度图以及连杆曲面图,为空间机构研究和机器人设计提供了理论基础.     

响应曲面法优化气体射流冲击锥栗脱壳工艺

为了优化锥栗气体射流冲击脱壳工艺,采用响应曲面法分析了冲击温度（163～197C）、加热时间（109～311 s）及气流速度（6.68～9.73 m/s）对于脱壳锥栗品质（失水率、脱壳率、色泽L＊值）的影响,并建立了相应的预测模型.方差分析的结果表明：冲击温度、加热时间及气流速度对于失水率、脱壳率和色泽L＊值这三项指标都有着极为显著的影响.优化所得的较优工艺参数为：冲击温度1 79℃,加热时间278 s,气流速度7.83 m/s.对应的失水率、脱壳率及色泽L＊值的预测值分别为：4.14%、86.95%和58.65.经试验证明：应用响应曲面法所得到的脱壳工艺参数是可行的.     

越冬期地面灌溉技术研究

基于越冬期大田土壤入渗和灌水试验,采用试验研究和模拟分析相结合的方法,分析讨论了冬灌水流运动特点,揭示了表征灌溉效果的各项指标随地中温度的变化特性,提出了提高越冬期灌溉灌水效果的5项技术:短畦灌溉技术、长畦灌溉技术、小流量灌溉技术、秋耕灌溉技术和最冷月免灌技术。研究结果对我国北方缺水地区冬季合理灌溉具有重要指导意义。